DropsA CHARACTERISTICS Usable for: - Non-alloy steel - Low alloy steel - Special carbon steel - Brass - Aluminium - Copper IDEAL FOR - mechanical machining and grinding - medium harsh generic cutting operations MaXtreme Oil This is a whole oil with marked c haracteristics aimed at the ecological aspects, for mulated with bases of natural origin. Formulated for applications with minimum quantity lubrication systems, it can be used in medium harsh generic cutting operations. The innovative characteristics of the fluid make it ideal for the generation of air-oil mixture micro particles for internal and external tool operations. Its composition contributes to protecting the work environment, reducing waste water and lowering consumption. It is made up of a synthetic-based ester in a compound with greasing, anti-oxidant and metallic passivating agents which, applying a strong synergistic action together, guarantee: • absence of smoke and vapours in machining; • a high flammability point for operations in complete safety; • excellent fluidity even at low temperature and an exceptional wetting power, therefore the oil spreads over the metallic surface quickly and evenly; • outstanding greasing and lubro-releasing powers for quality finishes; • good resistance to oxidation and rust; • good anti-wear powers; • a high heat removal efficiency with reduced temperatures of the machined pieces. The product is free of chlorinated derivatives. APPLICATIONS • Plastic deformation • Milling • Lathe turning • Threading • Boring • Cutting • Deep drawing • Blanking Physical and chemical properties

MINIMUM QUANTITY LUBRICATION DropsA The purpose of dry machining is to replace the traditional coolant or whole oil system in a work environment with a compressed air flow, generating an ultra thin film of "aerosol" mixture that goes through the spindle and the coolant channels of the ut ensil and reaches the cutting point directly. This guarantees high performance linear lubrication in the machining. Minimum quantity lubrication systems (MQL) and Dry machining The lubrication system can be used in two ways: External Lubrication: the air-oil mixture arrives on the surface through a nozzle. Internal...