*mydirectindustry

Catalogs
CURTISS-WRIGHT
WM542 Electronic suspended pedal

WM542 Electronic suspended pedal

Product catalog summary

Specifications

Product Life: 3,000,000 full travel cycles.
Electronics: IP67 sealed, EMI resistant (SAE J1113 compliant).
Electrical: Operating voltage of 5V and 12V-24V, with various output signals including Dual APS, Dual PWM, APS, PWM, APS/IVS.
Pedal Angle: 20° nominal.
Mechanical: Static load of 667N, vibration tested for 3 hours across 3 axes up to 4g.
Environmental: Operating and storage temperature range from -40°C to 85°C, humidity tested at 95% RH for 120 hours, sand/dust tested to SAE J1455.
Materials: Main body and treadle cover made of composite plastic, mounting plate made of coated steel.

Product Overview
The Electronic Suspended Pedal WM-542 is designed for commercial and industrial vehicle applications. It features a Hall-effect, non-contact sensor programmable for analog output and/or integrated switches. The unit is customizable with contact or PWM output sensors and offers a nominal 20-degree angular rotation. The throttle control is constructed with a glass-filled nylon body and lever arm, and a coated steel mounting bracket, both of which can be customized to meet customer requirements.

Contact Information

USA: Portland, Oregon. Phone: +1.503.684.8600, Email: [email protected]
Europe: Christchurch, United Kingdom. Phone: +44.1425.271444, Email: [email protected]
Asia: Shanghai, China. Phone: +86.213.3310670, Email: [email protected]

Additional Information
Specifications are subject to change without notice. All trademarks are property of their respective owners.

Catalog excerpts

Electronic Suspended Pedal The Electronic Suspended Pedal WM-542 is designed for commercial and industrial vehicle applications. The unit is equipped with a Hall-effect, non-contact sensor that can be programmed for analog output and/or integrated switches. The electronics are IP67 sealed and highly EMI resistant (SAE J1113). In addition, the unit can be customized with contact or PWM output sensors. The Electronic Suspended Pedal WM-542 is available with a nominal 20 degree angular rotation. The Throttle Control has a glass filled nylon body and lever arm. The mounting bracket is made out of coated steel. Both lever arm and bracket can be customized for customer requirements. SPECIFICATIONS PRODUCT LIFE Full Travel Cycles Electronics IP67 sealed (IEC 60529) SAE J1113 Compliant Operating Voltage Output Signal 5V and 12V-24V Dual APS, Dual PWM, APS, PWM, APS/IVS PEDAL ANGLE Static Load Vibration 667N 3 hour, 3-axis, random broadband up to 4g Operating Temp Range Storage Temp Range Humidity Sand/Dust Main Body Mounting Plate Treadle Cover Composite Plastic Coated Steel Composite Plastic

Open the catalog to page 1

TYPICAL OUTPUT CHARACTERISTICS (other outputs are available) © 2015 Curtiss-Wright. All rights reserved. Specifications are subject to change without notice. All trademarks are property of their respective owners. USA Portland Oregon T: +1.503.684.8600 F: +1.503.684.3879 [email protected] www.cw-industrialgroup.com Christchurch United Kingdom T: +44.1425.271444 F: +44.1425.272655 [email protected] www.cw-industrialgroup.com Shanghai China T: +86.213.3310670 [email protected] www.cw-industrialgroup.com

Open the catalog to page 2

All CURTISS-WRIGHT catalogs and technical brochures

Archived catalogs

ICS100 IN-CYLINDER SENSORS
8 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list