Catalogs >
CURTISS-WRIGHT >
Vibration-Tolerant Tilt Sensor VTS2021

Vibration-Tolerant Tilt Sensor VTS2021
2Pages

Catalog excerpts

Vibration-Tolerant Tilt Sensor VTS2021 - 1

Vibration-Tolerant Tilt Sensor  Vibration-tolerant tilt sensor  Thermal compensation  Designed for dynamic applications  Dual-axis – pitch and roll  Dual sensing per axis for error detection  12Vdc or 24Vdc supply  J1939 CANbus output  IP67 enclosure  Integrated Deutsch DT04 connector The VTS2021 is a dual-axis, vibration-tolerant tilt sensor that offers an optimal combination of performance, safety and cost in dynamic applications, such as industrial vehicles. IMU technology and fast-acting software algorithms filter out disturbances caused by vibration and vehicle motion, to provide output stability without the measurement delays usually associated with heavily-damped, alternative sensing methods. Each measurement axis has two sensing elements, which are constantly compared to ensure correct operation. If an error is detected, the condition is communicated to the host electronics; so allowing a safe situation to be assumed. Each output signal is calibrated to account for thermal drift, ensuring accuracy over the operating temperature range. Powered from a voltage supply range of 6-48Vdc, the sensor provides output data over CANbus using J1939 protocol with a choice of baud and frame rates. The sealed design offers exceptional levels of performance with respect to water, dust, shock, vibration and temperature, meaning the sensor is ideal for use in hostile, on- and offhighway vehicle environments. Electrical connection is via an integrated 4-pin Deutsch DT04 connector.

Open the catalog to page 1

Vibration-Tolerant Tilt Sensor VTS2021 - 2

SUPPLY SUPPLY VOLTAGE SUPPLY CURRENT SUPPLY REVERSE POLARITY PROTECTION SHORT-CIRCUIT PROTECTION OVER-VOLTAGE PROTECTION POWER-ON SETTLEMENT_ OUTPUT LINEARITY RESOLUTION OUTPUT NOISE REPEATING ACCURACY THERMAL DRIFT_ EMC DATA RF IMMUNITY POWER FREQUENCY FIELD IMMUNITY CONDUCTED IMMUNITY ELECTROSTATIC DISCHARGE RADIATED EMISSIONS TRANSIENT PROTECTION_ MECHANICAL MAXIMUM OPERATING SPEED WEIGHT_ ENVIRONMENTAL OPERATING TEMPERATURE RANGE STORAGE TEMPERATURE RANGE THERMAL SHOCK SEALING VIBRATION SHOCK DROP TEST MTTFd SALT SPRAY CHEMICAL RESISTANCE 6-48Vdc unregulated <40mA at 12Vdc Up to...

Open the catalog to page 2