PGFM3000 Series
3Pages

{{requestButtons}}

Catalog excerpts

PGFM3000 Series - 1

PGFM3000 Series Standard motorised faders The motorised PGFM3000 Series range of professional faders are available in a variety of configurations and output laws. They are designed to offer a versatile solution for all space envelopes coupled with rapid dynamic response, high accuracy and repeatability. • 65mm 104mm stroke lengths • mono/stereo audio or VCA options • two motor mounting styles • internal track switch options • touch sense path • external microswitch options Stroke length Output law Servo only 00 |Linear g |Log audio taper Stereo log audio taper g |VCA 60 series stroke law Fader type PGFM3 Please enter the codes for the first two options. This will identify the fader data shown opposite Resistance ±20% Mounting threads Switch options Pre-fade listen The switch operates before the active track is reached. This is at the infinity end of the fader and is always under spring load. Spring returns switch to off when knob is released. Note: For external microswitch Pre-fade listen option refer to those dimensions given under Fader start/Auxiliary added to that given under Pre-fade listen. Internal pre-fade listen track switch (2mA max) IO 0 1st internal track switch (2mA max) fader start/auxiliary IS N External microswitch (100mA max) fader start/auxiliary 1 off 0 E External microswitch (100mA max) fader start/auxiliary 2 off 0 ^ External microswitch (100mA max) pre fade listen (see note) M O Only one switch option per column to be selected Track switch Track switch current CONNECTOR USED IS must not exceed 2mA DEPENDENT ON OPTIONS SELECTED

Open the catalog to page 1
PGFM3000 Series - 2

Dimensions and knob bracket options Stroke length A Drive motor data Typical power consumption 1.2W It is important that the fader slider is NOT driven against the end stops. Circuit diagrams/Terminations for Style one Servo track - all fader types 100%V 0%V Fader type mono - M3220 0dB rcdB Connectors IDC Molex series 7720S female. Cable lengths 100 ±10mm. Stroke length A Drive motor data Typical power consumption 1.2W It is important that the fader slider is NOT driven against the end stops. Circuit diagrams/Terminations for Style two Servo track - all fader types Fader type...

Open the catalog to page 2
PGFM3000 Series - 3

Resistance Resistance for stereo faders with 10kQ audio track Linearity - independent Mono Stereo The electrical length of the servo track is longer than the mechanical stroke of the fader so that 0%V and 100%V are never achieved.The maximum and minimum voltages are 99.7mV and 0.25mV respectively. (1V reference) Touch Sense resistance Refer to Penny+Giles for laws other than standard Slider travel Type (mm) Log audio taper Maximum insertion loss 1.0dB. Typical input-related crosstalk 100dB Matching accuracy relative to track one Linear Maximum end Volts 0.1% Test conditions: • wiper load...

Open the catalog to page 3

All CURTISS-WRIGHT catalogs and technical brochures

  1. S-Drive

    2 Pages

  2. AES-350

    18 Pages

  3. AES-349

    25 Pages

  4. SBW

    3 Pages

  5. SCM100

    3 Pages

  6. wm-67

    2 Pages

  7. wm-672

    2 Pages

  8. wm-674

    1 Pages

  9. wm-68a

    2 Pages

  10. wm-762

    2 Pages

  11. wm-763

    2 Pages

  12. wm-764

    2 Pages

  13. WM-777

    2 Pages

  14. WM-782

    3 Pages

  15. WM-783

    3 Pages

  16. WM 784

    2 Pages

  17. wm-80

    2 Pages

  18. WCS-133284

    5 Pages

  19. WM 81

    2 Pages

  20. WCS-134143

    5 Pages

  21. AES-204

    13 Pages

  22. ML1951

    1 Pages

  23. ML1441 AC

    1 Pages

  24. WM526

    2 Pages

  25. JC050

    2 Pages

  26. JC040

    2 Pages

  27. RF15 Series

    2 Pages

  28. RF11 Series

    2 Pages

  29. PGF7000

    1 Pages

  30. On-Highway

    4 Pages

  31. GK1037

    1 Pages

  32. GK0730

    1 Pages

  33. GD1444

    1 Pages

  34. SRH220DR

    2 Pages

  35. STT280

    2 Pages

Archived catalogs