C7 Hydraulic Lever
2Pages

{{requestButtons}}

Catalog excerpts

C7 Hydraulic Lever - 1

Arens Controls Hydraulic Lever Control C7 Series (C72) The C7 Series differs from conventional hydraulic levers in that the friction plate bears on a two-inch radius arc rather than merely squeezing a small washer pad at the pivot point. This friction plate allows the operator to move the lever to a desired point and let go of it and it will remain in place. While these control levers can resist operating loads on the output portion of the handle, the operator can effortlessly move the lever. An optional center detent is available which gives a sensory feedback to the operator when they return the lever to center or pass through the center point. The C7 Series are ideal for hydraulic or hydrostatic systems that require simple lever actuation of a cable. The C7 Series is available with two different types of lever arms and two different handle knobs. In addition, the C7 Series is available with or without a steel bezel (sometimes called a Gate-Plate) depending on the Vehicle OEM requirements. Curtiss-Wright can develop custom steel bezels with text or icons based on the Vehicle OEM specifications to help alert the driver to position and function. The lever arm has a 90° arc of travel, with 45° on each side of the center position. The lever arm can be shifted 7.5° to 10° left or right. This feature allows the Vehicle OEM to prevent the operator from freely moving from a reverse position to a forward position and usually requires a Z pattern in the Bezel or Gate Plate. INPUT MOTION OUTPUT LOST MOTION OUTPUT STROKE FREE RUNNING TORQUE FRICTION HOLD DETENT BREAKOUT CONTROL HANDLE Symmetrical Preset at Factory Push-Pull or Rod Linkage Preset at Factory Preset at Factory Optional, preset at factory Small Ball Knob Large Knob Max operating load on Output ±45° forward and back, 90° total Less than 1° Up to 4 inches (101mm) 10 to 35 inch-pounds 9 to 35 inch-pounds 10 to 50 inch-pounds Standard Optional Up to 200 inch-pounds Industrial Group

Open the catalog to page 1
C7 Hydraulic Lever - 2

MECHANICAL DIMENSIONS - for friction control assembly (mm) © 2014 Curtiss-Wright. All rights reserved. Specifications are subject to change without notice. C7-11/17 All trademarks are property of their respective owners. USA Arlington Heights Illinois T: +1.847.844.4700 cwig.us@curtisswright.com www.cw-industrialgroup.com Europe Garching Germany T: +49.89.5404100.0 cwig.de@curtisswright.com www.cw-industrialgroup.com Asia Shanghai China T: +86.213.3310670 cwig.cn@curtisswright.com www.cw-industrialgroup.com

Open the catalog to page 2

All CURTISS-WRIGHT catalogs and technical brochures

  1. S-Drive

    2 Pages

  2. AES-350

    18 Pages

  3. AES-349

    25 Pages

  4. SBW

    3 Pages

  5. SCM100

    3 Pages

  6. wm-67

    2 Pages

  7. wm-672

    2 Pages

  8. wm-674

    1 Pages

  9. wm-68a

    2 Pages

  10. wm-762

    2 Pages

  11. wm-763

    2 Pages

  12. wm-764

    2 Pages

  13. WM-777

    2 Pages

  14. WM-782

    3 Pages

  15. WM-783

    3 Pages

  16. WM 784

    2 Pages

  17. wm-80

    2 Pages

  18. WCS-133284

    5 Pages

  19. WM 81

    2 Pages

  20. WCS-134143

    5 Pages

  21. AES-204

    13 Pages

  22. ML1951

    1 Pages

  23. ML1441 AC

    1 Pages

  24. WM526

    2 Pages

  25. JC050

    2 Pages

  26. JC040

    2 Pages

  27. RF15 Series

    2 Pages

  28. RF11 Series

    2 Pages

  29. PGF7000

    1 Pages

  30. On-Highway

    4 Pages

  31. GK1037

    1 Pages

  32. GK0730

    1 Pages

  33. GD1444

    1 Pages

  34. SRH220DR

    2 Pages

  35. STT280

    2 Pages

Archived catalogs