Catalog excerpts
Penny & Giles Sealed Tilt Sensor STT280 • No moving parts - MEMS technology • Compact 28mm diameter body • Unlimited mechanical life • Absolute measurement • Measurement range ±10-60° • High resolution ±0.07° • Analog output - 0.5-4.5V • 5V or 8-30V supply • Over-voltage protection • Reverse polarity protection • Low power consumption • Sealing to IP68 • Crush-proof mounting flange The STT280 is a tilt sensor that is sealed in a compact, 28mm diameter body, which has been designed to provide reliable, fit-and-forget tilt measurement sensing for even the most arduous of operating environments. Solid-state 3D-MEMS (Micro-Electro-Mechanical-Systems) technology is used to measure the sensor’s inclination relative to the gravity of the earth. As there are no moving or contacting parts, this sensing method provides distinct advantages in terms of reliability, stability and compactness over fluid based, electrolytic and pendulum operated devices. Four measurement ranges - ±10°, ±20°, ±30° and ±40° - with resolution of ±0.07° are available, and each provides a 0.5-4.5V output analog signal across the angular span, with a nominal 2.5V signal at 0° tilt. A choice of power supply options - 5V and 8-30V - is also offered meaning the sensor can be used in conjunction with a regulated supply or connected directly to an unregulated source, such as a battery. Reverse polarity and over-voltage protection is included, while the current consumption is less than 6.5mA. The sensor body is manufactured from high strength, corrosion resistant material and has a protection rating of IP68. A wide operating temperature range and EMC immunity of 100V/m mean the STT280 is ready for use in the harshest of environments. Typical applications include: road construction equipment, cranes and booms, scissor lifts, agricultural vehicles, container handling and hydraulic lift systems.
Open the catalog to page 1ELECTRICAL SUPPLY VOLTAGE SUPPLY CURRENT OVER VOLTAGE REVERSE POLARITY PROTECTED POWER-ON TIME MEASUREMENT RANGE OUTPUT VOLTAGE (5V SUPPLY) OUTPUT VOLTAGE (8-30V SUPPLY) RESOLUTION OUTPUT NOISE ZERO TEMP. COEFFICIENT (0 = 0) SENSITIVITY TEMP. COEFFICIENT FREQUENCY RESPONSE SETTLING TIME HYSTERESIS & REPEATABILITY CROSS-AXIS SENSITIVITY! LOAD RESISTANCE SHORT CIRCUIT PROTECTION MECHANICAL WEIGHT MOUNTING PHASING ENVIRONMENTAL PROTECTION CLASS OPERATIONAL TEMPERATURE STORAGE TEMPERATURE VIBRATION SHOCK EMC IMMUNITY LEVEL 5Vdc ± 0.25Vdc (regulated) or 8-30Vdc (unregulated) < 6.5mA Up to...
Open the catalog to page 2All CURTISS-WRIGHT catalogs and technical brochures
-
S-Drive
2 Pages
-
AES-350
18 Pages
-
AES-349
25 Pages
-
Industrial Division
8 Pages
-
Transmission Shifter
2 Pages
-
SBW
3 Pages
-
newVSI Brochure
2 Pages
-
Multi-Function Grip
2 Pages
-
SCM100
3 Pages
-
wm-67
2 Pages
-
wm-672
2 Pages
-
wm-674
1 Pages
-
wm-68a
2 Pages
-
wm-762
2 Pages
-
wm-763
2 Pages
-
wm-764
2 Pages
-
WM-777
2 Pages
-
WM-782
3 Pages
-
WM-783
3 Pages
-
WM 784
2 Pages
-
wm-80
2 Pages
-
WCS-133284
5 Pages
-
WM 81
2 Pages
-
WCS-134143
5 Pages
-
Tilt Position Sensor
4 Pages
-
Industrial Group
4 Pages
-
Sealed Tilt Sensor STT500
2 Pages
-
Aerial Work Platforms
4 Pages
-
AES-204
13 Pages
-
ML1951
1 Pages
-
ML1441 AC
1 Pages
-
Diagnostic Test Tool
2 Pages
-
WM526
2 Pages
-
CW-IG-Overview Brochure
8 Pages
-
JC050
2 Pages
-
JC040
2 Pages
-
WM547 Rotary hand control
2 Pages
-
WM535 Lever hand control
2 Pages
-
C7 Hydraulic Lever
2 Pages
-
C6 Hydraulic Lever
2 Pages
-
RF15 Series
2 Pages
-
RF11 Series
2 Pages
-
PGFM3000 Series
3 Pages
-
PGF8000 Series
4 Pages
-
PGF7000
1 Pages
-
PGF3000 Series
4 Pages
-
CW-IG-Overview
8 Pages
-
CW-IG-On-Highway
4 Pages
-
CW-IG-Medical Mobility
4 Pages
-
CW-IG-Industrial
4 Pages
-
CW-IG-Construction
4 Pages
-
PGFX3000 Series
2 Pages
-
PGFM8000 SERIES
4 Pages
-
On-Highway
4 Pages
-
GK1037
1 Pages
-
GK0730
1 Pages
-
Permanent Magnet
1 Pages
-
GD1444
1 Pages
-
D-Frame Solenoid
1 Pages
-
CW-IG-Agriculture
4 Pages
-
SRH220DR
2 Pages
-
STT280
2 Pages
-
CW-IG-Material Handling
4 Pages
-
C3-CE AC Motor Controller
2 Pages
-
C3-36V - AC Motor Controller
2 Pages
-
WM531 Remote sensor control
2 Pages
-
WM526 Electronic floor pedal
2 Pages
-
WM537 Electronic floor pedal
2 Pages
-
WM558 Electronic floor pedal
2 Pages
-
SRS Sealed Rotary Sensors
8 Pages
-
STT series Sealed Tilt Sensors
12 Pages
-
Holding Magnets
2 Pages
-
Digital Panel Indicators
8 Pages
Archived catalogs
-
ICS100 IN-CYLINDER SENSORS
8 Pages