Electronic Suspended Pedal The WM-546 Electronic Suspended Pedal is designed for all commercial vehicle applications, where compact design and a cost-effective solution are essential. The all-plastic housing has a three-hole bolt pattern for mounting to the vehicle firewall and the foot pad is molded as an integral part of the pedal lever arm. The unit is equipped with a Hall-effect, noncontact sensor that can be programmed for analog output and/or integrated switches. The electronics are IP67 sealed and highly EMI resistant (SAE J1113). In addition, the unit can be offered with contact or PWM output sensors. SPECIFICATIONS PRODUCT LIFE Full Travel Cycles Electronics IP67 sealed (IEC 60529) SAE J1113 Compliant Output Signal Dual APS, APS/IVS, APS/IVS/IVS, Dual PWM PEDAL ANGLE Degrees Operating force 19 ± 2° Angular Rotation Neutral = 25N, Full Travel = 37N Static Load Vibration 1500N 3 hour, 3-axis, random broadband up to 4g Operating Temp Range Storage Temp Range Humidity Sand/Dust Foot treadle Body castings Glass Filled Nylon 66 Glass Filled Nylon 66 ELECTRONICS ELECTRICAL

TYPICAL OUTPUT CHARACTERISTICS (Other outputs are available) © 2015 Curtiss-Wright. All rights reserved. Specifications are subject to change without notice. All trademarks are property of their respective owners. USA Portland Oregon T: +1.503.684.8600 F: +1.503.684.3879 [email protected] www.cw-industrial.com Christchurch United Kingdom T: +44.1425.271444 F: +44.1425.272655 [email protected] www.cw-industrial.com Shanghai China T: +86.213.3310670 [email protected] www.cw-industrial.com