Electronic Floor Pedal The Electronic Floor Pedal WM-558 is designed for all commercial vehicle applications. The unit is equipped with a Hall Effect non-contact sensor that can be programmed for analog output and/or integrated switches. The electronics are IP68 and 69k sealed and highly EMI resistant (SAE J1113). In addition, the unit can be customized with contact or PWM output sensors. The Electronic Floor Pedal WM-558 is available with a standard treadle angle of 35 or 45 degrees. The Throttle Control is made out of high strength engineered plastics. The base plate has five mounting holes for various mounting options. SPECIFICATIONS PRODUCT LIFE Full Travel Cycles Electronics IP68 and 69k sealed (IEC 60529) SAE J1113 Compliant Output Signal Dual APS, APS/IVS, APS/IVS/IVS, Dual PWM ELECTRICAL PEDAL ANGLE MECHANICAL Operating force (at 150mm from pivot point) Static Load Vibration Idle = 17N, Full Travel = 45N 1500N@ 150mm Random broadband up to 4g (3-axis, 3 hr. each axis,) Operating Temp Range Storage Temp Range Humidity Sand/Dust Base plate Foot treadle Diecast Aluminum or Composite Plastic Composite Plastic

TYPICAL OUTPUT CHARACTERISTICS (Other outputs are available) © 2015 Curtiss-Wright. All rights reserved. Specifications are subject to change without notice. All trademarks are property of their respective owners. USA Portland Oregon T: +1.503.684.8600 F: +1.503.684.3879 [email protected] www.cw-industrial.com Christchurch United Kingdom T: +44.1425.271444 F: +44.1425.272655 [email protected] www.cw-industrial.com Shanghai China T: +86.213.3310670 [email protected] www.cw-industrial.com