All Dropsa spa catalogues and technical brochures

P. 1

P. 2

MANUAL PUMP WITHOUT RESERVOIR FOR SINGLE LINE – SYSTEM 01LUBRICATION SYSTEMSPump for applications with built-in reservoir and easy operation:simply pull the handle upwards with a quick movement and thenrelease to deliver lubricant.Pump is applied...

P. 1

EXTCHARACTERISTICSEASILY ENGINEER DISTRIBUTED AIR-OIL MQL SYSTEMS WITH MIQUELEXT MAINTAINING CONTINUOUS AND PERFECT AIR/OIL LUBRICATIONSEPARATE PRESSURIZEDTANKSEPARATE AIR OIL SUPPLYCONSTANT FLOW RATEINDEPENDENTLY BY THEINLET AND OUTPUTPRESSURE CHANGESINDEPENDENT...

P. 2

EXTBENEFITSOPERATING PRINCIPLEMIXING ELEMENTOIL DELIVERYEASE TO INSTALL ON THEREGULATIONMACHINEELECTROVALVEREDUCING TOOL WEARBETTER FINISH OF THEWORK PIECEFLOWCOMPENSATINGVALVEPRESSUREGAUGE(AIR OUTPUT)FINISHED PIECE WITHOUTLUBRICANT RESIDUENO DRIPPING...

P. 3

EXTDIMENSIONSReservoir for MiQueL EXT (optional)

P. 4

EXTCONTACTSORDERING INFORMATIONVERSIONSwww.dropsa.comVERSIONDESCRIPTIONCODEMiQueL PRO – EXTAir/Oil modular minimal system with compensation valvewithout a solenoid valve for independent control N(1-8) modules313558NN=1÷8 (Modules)MiQueL PRO...

P. 1

VIP5 ControllerFEATURES• 3 OPERATING MODES:CYCLE, PULSE AND FLOW.• INTEGRATED LCD – ALL OPERATINGVALUES SET BY SIMPLE MENUPARAMETERS• COMPLETE CONTROL ANDPROFILING OF HOW STANDBY ANDLUBRICATION OCCURS• MULTI-CYCLE CAPABLE•...

P. 2

VIP5 Controller3 BRAND NEW OPERATING MODES:1) TIMER – TIME ONLYEngineering Lubrication systems can be tricky when you are trying to get theright amount of lubricant to each point in a single cycle, but with the MultiCyclefeature you can run multiple...

P. 3

VIP5 ControllerOPERATING EXAMPLESVIP5 has three different operating modes which are determined during the setup stage. These are: CYCLE, PULSE and FLOW:CYCLE MODE:Pump onPump in Stand byALARMExample 1) Standby and Lubrication determined by ON & OFF...

P. 4

CoNTACTSwww.d ropsa .comsales@dropsa.comITALYDropsa SpAt. +39 02-250791f.+39 02-25079767U.K.Dropsa (UK) Ltdt. +44 (0)1784-431177f. +44 (0)1784-438598GERMANYDropsa GmbHt. +49 (0)211-394-011f. +49 (0)211-394-013FRANCEDropsa Amet. +33 (0)1-3993-0033f....

P. 1

GBUSAInjector DL - 32DL-32Injector

P. 2

DL – 32 InjectorDL-32 injector has been designed to deliver lubricant to friction points through the feeding linepressure. Flowrate can be adjusted external the unit in order to obtain the flow needed.These injectors are supplied with visual built-in...

P. 1

SMX AIR‐OIL AIR/OIL  MIXING VALVE   FEATURES THE KEY TO REDUCING THE USE OF LUBRICANTS ...  ... INCREASING PRODUCTIVITY '  TWO SEPARATE REVENUE FOR AIR AND OIL  The ...

P. 2

SMX AIR‐OIL        THE ADVANTAGES OF AIR/OIL LUBRICATION MODULAR CONCEPT Of the SMX progressive metering elements allows flexibility of the lubrication system to suit the need of the installed project. COMPATIBILITY  With ...

P. 3

SMX AIR‐OIL  AIR/OIL FITTINGS  Special Air/Oil fittings are two tipes: fittings to be mounted on base  outputs  connectors  to be mounted on lubrication points   Depending on  the connectors  mounted  you can have following types of lubrication: Lubrification spray  Lubrification with oil atomised  Lubrification with only oil (air/oil rough mixture type with terminal spray) (air/oil fine mixture with terminal atomizer) (with terminal spray)   FITTING OUT OF THE BASE  ATOMISED OIL FITTINGS AND SPRAY OIL FITTINGS FITTINGS FOR OIL LUBRICATION  Fittings ...

P. 4

SMX AIR‐OIL CONTACTS ORDERING INFORMATION  1)   Select the code of base assy. According to the number of metering units to be mounted (see table below) 2)  ...

P. 1

CharacteristicsSingle or more pointsLubrication.System 33V version forsmall system applicationsup to 12 valves(0,03÷0,50).Regulation of lubricationcycle frequency (withtimer)PiccolaEntry Level Oil Lubrication Pump for use withMetered Orifice Systems...

P. 2

TECHNICALContactsINFORMATIONSMax. pressureMax Output Volume-5 C+140°F)- 20 C +60 C (-4°F90% maxIP-44IP-4424/110/220V – 50 Hz24/110/220V – 50 HzPower Consumption90 W90 WOptional Time Module(110/220V only)f. +44 (0)1784-438598+140°F)-...

P. 1

P. 2

P. 3

Orifice System 01 An alternative to the 33V for entry level low cost manual systems The 01 System conssts of meter units (calibrated 'orifices') that balance the distribution line pressure and divide the oil from the pump proportionally across the...

P. 4

GREASE LUBRICATION Grease lubrication has a wide field of application ranging from small machines such as woodworking machinery to large heavy industry such as Steel Plants or Faper Mills. Dropsa provides an extensive line of equipment for grease lubrication...

P. 5

PROGRESSIVE DIVIDER SYSTEM 26: (SMX - SMO - SMM ) The Rogressve divider distributes the flow of a pump into separate 'progressve outlets by the use of a progressve spool arrangement. Positive lubrication feedback for all of the points can be achieved...