Electronic Suspended Pedal The Electronic Floor Pedal WM-554 designed commercial and industrial vehicle applications. The unit is equipped with a Hall Effect non-contact sensor that can be programmed for analog output. The electronics are IP67 sealed and highly EMI resistant (SAE J1113). The Electronic Suspended Pedal WM-554 is available with a nominal 19.5 degree angular rotation. The Throttle Control has a engineered plastic body and lever arm. The mounting bracket is made out of coated steel. Both lever arm and bracket can be customized to optimize driver ergonomics. SPECIFICATIONS PRODUCT LIFE Full Travel Cycles Electronics IP67 sealed (IEC 60529) SAE J1113 Compliant Output Signal TRAVEL ANGLE Operating Force (at 200mm from pivot point) Static Load Vibration Idle= 17N, Full Travel = 35N 667N @ 200mm Random broadband up to 4g (3-axis, 3 hr. each axis,) Operating Temp Range Storage Temp Range Humidity Sand/Dust Base plate Foot treadle Body castings Corrosion Resistant Plated Steel Composite Plastic Composite Plastic

TYPICAL OUTPUT CHARACTERISTICS (Other outputs are available) © 2015 Curtiss-Wright. All rights reserved. Specifications are subject to change without notice. All trademarks are property of their respective owners. USA Portland Oregon T: +1.503.684.8600 F: +1.503.684.3879 [email protected] www.cw-industrial.com Christchurch United Kingdom T: +44.1425.271444 F: +44.1425.272655 [email protected] www.cw-industrial.com Shanghai China T: +86.213.3310670 [email protected] www.cw-industrial.com