Electronic Floor Pedal – Low Profile The Electronic Floor Pedal WM-528 EFPA mounts flush with the floor and is designed specifically for applications that require a very low profile. Structural components are comprised of glass reinforced nylon and corrosion resistant steel for use in rugged industrial applications. Additionally, the sensor is located under the mounting surface to shield it from in-cab contamination. The unit is equipped with a Hall-effect, non-contact sensor that can be programmed for analog output and/or integrated switches. The electronics are IP67 sealed and highly EMI resistant (SAE J1113). If necessary, the unit can be customized with contact or PWM output sensors. This pedal is ideal for the material handling industry, sweeper industry and other industrial applications where severe conditions exist and drive by wire pedal control is desirable. SPECIFICATIONS PRODUCT LIFE Full Travel Cycles Electronics IP67 sealed (IEC 60529) SAE J1113 Compliant Operating Voltage Output Signal 5V and 12V-24V Dual APS, Dual PWM, APS, PWM, APS/IVS PEDAL ANGLE Static Load Vibration 1500N 3 hour, 3-axis, random broadband up to 4g Operating Temp Range Storage Temp Range Humidity Sand/Dust Main Body Mounting Plate Composite Plastic Composite Plastic

TYPICAL OUTPUT CHARACTERISTICS (other outputs are available) © 2015 Curtiss-Wright. All rights reserved. Specifications are subject to change without notice. All trademarks are property of their respective owners. USA Portland Oregon T: +1.503.684.8600 F: +1.503.684.3879 [email protected] www.cw-industrialgroup.com Christchurch United Kingdom T: +44.1425.271444 F: +44.1425.272655 [email protected] www.cw-industrialgroup.com Shanghai China T: +86.213.3310670 [email protected] www.cw-industrialgroup.com