JC150 Single Axis Joystick Controller
1 / 16Pages

Catalog excerpts

JC150 Single Axis Joystick Controller - 1

JC150 SINGLE AXIS JOYSTICK CONTROLLER Innovation In Motion

Open the catalog to page 1
JC150 Single Axis Joystick Controller - 2

INNOVATION IN MOTION The JC150 single-axis joystick controller is designed for demanding operator control applications in off-highway vehicles and other man-machine interfaces, where lever strength, signal reliability, and handle functionality are important. The joystick is supplied with a long life conductive plastic potentiometer track and directional/center off or end switches to provide signals for sensing lever direction and fault detection. The JC150’s compact size, high lever strength and superb proportional control are ideal for applications which include operator controls on a wide...

Open the catalog to page 2
JC150 Single Axis Joystick Controller - 3

JOYSTICK CONTROLLER Total reliability The JC150 includes lever mechanics designed to give smooth proportional control, and has been designed to withstand a load on the handle up to 300N, measured 135mm above the panel. Conductive plastic potentiometer tracks featuring multi-fingered precious metal wipers give low electrical noise and a working life greater than 2 million operations with zero maintenance during this period. Safety Designed to interface with an electronic controller, the long-life potentiometer track generates analog outputs with switched reference signals that are...

Open the catalog to page 3
JC150 Single Axis Joystick Controller - 4

PERFORMANCE MECHANICAL Lever action Lever breakout force* Lever operating force** Maximum allowable force* Lever operating angle Expected life (operations) Weight Self centering (standard) or friction lock (FL option) 4.9 to 10.7 (standard) 13 to 17 to overcome detent - FL option 16.8 to 21.5 (Standard - full lever deflection) 8 to 12 when out of detent - FL option 300 ±34 Greater than 2 million (0.5 million for Friction Lock (FL) action or handle options CL and EL) 560 without handle fitted Measured at 75mm above upper flange face (80mm for FL option) ** Measured at 135mm above upper...

Open the catalog to page 4
JC150 Single Axis Joystick Controller - 5

Note: drawings not to scale 82.5 INSTALLATION The joystick is designed to be fitted from 44mm diameter hole. The effectiveness 2 x 2 holes 13.0mm deep to suit M5 threadform screws. Holes to suit M5 Choose one screw hole each side of centre. of the joystick flange sealing is dependent on the panel mounting surface being sufficiently rigid to compress the sealing 34º gaiter. The surface finish of the mounting Black eggshell epoxy finish on all surfaces. Panel mounting details panel is critical to achieving an adequate seal and rough surface finishes, paint chips, deep scratches, etc. should...

Open the catalog to page 5
JC150 Single Axis Joystick Controller - 6

PERFORMANCE OPTIONS axes| | TRACKS LEVER SPRING FORCE HANDLE/GRIP STYLE See pages 7-15 INTERFACE SPECIAL OPTIONS JOYSTICK CONTROLLER HOW TO SPECIFY FEATURE CODE Single Y Analog potentiometer - 5k, 0-100%, ±7.5° directional switch E Analog potentiometer - 10k, 0-100%, ±7.5° directional switch L Analog potentiometer - 1.6k, 0-100%, ±7.5° directional switch N Analog potentiometer - 2.9k, 25-75%, ±5° directional switch Q Analog potentiometer - 2k, 10-90%, ±5° directional switch R Analog potentiometer - 2k, 10-90%, ±7.5° directional switch S Analog...

Open the catalog to page 6
JC150 Single Axis Joystick Controller - 7

JOYSTICK CONTROLLER HANDLE OPTIONS The HKN handle is the simplest option available for the JC150. This handle does not include any additional functionality, but is designed to allow the JC150 joystick to be controlled by the operator gripping the handle, palm downwards. Developed to improve the integrity of your control system, the Center Lock (CL) and End Lock (EL) handles provide a mechanical safety lock – eliminating unwanted movement of the lever. They mechanically hold the shaft of the JC150 in its safe central position or at either end of the JC150’s range of travel. Lifting the...

Open the catalog to page 7
JC150 Single Axis Joystick Controller - 8

HKN HANDLE OPTION DIMENSIONS ø35 SPECIFICATION Handle material Gloss finish duroplast Handle retention force CL/EL HANDLE OPTION DIMENSIONS SPECIFICATION Handle material Neoprene rubber

Open the catalog to page 8
JC150 Single Axis Joystick Controller - 9

HB HANDLE OPTIONS NO LONGER AVAILABLE PAGE LEFT INTENTIONALLY BLANK

Open the catalog to page 9
JC150 Single Axis Joystick Controller - 10

SPECIFICATION Maximum height above flange mm Maximum grip diameter mm Environmental sealing (IEC 60529) Number of switches Action Switch operating force Trigger N Maximum current @ 30Vdc mA Expected life (operations) Operating temperature °C Storage temperature °C

Open the catalog to page 10
JC150 Single Axis Joystick Controller - 11

Trigger switch No No No Yes Yes Yes No No Yes Yes No Yes Hand rest No No No No Yes Yes Yes Yes No Yes Yes No See electrical connections for wire color codes. ELECTRICAL Pin number CONNECTIONS Common terminal (for top switches) 16 Switch 1 6 Wire color Black Blue Green Blue/Orange Yellow

Open the catalog to page 11
JC150 Single Axis Joystick Controller - 12

SPECIFICATION Maximum height above flange mm Maximum grip diameter mm Environmental sealing (IEC 60529) Number of switches Action Switch operating force N Maximum current @ 50Vdc mA Expected life (operations) Weight g Operating temperature °C Storage temperature °C ROCKER Rocker profile Breakout force N Operating force N Mechanical movement ° Electrical movement ° Expected life (operations) Load current (maximum) mA Power dissipation @ 25°C W Track resistance Output voltage Center tap angle ° Directional or center off switch Switch gap ° Switch supply...

Open the catalog to page 12
JC150 Single Axis Joystick Controller - 13

Standard rocker profile Optional V - rocker profile ELECTRICAL CONNECTIONS Wire color Black Blue Yellow Blue/White White/Green Red Violet Pink with marker Red/Green Black/White White/Red Person present switch t Person present switch t Rocker positive supply (L, R or H) 2 Rocker zero or negative supply (L, R or H) 15 Rocker output signal (L or H) 7 Rocker output signal (R) 7 Rocker switch common 16 Rocker switch (L forward) 4 Rocker switch (L backward) 3 Rocker switch (R forward) 5 Rocker switch (R backward) 6 Rocker switch (H left) 6 Rocker switch...

Open the catalog to page 13
JC150 Single Axis Joystick Controller - 14

SPECIFICATION Maximum height above flange mm Maximum grip diameter mm Environmental sealing (IEC 60529) Number of switches Action Switch operating force Switch 1, 2, 3 & 4 N Trigger N Maximum current @ 30Vdc mA Maximum current @ 28Vdc A Expected life (operations) Operating temperature Storage temperature 190 40.5 IP66 0 to 5 Momentary Rocker or Trigger 5 at 11mm radius (Rocker switches) 3 at center line of Trigger switch 100 (Rocker switches) 5 resistive (Trigger switch - two wires connected) 1 million at full power (Rocker switches) 500,000 @ 1A resistive (Trigger...

Open the catalog to page 14

All CURTISS-WRIGHT catalogs and technical brochures

  1. S-Drive

    2 Pages

  2. AES-350

    18 Pages

  3. AES-349

    25 Pages

  4. SBW

    3 Pages

  5. SCM100

    3 Pages

  6. wm-67

    2 Pages

  7. wm-672

    2 Pages

  8. wm-674

    1 Pages

  9. wm-68a

    2 Pages

  10. wm-762

    2 Pages

  11. wm-763

    2 Pages

  12. wm-764

    2 Pages

  13. WM-777

    2 Pages

  14. WM-782

    3 Pages

  15. WM-783

    3 Pages

  16. WM 784

    2 Pages

  17. wm-80

    2 Pages

  18. WCS-133284

    5 Pages

  19. WM 81

    2 Pages

  20. WCS-134143

    5 Pages

  21. AES-204

    13 Pages

  22. ML1951

    1 Pages

  23. ML1441 AC

    1 Pages

  24. WM526

    2 Pages

  25. JC050

    2 Pages

  26. JC040

    2 Pages

  27. RF15 Series

    2 Pages

  28. RF11 Series

    2 Pages

  29. PGF7000

    1 Pages

  30. On-Highway

    4 Pages

  31. GK1037

    1 Pages

  32. GK0730

    1 Pages

  33. GD1444

    1 Pages

  34. SRH220DR

    2 Pages

  35. STT280

    2 Pages

Archived catalogs