Electronic Floor Pedal The Electronic Floor Pedal WM-526 is designed for all commercial vehicle applications and is highly customizable. The Electronic Floor Pedal WM-526 is available in kick down and non-kick down versions. The unit is equipped with a Hall-effect, non-contact sensor that can be programmed for analog output and/or integrated switches. The electronics are IP67 sealed and highly EMI resistant (SAE J1113). If necessary, the unit can also be customized with contact or PWM output sensors. The Electronic Throttle Control provides a robust design with a corrosion resistant cast aluminum treadle and a coated steel base plate. The pedal is available in three treadle angles: 28.5, 35, and 45 degrees. The treadle is supplied with a rubber cover for improved foot traction. SPECIFICATIONS PRODUCT LIFE Full Travel Cycles Electronics IP67 sealed (IEC 60529) SAE J1113 Compliant Operating Voltage Output Signal 5V and 12V-24V Dual APS, Dual PWM, APS, PWM, APS/IVS PEDAL ANGLE Static Load Vibration 1500N 3 hour, 3-axis, random broadband up to 4g Operating Temp Range Storage Temp Range Humidity Sand/Dust Main Body Mounting Plate Treadle cover Cast Aluminum Coated Steel NBR Rubber

TYPICAL OUTPUT CHARACTERISTICS (other outputs are available) © 2015 Curtiss-Wright. All rights reserved. Specifications are subject to change without notice. All trademarks are property of their respective owners. USA Portland Oregon T: +1.503.684.8600 F: +1.503.684.3879 [email protected] www.cw-industrialgroup.com Christchurch United Kingdom T: +44.1425.271444 F: +44.1425.272655 [email protected] www.cw-industrialgroup.com Shanghai China T: +86.213.3310670 [email protected] www.cw-industrialgroup.com