
Penny & Giles Proportional, Hall-Effect Rocker JC040 • Robust design for arduous in-cab applications • Return-to-center • Optional mechanical over-press feature at either ends of travel • Low under-panel depth of 21 mm • Hall-effect sensor technology • Rated for 1 million cycles of life • Dual-redundant electronic architecture • Outputs with sense and voltage span options • Dual supply to ensure a high level of signal integrity • Designed to allow contamination (liquid or dust) to pass through the mechanism without causing any damage • Electronics sealed to IP67 The JC040 is a proportional rocker for use in joystick grips and other in-cab human-machine interfaces. Two robust, return-to-center operating options are available: a ±25° movement from center; or a ±20° movement with an over-press feature, which can be included in both directions of movement or just one, used to indicate a different mode of machine operation. In all versions, a compact mechanical design means the required underpanel space is just 21mm. The rocker utilizes non-contacting, Hall-effect sensing technology that eliminates contact wear and provides for long-life integrity of the output signal, giving rise to a minimum operating life of 1 million cycles. Safety is enhanced via a fully dual-redundant electronic architecture made up of two power supplies and two sensing circuits, the outputs of which can be set to positive or negative ramps or a combination of both. Electronic robustness is assured with the enclosure sealing rated to IP67. Industrial Group
Open the catalog to page 1The rocker has a design where contamination (liquid or dust) can pass through the mechanism without causing any damage and an IP67 protection of the electronics EN 61000-4-3: 2002 100V/m, 80MHz-1 GHz and 1.4-2.7GHz ELECTRICAL SUPPLY VOLTAGE OUTPUT VOLTAGE CENTER REFERENCE OUTPUT SENSE CURRENT CONSUMPTION CONNECTION MECHANICAL BREAKOUT FORCE OPERATING FORCE AT END OF TRAVEL - WITHOUT OVER-PRESS OPERATING FORCE AT START OF OVER-PRESS OPERATING FORCE TO ENGAGE OVER-PRESS MECHANICAL ANGLE START OF OVER-PRESS MECHANICAL LIFE WEIGHT ENVIRONMENTAL & LEGISLATIVE OPERATING TEMPERATURE STORAGE TEMPERATURE ENVIRONMENTAL...
Open the catalog to page 22 Pages
18 Pages
25 Pages
8 Pages
2 Pages
3 Pages
2 Pages
2 Pages
3 Pages
2 Pages
2 Pages
1 Page
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages
3 Pages
3 Pages
2 Pages
2 Pages
5 Pages
2 Pages
5 Pages
4 Pages
4 Pages
2 Pages
2 Pages
4 Pages
13 Pages
1 Page
1 Page
2 Pages
2 Pages
8 Pages
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages
3 Pages
4 Pages
1 Page
4 Pages
8 Pages
4 Pages
4 Pages
4 Pages
4 Pages
2 Pages
4 Pages
4 Pages
1 Page
1 Page
1 Page
1 Page
1 Page
4 Pages
2 Pages
2 Pages
4 Pages
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages
8 Pages
12 Pages
2 Pages
8 Pages
8 Pages