All PENNY GILES CONTROLS catalogues and technical brochures

P. 1

TECHNO FOR INDUSTRIA SE LEADERS IONTROL, CTUATION Joysticks+Sensors+Solen

P. 2

Penny + Giles: A history of Innovation In Motion With a proud legacy spanning more than half a century, Penny+Giles is a recognised leader in position sensing, actuation and manual control for industrial applications. Penny+Giles...

P. 3

JOYSTICK CONTROLLERS A comprehensive range of joysticks that utilise non-contacting and contacting technologies for fingertip and hand or palm control. With protection to IP69K, and a choice of models, handles and mounting configurations to...

P. 4

SOLENOIDS and SOLENOID VALVES Our wide product range (formerly branded MECHETRONICS) includes standard configurable designs in a range of solenoid styles, but we can also supply modified standard designs to suit specific appli- cations, or...

P. 5

SENSORS A comprehensive range of position sensors that utilise non-contacting and contacting technologies for linear, rotary and tilt measurement sensing. With protection to IP69K, and a choice of models and mounting configurations to suit a...

P. 1

SLT190 LINEARPOSITION TRANSDUCERInnovation In Motion

P. 2

INNOVATION IN MOTIONThe SLT190 linear position transducer is designed to provide reliable, fit-andforget position sensing within a compact transducer size for the most arduousoperating environments. The transducer uses an innovative single coil inductiveoperating...

P. 3

S L T 1 9 0 LINEARPOSITION TRANSDUCERRugged mounting styleThe patented operating principle of the SLT190 position transducer uses acore moving within the transducer body to supply the signal proportional toouter sleeve displacement. The outer sleeve design...

P. 4

S L T 1 9 0 LINEARPOSITION TRANSDUCERPERFORMANCEELECTRICALElectrical stroke range Emm25 to 500Stroke incrementsmm25 to 200 in 25mm increments250 to 500 in 50mm incrementsNon-Linearity*%ResolutionTemperature coefficientEnhanced - typically less than ±0.2%...

P. 5

SIGNAL CONDITIONINGSee page 6 for full EICT module performance and dimensionsInput voltageVdc+10 to +60 nominalstandardVdc0.5 to 4.5optionsVdc0 to 5, 0 to 10, ±2.5, ±5, ±7.5, ±10 (using Voltage Module VM output option card)mA4 to 20...

P. 1

ICS100IN-CYLINDER SENSORSInnovation In Motion

P. 2

INNOVATION IN MOTIONICS100 is a range of In-Cylinder linear position sensors designed forintegration into hydraulic and pneumatic actuators where the sensor is fittedinside the pressurised environment. Using the proven benefits of Hybrid TrackTechnology...

P. 3

I C S1 0 0IN-CYLINDER LINEARPOSITION SENSORSRemovable contact slider assemblyThe ICS100 is designed for easy integration into either hydraulic or pneumaticactuators and is supplied with a contact slider ring that can be easily removed from thesensor when...

P. 4

I C S1 0 0IN-CYLINDER LINEARPOSITION SENSORSPERFORMANCEElectrical length EmmResistance ±10%kΩ1 per 25mm lengthIndependent linearity±%0.25 for 25 to 70mm lengths25 to 200 in 5mm increments210 to 1100 in 10mm increments (Up to 1600mm can...

P. 5

DIMENSIONSExtended tap positionRetracted tap positionINTERNAL FLANGEElectrical length E1.5ø19.9419.843 core cable 19/0.15ETFE insulated with PURsheath 1 or 10m long11.5Max. with end supportbearing fitted1010Slider ringø25.0024.97ICS100/IN13.5324.504.2510.9710.874.804.6017...

P. 1

Penny+Giles A Curtiss-Wright Company

P. 2

INNOVATION IN MOTIONPenny+Giles SRS280 sealed rotary sensors and SRS880 submersible rotarysensors have been specially developed to provide maximum performance underextremes of temperature, humidity, vibration, shock and immersion.Hybrid trackPenny+Giles...

P. 3

SRS280 sealed rotary sensorThe SRS 280 sealed rotary sensor has been specially developed to meet the harsh requirements of today’sautomotive, motorsport and industrial position sensing applications. Interchangeable with the popular 38mmfixing centres...

P. 4

S R S 2 8 0 SEALEDR OTA R Y S E N S O RPERFORMANCEELECTRICALElectrical angle ±2°ΩResistance ±20%Hysteresis (repeatability)°10 to 350 in 10° increments14.3 per degree< 0.03< 1 degree (e.g. ±0.3% over 330°,...

P. 5

SRS280/..... /..... /..... /.....ORDERING CODESCable A = 0.5m, B = 2mShaft sealing 50 = IP5068 = IP68Electrical angleShaft style D = D shaftS = Sprung shaftH = 2.4mm blade shaftDIMENSIONSNote: drawings not to scaleø48.0017.2014.30ø38.00 PCD8.50ø10.0009.975ø28.0020°16.007.003.50ø5.104.50ø3.60Stainless...

P. 1

STT SERIESSEALED TILT SENSORSInnovation In Motion

P. 2

INNOVATION IN MOTIONThe Penny+Giles STT series of sealed tilt sensors have been designed to providereliable, fit-and-forget tilt measurement sensing for the most arduous operatingenvironments. The STT280 is supplied in a compact 28mm diameter body withcrush...

P. 3

STTseries SEALED TILT SENSORSInnovative, rugged design – superior protectionThe STT series have been designed to offer the best combination of materialsand mounting styles that ensure survivability in the most rugged applications.We use sealing...

P. 4

STT280 S E A L E DT I LT S E N S O RPERFORMANCEELECTRICALMeasurement range°±10, ±20, ±30 or ±60Supply voltageVdc8 to 30 (unregulated) and 5 ±0.25 (regulated)Over voltage protectionVdcUp to 40 (-40 to +90°C)Maximum supply...

P. 5

±60º±30º±20º±10º100.0%4.5Output voltage (V)[Unregulated 8-30V Supply Mode]5.090.0%4.080.0%3.570.0%3.060.0%2.550.0%2.040.0%1.530.0%1.020.0%0.5Voutput/Vsupply (%)[5V Supply Mode]OUTPUTCHARACTERISTICS10.0%0.0-600.0%-40-50-30...

P. 1

SLS & MLS SERIESLINEAR POSITION SENSORSInnovation In Motion

P. 2

INNOVATION IN MOTIONThe SLS and MLS series of linear position sensors are designed to providemaximum performance benefits within an extremely compact size. Using theproven benefits of Hybrid Track Technology and including a number of innovativedesign...

P. 3

L I N E A R POSITIONSENSORSHigh integrity reduces system costHybrid track technology sensors used in a control system allow simple, low current electronics to be used, while the lowhysteresis, low electrical noise and the self-compensating effect for...

P. 4

S L S 0 9 5 LINEARDISPLACEMENT SENSORSLS095 is designed to provide maximum performance benefits within anextremely compact body diameter of 9.5mm, with stroke lengths from 10 to100mm. The miniature size of this sensor makes it ideal for applications inrobotics,...

P. 5

SELF ALIGNING BEARING MOUNTINGDIMENSIONS ANDMOUNTING OPTIONSD fully retracted ±1 adjustmentNote: drawings not to scale19.0 + 1.0ø9.5E + 0.5- 0.0Rod end bearingø2/2.15mounting holeboth ends3 core cable 7/0.12534ø9ø9.51minM + 1.0-...

P. 1

JC150 SINGLE AXISJOYSTICK CONTROLLERInnovation In Motion

P. 2

INNOVATION IN MOTIONThe JC150 single-axis joystick controller is designed for demanding operatorcontrol applications in off-highway vehicles and other man-machine interfaces,where lever strength, signal reliability, and handle functionality are important.The...

P. 3

J C 1 5 0 SINGLE-AXISJOYSTICK CONTROLLERTotal reliabilityThe JC150 includes lever mechanics designed to give smooth proportionalcontrol, and has been designed to withstand a load on the handle up to 300N,measured 135mm above the panel. Conductive plastic...

P. 4

J C 1 5 0 JOYSTICKCONTROLLERPERFORMANCEMECHANICALSelf centering (standard) or friction lock (FL option)Lever actionMaximum allowable force**Lever operating angle4.9 to 10.7 (standard)13 to 17 to overcome detent - FL optionN16.8 to 21.5 (Standard - full...

P. 5

J C 1 5 0 JOYSTICKCONTROLLERDIMENSIONS66.0Note: drawings not to scale82.558.05.0INSTALLATIONThe joystick is designed to be fitted from44mm diameter hole. The effectiveness2 x 2 holes13.0mm deepto suit M5threadformscrews.+Y axisHoles to suit M5Choose one...

P. 1

P. 2

P. 3

P. 4

P. 5

P. 1

P. 2

P. 1

P. 2

P. 1

P. 2

P. 1

P. 2

P. 1

P. 2

P. 1

P. 2

P. 3

P. 4

P. 1

P. 2

P. 1

P. 2

P. 3

P. 4

P. 1

P. 2

P. 3

P. 4

P. 1

P. 2

P. 3

P. 4

P. 1

P. 2

P. 3

P. 4

P. 1

P. 2

P. 3

P. 4

P. 1

STANDARD AND CUSTOMSOLENOIDS FOROEM APPLICATIONS

P. 2

The CompanyPenny+Giles are the UK’s leading supplier of solenoids - withmanufacturing facilities in both Europe and Asia. Our solenoid businesswas originally founded in 1918, and was more recently known as theMechetronics brand. The business has...

P. 3

GC0416Pull or thrust types availableOptional voltage ratings16mm x 8mm x 12mm100% power 0.8 watts dc0.03N force at 1mm strokeGD0420Pull or thrust types availableOptional voltage ratings20mm x 11mm x 10mm100% power 1.1 watts dc0.2N force at 1mm strokeMD0837Pull...

P. 4

www.pennyandgiles.comPenny+GilesSolenoids, joysticks and positionsensors for commercial andindustrial applications.Unit 50, Innovation HouseSouth Church Enterprise ParkBishop AucklandCounty DurhamDL14 6XBUnited Kingdom+44 (0) 1388 771200+44 (0) 1388 772490...

P. 1

1. IntroductionA large number of application possibilities, simpledesign and long service life make Penny+Gilessolenoids cost-effective solutions for the mostselected problems.Applications range from general machineconstruction through plant engineering,...

P. 2

Penny+Giles Controls LtdUnit 50, Innovation House, South Church Enterprise ParkBishop Auckland, County Durham DL14 6XBTel: +44 (0) 1388 771200 Fax: +44 (0) 1388 772490solenoids@pennyandgiles.comwww.pennyandgiles.com© Penny+Giles Controls Ltd 20118....

P. 1

JC3000 FINGER OPERATEDJOYSTICK CONTROLLERInnovation In Motion

P. 2

The JC3000 joystick controller is designed for demanding applications inremote control chestpacks or auxiliary functions on industrial vehicles andother man-machine interfaces, where precise control, signal reliability, andcompact size are important....

P. 3

Potentiometric sensingDesigned to interface with an electronic controller, the long-life potentiometertrack generates analog outputs with switched reference signals that areproportional to the distance and direction over which the handle is moved. Theanalog...

P. 4

JC3000PERFORMANCEMECHANICALLever breakout torque XY NmLever operating torque XY NmLever detent torque XY NmMaximum allowable torque XY NmLever operating angle °Lever actionLever gate profilesDetent angles °Maximum Z axis torque NmExpected lifeWeight...

P. 5

5ANALOG TRACKDIAGRAMMULTI PIN CONNECTORDIAGRAMAll potentiometer track and directional/center/handle switch connections terminate in a 12-wayHirose DF3-12P-2DS(01) series connector on each joystick axis – a mating connector and flylead isavailable...

P. 1

SLH100 HALL EFFECTCONTACTLESS LINEAR SENSORInnovation In MotionCertificate No. LRQ 0924881Quality AssurancePenny+Giles are accredited to BS EN ISO9001:2000Quality is at the heart of all our systems ensuring thereliability of our products from initial...

P. 2

PERFORMANCEELECTRICALSupply voltage VdcOver voltage protection VdcMaximum supply current mAReverse polarity protectionShort circuit output to V supplyShort circuit output to GNDResolution mmNon-linearity %Electrical length mmRange accuracy mVVoltage output...

P. 1

DLS >SERIES DRAW WIRE LINEAR SENSOR S >Innovation In Motion size="-2">

P. 2

INNOVATION IN MOTION The DLS series of draw-wire linear position sensors are a cost effective way tomeasure linear displacements up to 5000mm in the most demanding industrialenvironments. Using proven potentiometer and encoder technologies to provideanalog...

P. 3

DLS DRAW-WIRE LINEAR SENSORS Choice of models The DLS linear sensors cover a measuring range from 100mm to 5000mm in three models. The P60 offers 100 to1500mm range with a choice of three analogue and two digital output types. Models P96 and P115...

P. 4

D LSSERIESP6 0

P. 5

DLS SERIES P60DIMENSIONS ANALOGUE OUTPUTDLS - ..... - P60 -CR - PDIGITAL OUTPUTDLS - 1500 - P60 - CR - EANALOGUE OUTPUTDLS - .... - P60 - SR - U/IDimensions for mounting digitaloutput version (1500mm only)Dimensions for mounting analogueoutput version...

P. 1

JC6000 MULTI AXIS JOYSTICK CONTROLLER Innovation In Motion >

P. 2

INNOVATION IN MOTION The JC6000 rugged joystick controller is designed for demanding operatorcontrol applications in off-highway vehicles and other man-machine interfaces,where strength, reliability, and handle functionality are important. Available inone...

P. 3

JC6000 MULTI-AXIS JOYSTICK CONTROLLER Total reliability The JC6000 includes lever mechanics designed to give smooth proportionalcontrol, with Hall effect sensors that provide contactless, long life operation up to15 million operations. Alternative...

P. 4

JC6000 joystick controller PERFORMANCE MECHANICAL Lever operating force breakout* N operating* N maximum allowable** N Lever mechanical angle single axis only ° square gate ° Seat Expected life Weight g...

P. 5

Ω at 50Vdc*The long life resistive elements require a high impedance load in the wiper circuit to minimisethe current flowing through the wiper for optimum life conditionsNot available with CANbus output1.5 or 5 either side of center35200 resistiveAll...

P. 1

UCM UNIVERSALSIGNAL CONDITIONING MODULE Innovation In Motion >

P. 2

INNOVATION IN MOTION The new Penny+Giles model UCM is a low powered Universal ConditioningModule designed to operate with a wide range of LVDTs, RVDTs and otheranalogue inductive transducer types. The set-up is simple and flexible, allowinguser adjustment...

P. 3

UCM FOR INDUCTIVE TRANSDUCERS PERFORMANCE ELECTRICAL Power requirement Supply voltage range Vdc Supply current mA 10 to 30 unregulated (limited to 13.5 minimum on certain ranges - see output options table) 10 maximum (plus transducer...

P. 4

Output option Supply voltage range Vdc UCM UCM with UCM with UCM with Single or (Dual) supply VM card CM card PWM card 0.5 - 4.5Vdc 10 - 30 or ± (10 - 30) / N/A N/A N/A 0 - 5Vdc 10 - 30 or ±...

P. 5

ELECTRICAL CONNECTIONS LVDT ConnectionsInput/Output Connections Screw terminals >S1+S1-P1P2S2-S2+GND +V supply0V supply-V supply (dual supply only)Output ground 0VOutput signalMulti-channeloperation VPOSGNDVNEGGNDOUTPUTSYNC IN SYNC OUT See connections...

P. 1

JOYSTICK CONTROLLERS FINGER OPERATED Innovation In Motion >

P. 2

INNOVATION IN MOTION The Penny+Giles range of finger operated joystick controllers have beendeveloped for the smooth, precise control of critical functions in a variety ofindustrial applications where a Human-Machine Interface (HMI) is required. Available...

P. 3

JOYSTICK CONTROLLERS FINGER OPERATED Innovative design The Penny+Giles joystick range are displacement joysticks that provide electricalsignals in direct proportion to the movement of the lever. Two different types ofsensing technology are utilised...

P. 4

JOYSTICK CONTROLLERS FINGER OPERATED Total reliability By using design innovation, careful materials selection and extensive real-lifeapplications knowledge, Penny+Giles engineers have developed a range ofjoystick controllers that require no maintenance...

P. 5

RUGGED JOYSTICK CONTROLLERS HAND OPERATED Penny+ Giles can also supply a range of hand operated joystick controllers for demanding operator control applications in off-highway vehicles and other Human-Machine Interfaces where ultimate strength,...

P. 1

SSC SENSOR SIGNAL CONDITIONIN G MODULE >Innovation In Motion size="-1">

P. 2

INNOVATION IN MOTION The new Penny+ Giles model SSC is a Sensor Signal Conditioning unit housed in an IP68 protected metal enclosure. It is suitable for use with any sensor that produces a dc output signal voltage in the range 0 - 5Vdc. The SSC...

P. 3

10 - 30 unregulated When optional Voltage Module ( VM ) card is fitted, a -10 to -30Vdc negative supply mayalso be connected to increase current sinking capability and reduce noise. If a negativesupply is not connected, the VM card automatically generates...

P. 4

Penny+Giles A Curtiss-Wright Company C www.pennyandgiles.com4 o -j Penny & Giles Position sensors and joysticks for commercial and industrial applications. 15 Airfeld Road Christchurch Dorset BH23 3TG United Kingdom + 44 (0) 1202 409409...

P. 1

DIGITALPANEL INDICATORS Innovation In Motion >

P. 2

INNOVATION IN MOTION Universal input Indicators - DMP200 series Features The DMP200 series of universal input indicators offer unparalleled price andperformance and are ideal for industrial test and process applications. Surface mountand microprocessor...

P. 3

DIGITAL PANEL INDICATORS Features LVDT input Indicators - DML300 series ?Fast-Calђ calibration?Adjustable display resolution?Maximum / minimum memory?Isolated analogue output?Two logic inputs?Front panel function buttons?Transducer excitation...

P. 4

DMP200 SERIES DISPLAY Type 14.7mm high, high brightness red LED Range -19999 to +99999 (DMP230, DMP240) -1999 to +9999 (DMP210, DMP220) Update Rate 2 per second > A/D CONVERTER Dual slope integrating with auto zeroConversion rate 10 per second...

P. 5

FUNCTION KEYS One or more of the stated functions can be user assigned to either of the two front panel function buttons: Tare, auto zero, display hold, display maximum, display minimum, display average, display test, reset max/ min & average...