*mydirectindustry

Catalogs
CURTISS-WRIGHT
SSC SENSOR SIGNAL CONDITIONING MODULE

SSC SENSOR SIGNAL CONDITIONING MODULE

Product catalog summary

Overview: The Penny+Giles SSC Sensor Signal Conditioning Module is designed for use with sensors producing a DC output signal voltage between 0-5Vdc. It provides a 5Vdc source for various sensors and converts the output to a 4-20mA current output or other formats using additional module cards.

Specifications: The SSC operates from a 10-30Vdc unregulated supply and can use a negative supply for reduced noise. It features a rugged IP68 die-cast aluminum housing suitable for harsh environments, with EMC immunity to 100V/m.

Installation: The module is mounted on a bulkhead using M5 screws. Connections are made via IP68 rated cable glands and a screw terminal block. Cable diameters must be between 3-8mm to maintain the IP68 rating.

User Adjustments: The SSC allows for output slope reversal, output type selection (current, voltage, PWM), output current range selection, and zero and gain adjustments. Optional cards extend voltage range and provide PWM output.

Performance: The module supports various output signals and has low output noise. It offers high temperature stability and allows for zero and span adjustments. The operational temperature range is -40 to +100°C.

Compliance and Quality: The SSC is compliant with EMC Directive 89/336/EEC and tested to EN 61000-6-2 standards. Penny+Giles is accredited to BS EN ISO9001:2000, ensuring product reliability.

Ordering Information: The SSC base module is available with current or voltage outputs. Additional cards for extended voltage and PWM outputs are available separately.

Contact Information: Penny+Giles provides contact details for offices in the UK, USA, and Germany for sales and support.

Catalog excerpts

SSC SENSOR SIGNAL CONDITIONING MODULE

Open the catalog to page 1

INNOVATION IN MOTION The new Penny+Giles model SSC is a Sensor Signal Conditioning unit housed in an IP68 protected metal enclosure. It is suitable for use with any sensor that produces a dc output signal voltage in the range 0 - 5Vdc. The SSC also provides a 5Vdc source that may be used as a supply for many types of sensor, including potentiometers, contactless position transducers, tilt sensors, pressure transducers and load cells. Choice of outputs The SSC converts the sensor output voltage signal to a 4 - 20mA (or optional 5 19mA) current output, or by using additional module cards, into...

Open the catalog to page 2

SIGNAL CONDITIONING MODULE PERFORMANCE ELECTRICAL Supply voltage Vdc Over voltage protection Supply current Reverse polarity protection Sensor excitation Sensor output pull down resistor Linearity (circuit only) Output signals (jumper selected) with additional VM card with additional PWM card Output noise - voltage range - current range Output load (voltage output) Output compliance voltage (current output) Output lag ms Influence of variation in supply voltage on output Temperature stability ppm/°C Zero adjustment Span adjustment Output direction 10 - 30 unregulated When optional Voltage Module...

Open the catalog to page 3

Penny+Giles A Curtiss-Wrlght Company Penny & Giles Position sensors and joysticks for commercial and industrial applications. 15 Airfield Road Christchurch Dorset BH23 3TG United Kingdom + 44 (0) 1202 409409 + 44 (0) 1202 409475 Fax [email protected] 36 Nine Mile Point Industrial Estate Cwmfelinfach Gwent NP11 7HZ United Kingdom + 44 (0) 1495 202000 + 44 (0) 1495 202006 Fax [email protected] 5875 Obispo Avenue Long Beach CA 90805 USA + 1 562 531 6500 + 1 562 531 4020 Fax [email protected] The information contained in this brochure on product applications should be used by...

Open the catalog to page 4

All CURTISS-WRIGHT catalogs and technical brochures

Archived catalogs

ICS100 IN-CYLINDER SENSORS
8 Pages