DL-32 G AND DL-32 O INJECTORS The DL-32 Injector series has been designed to deliver lubricant to friction points through a single pressurized lubrication line. The DL-32 product line offers a variety of features and are adjustable to obtain specific flowrates for application requirements or end user needs. These injectors are supplied with built-in visual level indicators to monitor operation and ensure functionality of the lubrication solution. DL-32 injectors are available in different configurations: One to four outlets. Every injector, mounted within a manifold, can be easily inspected, or replaced, without disassembling the entire unit or removing mainline, or secondary unaffected, fittings or piping. These assemblies can be installed in any position and can be utilized with other styles of injectors, if necessary. Grease Version LUBRICANT Oil - FLOW RATE Min Max 0.02 cm³ 0.13 cm³ (0.0012 (0.008 cu.in.) cu.in.) SPARE INJECTOR Version Steel, compression pipe 1/8” Steel, push-in pipe 1/8” Stainless steel, taper 1/8” WORKING PRESSURE Max Typical 240 bar 103 bar (3528 psi) (1514 psi)

DL-32 G AND DL-32 O INJECTORS Oil Version LUBRICANT Oil Min 32 cSt FLOW RATE Min Max 0.02 cm³ 0.13 cm³ (0.0012 (0.008 cu.in.) cu.in.) WORKING PRESSURE Max Typical 240 bar 103 bar (3528 psi) (1514 psi) Notes: 1. Injectors include compression nut and cone for tubing Ø 1/8”. Outlet connectors for the feed line are optional. 2. Injectors utilize NBR gaskets (194°F/90°C max). Please, check compatibility with synthetic lubricants. 3. Injectors with manifolds include two mounting clips and screws, Ø 1/4” 20 UNC 4. Output with indicator cap is hand tightened to 0.02 cm3 (0.0012 cu in). Dropsa products...