Characteristics ■ Flow rate: 4,5 gr. of LUBRICAT PER STROKE ■ LOW FLOW RATE AND HIGHT PRESSURE ■ Output of lubricant: 3/8 gas conic High pressure hand pump Robust construction with proven long life. Pumps supply 4.5 gr. lubricant per stroke and can overcome a maximum back pressure of 350 bar. The lubricant supply takes place during the downwards stroke of the operating lever. To set lever into its non-operating position, i.e. downwards, to avoid lubricant escaping from the pump, rotate the knurled knob of the needle valve in an anticlockwise direction, pumps are supplied with an outlet filter, (code 1113210) screwed 3/8 BSP female. The pump is equipped with filter. Part 1 to 26 are components of pumping ass. y code 133070

HIGH PRESSURE HAND PUMP CONTACTS www.dropsa.com [email protected] ITALY Dropsa SpA t. +39 02-250791 f.+39 02-25079767 U.K. Dropsa (UK) Ltd t. +44 (0)1784-431177 f. +44 (0)1784-438598 PUMP MAINTENANCE at least once a year, it is advisable to clean the inner of the pump. When pumps operate in dusty places or supplies lubricant containing additives, it is advisable to clean more frequently. To effect cleaning, disconnect tubes, remove the pump body from the drum and clean the filter-cartridge with gasoline or oil. Clean pump body by pumping gasoline or oil, dry the inner part of the drum carefully...