Catalogs >
CURTISS-WRIGHT >
SLS and MLS Linear Position Sensors

SLS and MLS Linear Position Sensors
1 / 20Pages

Catalog excerpts

SLS & MLS SERIES LINEAR POSITION SENSORS Innovation In Motion

INNOVATION IN MOTION The SLS and MLS series of linear position sensors are designed to provide maximum performance benefits within an extremely compact size. Using the proven benefits of Hybrid Track Technology and including a number of innovative design features, these position sensors are ideally suited to applications where high performance and reliability matched by competitive pricing and rapid despatch are of paramount importance. Hybrid track The hybrid track comprises a high resistivity conductive plastic film bonded to a precision wire-wound element. The conductive plastic film is...

Open the catalog to page 2

L I N E A R POSITION SENSORS High integrity reduces system cost Hybrid track technology sensors used in a control system allow simple, low current electronics to be used, while the low hysteresis, low electrical noise and the self-compensating effect for track wear allow the system designer to achieve improved system accuracy and long term integrity without increasing system costs. The technology also enables quick, easy installation. Availability Total reliability The SLS and MLS series of linear position sensors are designed to provide the user with the widest choice of options to suit a...

Open the catalog to page 3

SELF ALIGNING BEARING MOUNTING DIMENSIONS AND MOUNTING OPTIONS D fully retracted ±1 adjustment Note: drawings not to scale 19.0 + 1.0 ø9.5 E + 0.5 - 0.0 Rod end bearing ø2/2.15 mounting hole both ends 3 core cable 7/0.125 3 4 ø9 ø9.5 1 min M + 1.0 - 0.0 12° 12° angle of misalignment 1 min PLAIN BODY MOUNTING ø4.6 ø9.5 M2 x 0.4 thread x 10 long B 1 MOUNTING OPTIONS 2 clamps in this kit 3 holes 2.10 dia equi-spaced on a 16.75 PCD 9.5 6,5 15.5 20 3 3 M2 SKT cap 12 1.5 10 12 8 2 Body clamp Flange mounting SA200841 SA200842 Electrical stroke E mm 10 20 30 40 50 75 100 Mechanical stroke M mm 12.5...

Open the catalog to page 5

M L S 1 3 0 LINEAR DISPLACEMENT SENSOR The MLS130 sealed linear sensor is designed to provide superior performance within a compact, lightweight package in stroke lengths from 25 to 200mm. With a choice of mounting options, including metal rod end bearings, and an optional protective sleeve for extreme environmental conditions, this sensor is ideally suited to motorsport data acquisition applications on suspension and throttle position feedback, where high performance and reliability with competitive pricing and rapid despatch are vital. The sensor is supplied fully sealed to IP66, with an...

Open the catalog to page 8

SLS and MLS Linear Position Sensors - 13

7.60 ø12.70 ø22 ø15.80/ 15.70 4 22.20 ø38.10 ø30 A Thread M4 x 0.7 (22.00/18.00 long) DIMENSIONS Note: drawings not to scale C B Electrical stroke E mm 10 Mechanical stroke M mm 12.5 22.5 Body length A mm 44.4 54.4 Shaft extended - B mm 43 53 Shaft extended - C mm 20 30 g 45 2 holes ø4.2 50 Weight approximate 20 Note: Nominal shaft position is fully extended (spring loaded) MATERIALS Body Nylatron® MC901 (blue) Shaft Stainless steel ELECTRICAL CONNECTIONS 3 core cable: PUR sheathed 0.3m long Red E electrical stroke Black with PTFE insulated 7/0.125 cores. Direction of shaft extension...

Open the catalog to page 13

SLS and MLS Linear Position Sensors - 17

IN-CYLINDER LINEAR POSITION SENSORS ICS100 In-Cylinder Sensors Suitable for actuator strokes up to 1600mm A range of In-Cylinder linear position sensors designed for integration into hydraulic and pneumatic actuators where the sensor is fitted inside the pressurised environment. Using the proven benefits of Hybrid Track Technology and including a number of innovative design features, the ICS100 range is ideally suited to high volume OEM actuator manufacturers, where design engineers can specify an affordable alternative for applications where non-contacting technologies may prove too...

Open the catalog to page 17

SLS and MLS Linear Position Sensors - 18

SPRING RETURN LINEAR DISPLACEMENT SENSOR HLP190 Linear Potentiometers The HLP190 range of hybrid linear potentiometers provides the facility for single or dual electrical output with a body diameter of only 19mm. Stroke lengths are from 25mm to 150mm, with a choice of body clamp (BS) or flange (FS) mounting. This model is supplied with a spring loaded shaft, biased to the fully extended position. Suited to a wide range of industrial applications for medium stroke length requirements – especially structural monitoring data acquisition. PERFORMANCE Electrical stroke E mm 25 50 75 100 125 150...

Open the catalog to page 18

SLS and MLS Linear Position Sensors - 20

Doc Ref: SLS & MLS 01/12 www.pennyandgiles.com Penny & Giles Position sensors, joysticks and solenoids for commercial and industrial applications. 15 Airfield Road Christchurch Dorset BH23 3TG United Kingdom +44 (0) 1202 409409 +44 (0) 1202 409475 Fax sales@pennyandgiles.com 36 Nine Mile Point Industrial Estate Cwmfelinfach Gwent NP11 7HZ United Kingdom +44 (0) 1495 202000 +44 (0) 1495 202006 Fax sales@pennyandgiles.com 665 North Baldwin Park Boulevard City of Industry, CA 91746 USA +1 626 480 2150 +1 626 369 6318 Fax us.sales@pennyandgiles.com Straussenlettenstr. 7b 85053 Ingolstadt,...

Open the catalog to page 20