No Contact Rotary Position Sensor  No Contact – Hall-effect technology  Measurement angle 20-360°  5V or 9-30V supply  Dual redundant outputs  Analog output – 0.5-4.5V, 0.2-4.8V or 0-10V  Fail-safe outputs  PWM output  Sealing to IP68  AMP or Deutsch connector options  Crush-proof mounting flange  Optional lever drive arm The SRH220DR is a shaft-operated, No Contact rotary position sensor with dual-redundant outputs. The versatile, factory-programmable electronics, which can be supplied from 5V or 9-30V, can be easily set to one of three analog voltage output ranges or one of three PWM frequencies. In addition, the polarities of the analog outputs can be set to one of three combinations – both tracking in the same direction or one opposite to the other. The electrical output span can be set to correspond to rotations of 20° to 360° and the sensor contains two independent measuring circuits, each with its own power connections, meaning safety critical applications can be addressed. Furthermore, on-board diagnostic functions mean that the outputs can be put into safe, pre-defined states should an internal error be detected. A fully sealed design offers exceptional levels of performance with respect to water and dust, shock, vibration and temperature, meaning the sensor is ideal for use in hostile, on- and off-highway vehicle environments. Connection options are industry-standard AMP Superseal or Deutsch DT04 series connectors, which are integrated into the sensor body meaning customer wiring harnesses can be directly connected. As an option, a drive lever with 30, 40 and 50mm moment positions can be supplied. Custom output options available on request include: non-linear laws, switch outputs, clamp voltage, reduced input/output delay and output mapping to replicate poten

SPECIFICATIONS SUPPLY SUPPLY VOLTAGE SUPPLY CURRENT OVER VOLTAGE REVERSE POLARITY PROTECTED POWER-ON TIME CONNECTIONS OUTPUT 5Vdc ± 0.5Vdc or 9-30Vdc (13.5-30V for 0-10V output) < 25mA (<30mA for 0-10V output) Up to 40Vdc (-40 to 60°C) Yes < 1s AMP Superseal or Deutsch DT04 MEASUREMENT RANGE OUTPUT DIRECTION OUTPUT VOLTAGE (0.5-4.5V) MONOTONIC RANGE (0.5-4.5V) OUTPUT VOLTAGE (0.2-4.8V) MONOTONIC RANGE (0.5-4.5V) OUTPUT VOLTAGE (0-10V) OUTPUT NOISE INPUT/OUTPUT DELAY PWM FREQUENCY PWM LEVEL PWM DUTY CYCLE MONOTONIC RANGE (PWM) PWM RISE/FALL TIME RESOLUTION LINEARITY TEMPERATURE COEFFICIENT LOAD...