Easy use and maintenance front‐mounted controls; Independent controls of different banks of Micro‐ pumps; Coaxial air/oil or singlepipe system with a single component; Minimal Air/Oil System Lubrication Minimal Air/Oil Lubrication Panel Air/Oil Minimal lubrication is a relatively new technology that has been used successfully to substitute costly Oil Re‐circulation and non environmentally‐sound Mist Systems. It has provided excellent results both in terms of performance and total system cost. • Oil flow variable to each point; • Air exclusion on single point, for oil only operation; • Independent adjustable air and oil; • Adjustable mixing air flow to each point; • Command mini pumps with pneumatic timer or air solenoid; • Minipumps can also be controlled using pneumatic limit switch or inductive sensors; Vip4Tools/Pro is designed for high performance at a low cost, it is distinguished by its compactness. The system comprises a pneumatically controlled mini‐pump and the mixer base. The mini‐pump can be manually regulated to cover a wide range of needs (0‐30 mm³). The modularity of the system allows extreme versatility by allowing different numbers of base mixing‐manifolds to be installed accordingly. The components are positioned at the front of the mounting panel to allow the user to easily perform regulation of the micro‐pumps and air regulation. The ABS box is provided for protection of all the micropumps and tubing. Steel box versions are also available for harsher environments. The mixing bases incorporate a flow regulator than can be completed set to zero for the exclusion of the air that allows operation oil only. The air regulation is independent for each base unit and can be set in a differential manner. Additionally, a small pressure gauge can be mounted on each base to have visual indication of pressure setting. The system is also distinguished by the simplicity of the oil micro‐pump output regulation and the mixing air flow for each individual item by the easy access fully accessible by the user. The system offers the possibility to form, with the inclusion of appropriate screw‐inserts into the mixing bases , two separate banks of bases that have common air and pump manifolds.. Example of notation : 2 +2 +6‐> 1bank of 2pt micro‐pumps +1 bank of2pt micropumps + 1 bank of 6 micropumps for a total of 10 pts. lubrication (with 3 separate pump commands) VIP4 ToolsPro Advantages: • Spray mist is not generated but a mixture of air/oil; • Modularity allows easy maintenance and low cost; • Save lubricant due to minimal oil dosage; • Positive environmental impact; • Significant reduction in process costs. • Work environment more healthy without coolant; In the past, excessive oil has been used often only to ensure that the ‘system is working’. This oil generates heat and has to be taken away from the lubrication point. It is ideal for use on Bearings, High Speed Bearings, Gears and also in certain circumstances on Guides. It is particularly suited to Spindle Lubrication. TECHNICAL SPECIFICATIONS Air supply pressure Working humidity Permitted lubricants Oil viscosity at working temperature Conservation temperature

VIP4 ToolsPro with solenoid (Fig.4) Air/Oil Panel 3Lt. 3+3 points Cod. 3704333

Conctacts www.dropsa.com [email protected] ITALIA Dropsa SpA t. +39 02‐250791 f.+39 02‐25079767 U.K. Dropsa (UK) Ltd t. +44 (0)1784‐431177 f. +44 (0)1784‐438598 GERMANY Dropsa GmbH t. +49 (0)211‐394‐011 f. +49 (0)211‐394‐013 FRANCE Dropsa Ame t. +33 (0)1‐3993‐0033 f. +33 (0)1‐3986‐2636 ESPAÑA Polydrop, S.A. t. +34 (0)93‐260‐22‐50 f. +34 (0)93‐260‐22‐51 U.S.A. Dropsa Corporation t. +1 586‐566‐1540 f. +1 586‐566‐1541 AUSTRALIA Dropsa Australia Ltd. t. +61 (0)2‐9938‐6644 f. +61 (0)2‐9938‐6611 BRAZIL Dropsa Remonlub t. +55 (0)11‐563‐10007 f. +55 (0)11‐563‐19408 ...