Catalogs >
CURTISS-WRIGHT >
JC6000 Multi-axis Joystick Controller

JC6000 Multi-axis Joystick Controller
1 / 16Pages

Catalog excerpts

JC6000 Multi-axis Joystick Controller - 2

The JC6000 rugged joystick controller is designed for demanding operatorcontrol applications in off-highway vehicles and other man-machine interfaces, where strength, reliability, and handle functionality are important. Available in one or two axis configurations, this joystick can be supplied with non-contact Hall effect sensors or long life potentiometer tracks. The JC6000s compact size, high lever strength and superb proportional control are ideal for applications which include operator controls on a wide range of off-highway vehicles, including cranes, loaders, excavators, access...

Open the catalog to page 2

JC6000 Multi-axis Joystick Controller - 3

The JC6000 includes lever mechanics designed to give smooth proportionalcontrol, with Hall effect sensors that provide contactless, long life operation up to15 million operations. Alternative potentiometer tracks featuring multi-fingeredprecious metal wipers give low electrical noise and a long life of greater than 5million operations. > The JC6000 with the Hall sensors option has dual outputsfitted as standard, allowing the signals to be monitored andcompared for failure detection in safety critical applications.Additional independent switch functions can be specified fordirectional and...

Open the catalog to page 3

JC6000 Multi-axis Joystick Controller - 5

Ω at 50Vdc*The long life resistive elements require a high impedance load in the wiper circuit to minimisethe current flowing through the wiper for optimum life conditionsNot available with CANbus output1.5 or 5 either side of center 35 200 resistiveAll primary potentiometer track and directional/center switch connections terminate in a 16-wayAMP 040 series multi-lock connector in the joystick base. Secondary potentiometer track connections terminate in an 8-way AMP 040 series multi-lock connector. See page 8 for pin identitiesSA47931 (AMP 040 16 way connector 174046-2; Pins 175062-1)...

Open the catalog to page 5

JC6000 Multi-axis Joystick Controller - 8

Pin numberPotentiometer tracksHall effect sensors 16-way primary connector 1Y switch track N/O (lever forward +Y)Pins 1 to 12 used for handle connections2X switch track center onSee chosen handle style for details 3 X pot track left - 4X pot track wiper signal- 5X pot track right- 6X pot track center tap- 7 X switch track common- 8X switch track N/O (lever left -X)- 9Y pot track backward- 10Y pot track wiper signal- 11Y pot track forward- 12Y pot track center tap- 13Y switch track commonNot connected 14Y switch track N/O (lever backward -Y)Not connected 15X switch track N/O (lever right...

Open the catalog to page 8

JC6000 Multi-axis Joystick Controller - 9

The HKNhandle is the simplest optionavailable for the JC6000. This handle doesnot include any additional functionality, but isdesigned to allow the joystick to be controlledby the operator gripping the handle palmdownwards. These options are selected when no handle is required to be fitted. NHF option has wires fitted to the joystick connector on the base, through the operating lever. > Developed to replicate the functionality of the traditional mechanical handle, the HB range of hand grips can be specified with either a button or rocker switch, mounted into the top of the handle, within...

Open the catalog to page 9

JC6000 Multi-axis Joystick Controller - 11

HBOHB1HB2HBD Maximum height above flangemm 149155155164 Maximum grip diametermm 35353535 Environmental sealing (IEC60529) IP65IP65IP65IP65 Number of switches 0121 Action Momentary rockerMomentary rockerMomentary button Switch operating forceN ---7 Maximum current @ 30VdcA -2.52.55 Expected life (operations) 100,000100,000100,000100,000 > Common terminal 111111 N/O contact switch 1 441 N/C contact switch 1 1 N/O contact switch 2 1Note: Signals terminate on the 12 way connector (potentiometer version) or the 16 way connector (Hall sensor version) >

Open the catalog to page 11

JC6000 Multi-axis Joystick Controller - 13

110 60 55Top switch Push buttonswitchLeftrocker Person present switch 166 132 Standard rocker profileOptioinal V - rocker profile PinWire color PinWire color Common terminal (for all switches) 11Black Rocker center tap 6Yellow/Red* Switch 1 4Blue Rocker zero or negative supply (L, R or H) 10Pink/Grey Switch 2 3Yellow Rocker output signal (L or H only) 5Pink Switch 3 2Blue/White Rocker output signal (R) 9White Switch 4 1White/Green Rocker switch common 11Black Switch 5 Red Rocker switch (L forward) 2Blue/Orange Switch 6 膆Violet Rocker switch (L backward) 1Green Top switch Pink with marker...

Open the catalog to page 13

JC6000 Multi-axis Joystick Controller - 14

Maximum height above flangemmMaximum grip diametermm Environmental sealing (IEC 60529) Number of switches Action Switch operating forceTrigger N Switch 1 or 2NMaximum current @ 30VdcmA Expected life (operations) Operating temperature踺C Storage temperatureC >

Open the catalog to page 14