Penny & Giles Sealed Tilt Sensor STT500 • No moving parts • High resolution ±0.07° • Absolute measurement • Measuring ranges ±10°, ±20°, ±30° and ±60° • Less than 6.5mA supply current • Marine-grade, cast-aluminum housing with 88mm dia. flange • Rugged construction, sealed to IP69K • Choice of cable outputs The STT series of sealed tilt sensors have been designed to provide reliable, fit-and-forget tilt measurement sensing for the most arduous operating environments. The STT500 is supplied in a rugged, marine grade cast aluminium housing. The STT series use solid state 3D-MEMS (Micro-ElectroMechanical Systems) technology to measure the sensor’s inclination relative to earth’s gravity. They have a measurement range from ±10° to ±60° and provide a 0.5 to 4.5Vdc output signal over these angular ranges, with a nominal 2.5Vdc at 0° tilt. By using this technology, the STT series provide distinct advantages in reliability, stability and compactness over fluid based, electrolytic and pendulum operated sensors. Highly robust, maintenance-free and easy to fit, the STT series sealed tilt sensors represent cost-effective solutions for demanding tilt measurement applications. These tilt sensors are suitable for use in applications such as road construction equipment, cranes and booms, scissor lifts, agricultural vehicles, container handling and hydraulic lift systems.

ELECTRICAL SUPPLY VOLTAGE SUPPLY CURRENT OVER VOLTAGE REVERSE POLARITY PROTECTED POWER-ON TIME MEASUREMENT RANGE OUTPUT VOLTAGE (5V SUPPLY) OUTPUT VOLTAGE (8-30V SUPPLY) RESOLUTION OUTPUT NOISE ZERO TEMP. COEFFICIENT (0 = 0) SENSITIVITY TEMP. COEFFICIENT FREQUENCY RESPONSE SETTLING TIME HYSTERESIS & REPEATABILITY CROSS-AXIS SENSITIVITY! LOAD RESISTANCE SHORT CIRCUIT PROTECTION MECHANICAL WEIGHT MOUNTING PHASING ENVIRONMENTAL PROTECTION CLASS OPERATIONAL TEMPERATURE STORAGE TEMPERATURE VIBRATION SHOCK EMC IMMUNITY LEVEL 5Vdc ± 0.25Vdc (regulated) or 8-30Vdc (unregulated) < 6.5mA Up to 40Vdc Yes <...