• 100mm stroke • motorised operation • internal track switch Combining innovative design with carefully selected materials, the PGFM8000 series fader provides the features and reliability that you expect from a Penny+Giles product. Conductive plastic tracks, precious metal contacts and twin guide rods ensure smooth operation whilst maintaining excellent long term electrical and mechanical performance. • single channel • linear, audio log or VCA output PGFM8000 SERIES LINEAR MOTORISED FADERS

Pt aG aF dM o t o0i s0d0f a d e r 8r e s nd r m SELECT THE FADER OPTIONS YOU REQUIRE Stroke length Output channels Fader type Please enter the code for your output law option. This will indentify the fader data shown opposite. Resistance ±20% Mounting threads Motor type Safety warning For servo track resistance refer to details opposite 50Vdc maximum voltage The PGFM8000 is designed for operation at voltages not exceeding 50Vdc SWITCH OPTIONS Pre-fade listen (PFL) The switch operates before the active track is reached. This is at the infinity end of the fader and is always under spring load....

Log audio taper Maximum insertion loss 0.5dB. Typical input related crosstalk 85dB Linear Maximum end volts 1.0% Type Accuracy Note: The ratio of fader resistance to wiper load should be 100:1 or higher Servo track The servo track is nominally 2mm longer than the mechanical stroke. The nominal end voltages are 990mV and 10mV (1V reference) and only in extremes of tolerance are the end voltages achieved, thus allowing servo control over the full mechanical stroke. Standard resistance for faders having no additional tracks (servo & touch sense only) ±20% 10k^ Standard resistance for faders having a 5k...

Penny & Giles Faders and controllers, position sensors, joysticks and solenoids for commercial and industrial applications. Quality Approvals Penny + Giles are accredited to BS EN ISO 9001:2008 Quality is at the heart of all our systems ensuring the reliability of our products from initial design to final despatch. EMC Directive 2004/108/EEC The products detailed in this document are supplied as components for installation into an electrical apparatus or system. They are outside the scope of the EEC directive and will not be CE marked. The information contained in this brochure on product applications...