Catalogs >
CURTISS-WRIGHT >
ICS100 IN-CYLINDER SENSORS

ICS100 IN-CYLINDER SENSORS
8Pages

Catalog excerpts

ICS100 IN-CYLINDER SENSORS Innovation In Motion

INNOVATION IN MOTION ICS100 is a range of In-Cylinder linear position sensors designed for integration into hydraulic and pneumatic actuators where the sensor is fitted inside the pressurised environment. Using the proven benefits of Hybrid Track Technology and including a number of unique design features, the ICS100 range is ideally suited to high volume OEM actuator manufacturers, where design engineers can specify an affordable alternative for applications where non-contacting technologies may prove too expensive. Hybrid track The hybrid track comprises a high resistivity conductive...

Open the catalog to page 2

I C S1 0 0 IN-CYLINDER LINEAR POSITION SENSORS Removable contact slider assembly The ICS100 is designed for easy integration into either hydraulic or pneumatic actuators and is supplied with a contact slider ring that can be easily removed from the sensor when installing in the actuator/cylinder rod. The slider ring is color coded for easy identification of the application type - hydraulic (H) option is blue; pneumatic (P) option is black. Mounting hardware is supplied with each sensor to ensure simple, quick installation. World leading availability Total reliability The ICS100 provides a...

Open the catalog to page 3

DIMENSIONS Extended tap position Retracted tap position INTERNAL FLANGE Electrical length E 1.5 ø19.94 19.84 3 core cable 19/0.15 ETFE insulated with PUR sheath 1 or 10m long 11.5 Max. with end support bearing fitted 10 10 Slider ring ø25.00 24.97 ICS100/IN 13.5 32 4.50 4.25 10.97 10.87 4.80 4.60 17 min Mechanical (cylinder) stroke End support bearing, for units over 300mm electrical length. Minimum retracted position. Otherwise customer defined The slider ring can be removed without disturbing the end support bearing. Groove details 30° ø20 0.6 ø21.03 20.88 15° 12.65 Max O/D of bearing...

Open the catalog to page 5

I C S1 0 0 DESIGNERS GUIDE FOR O R D E R I N G A N D I N S TA L L AT I O N The ICS100 sensor is designed for use inside hydraulic or pneumatic actuators and to ensure the correct calculation of the electrical length for ordering purposes, these notes have been developed to assist cylinder designers determine the key dimensions. If you encounter any difficulty with these instructions, please use the contact details on the rear cover to ask for assistance. In most applications, the designer will need answers to the following questions: • What length of sensor do I need to order to match my...

Open the catalog to page 6

Fig 1 INTERNAL FLANGE ICS100/IN Sensor flange c3 13.50 Suggested cylinder rear bulkhead design Extended tap position Retracted tap position Max. with endcap Electrical length E (user defined) 1.50 c1 stop h 11.50 bearing fitted g 10 Mounting hardware is supplied; 1x 20.6mm ID O ring 64-045-207 1x anti-extrusion rig 64-074-003 1x M5 conical set screw 63-096-506 Note: Ensure O ring and anti-extrusion ring are fitted in correct sequence. 33.0 c2 Sensor body b 10.87 Mechanical (cylinder) stroke a Datum Y Datum X General tolerance ±0.25mm d 15°/20° chamfer ø8.0 f 17 min ø25.032 25.006 Minimum...

Open the catalog to page 7

Doc Ref: ICS100 02/12 www.pennyandgiles.com Penny & Giles Position sensors, joysticks and solenoids for commercial and industrial applications. 15 Airfield Road Christchurch Dorset BH23 3TG United Kingdom +44 (0) 1202 409499 +44 (0) 1202 409475 Fax sales@pennyandgiles.com 36 Nine Mile Point Industrial Estate Cwmfelinfach Gwent NP11 7HZ United Kingdom +44 (0) 1495 202000 +44 (0) 1495 202006 Fax sales@pennyandgiles.com 665 North Baldwin Park Boulevard City of Industry, CA 91746 USA +1 626 480 2150 +1 626 369 6318 Fax us.sales@pennyandgiles.com Straussenlettenstr. 7b 85053 Ingolstadt, Germany...

Open the catalog to page 8

ICS100 IN-CYLINDER SENSORS 8Pages

Catalog excerpts

All CURTISS-WRIGHT catalogs and technical brochures

ICS100 IN-CYLINDER SENSORS
8Pages