Penny + Giles PGF3000 Series faders offer the ultimate in performance having been designed for demanding professional applications. They incorporate conductive plastic tracks, precious metal contacts, environmental shielding, and are available in a choice of stroke lengths from 45mm to 104mm. multiple stroke lengths • compact size • track switches • microswitches single or dual channels linear, audio log or VCA outputs

Fader type Please enter the codes for your first three options. This will identify the fader data shown opposite. Safety warning VCA2k7^ 4-40 UNC 50Vdc maximum voltage The PGF3000 is designed for operation at voltages not exceeding 50Vdc SWITCH OPTIONS Pre-fade listen The switch operates before the active track is reached. This is at the infinity end of the fader and is always under spring load. Spring returns switch to off when knob is released. Fader start/Auxiliary The switch operates within 4mm from the mechanical stop at the infinity end of the fader and can be microswitch or track switch based....

OUTPUT LAW CHARACTERISTICS Log audio taper Maximum insertion loss 1.0dB. Typical input related crosstalk 100dB Refer to Penny+Giles for laws other than standard. Matching accuracy for stereo option (relative to track 1) – ±3.0dB (0-20) Matching accuracy (relative to track 1) Note: The ratio of fader resistance to wiper load should be 100:1 or higher. Test conditions: • wiper load 100kΩ log only • element resistance 10kΩ • frequency for cut-off 15kHz • frequency for law accuracy 1kHz • insulation resistance 20MΩ at 50Vdc PANEL GRADUATIONS/SLOTS Fader type 3220/22--104mm stroke Fader type 3220/22...

www.pennyandgiles.com Penny & Giles Faders and controllers, position sensors, joysticks and solenoids for commercial and industrial applications. Quality Approvals Penny + Giles are accredited to BS EN ISO 9001:2008 Quality is at the heart of all our systems ensuring the reliability of our products from initial design to final despatch. EMC Directive 2004/108/EEC The products detailed in this document are supplied as components for installation into an electrical apparatus or system. They are outside the scope of the EEC directive and will not be CE marked. The information contained in this brochure...