Penny & Giles Multi-Function Grip HI Grip • Ergonomic design with left- and right-hand options • Front panel combinations including three rollers or up to eight switches • Rear panel combinations of one roller or up to two switches • Multi-color options for rollers and switches • 16 logo options for switches • Available pre-fitted to JC6000 or JC8000, or as a stand-alone grip • Robust design for arduous applications The HI Grip, which is available as a left- or right-hand option, offers a wide range of proportional, noncontacting roller and high-life, push-button switch combinations. Whereas most competitive products can support just three roller functions, the HI Grip can accommodate up to four. A contoured front panel means the rollers are within an easy sweep of an operator’s thumb, while the switch arrays are angled to allow for similarly convenient actuation. The controls on the rear panel are situated to provide comfortable operation with a first finger. To further enhance operator comfort, both handed options are oriented to lean forward and inwards. For maximum, application-specific flexibility, each roller and switch is offered in nine color options. Further customization is possible by a choice of 16 logos which can be printed in each of the switches. In addition to being supplied fitted to a JC6000 or JC8000 joystick, the HI Grip can be supplied as a stand-alone product with an industry-standard, threaded mount and flying leads. Careful material selection ensures maximum robustness to impact, liquids and dust, with the enclosure being sealed to IP67. An EMC performance level of 150V/m is provided and the overall design achieves an MTTFd in excess of 900 years. Industrial Group

5Vdc ± 0.5Vdc for the rollers 10% to 90% of Supply Voltage 50% ±5.5% of Supply Voltage 10mA max. per roller 24V, 50mA maximum per switch Flying lead 600N - applied at the center of the grip 10 Joules 40Nm 290g nominal ±35° for front rollers; ±25° for rear roller 5 million cycles Normally-open - momentary 1mm 3.5N nominal > 5 million cycles > 900 years ROLLER & SWITCH COMBINATIONS FRONT PANEL REAR PANEL Roller(s) Switches Roller(s) Switches ELECTRICAL SUPPLY VOLTAGE ROLLER OUTPUT VOLTAGE (FACTORY SET) ROLLER CENTERING ACCURACY ROLLER CURRENT CONSUMPTION SWITCH GRIP CONNECTION MECHANICAL MAXIMUM...