Catalogs >
Dropsa spa >
Locopump S3

Locopump S3
2Pages

Catalog excerpts

SINGLE-ACTING PNEUMATIC PUMP; 2KG AND 0.5 KG GREASE RESERVOIR CAPACITY MINIMAL LEVEL SENSOR AS STANDARD; A SIMPLE YET VERSATILE PNEUMATIC PUMP IDEAL FOR USE IN SMALL AND MEDIUM SINGLE-LINE PROGRESSIVE DIVIDER SYSTEMS LOCOPUMP S3 is an ideal single acting pneumatic pump generally used in single line progressive divider lubrication systems such as nP- nPr, SMX, SMO, SMP or SMPM. LOCOPUMP S3 is available with 0.5 and 2 kg reservoir with spring loaded follower plate, which means it can easily handle NLGI grade 2 grease. The transparent reservoir allows the user to clearly see the quantity of grease remaining and a low-level grease switch is present to provide remote alarm signals to the machine it is mounted on. Additionally, the reservoir lid can be installed with a Dropsa maximum level sensing device. GREASE PUMP High Reliability is guaranteed by the use of hardened steel in the construction in all the pumping element components and the pump piston is manufactured in ground-hardened steel. The front Fill port is also equipped with a filling filter to ensure that only clean lubricant enters the reservoir. The pump provides a simple but very cost-effective solution for use on many small to mid-range grease lubrication systems and is ideal to be used on machines where compressed air is available. TECHNICAL INFORMATION TECHNICAL CHARACTERISTICS 44 ÷ 88 psi (3 ÷ 6 bar) G 1/8 UNI - ISO 228/1 with cone seating for 6mm tube Reservoir refilling Lubricant outlet Grease nipple with check valve UNI 7663 – “A“ – 1/8“ NPT UNI – ISO 228/1 G¼ Reservoir return Fixed delivery Lubricants allowed Piston total stroke Working temperature LUBRICATION IN VEHICLES AND MOBILE PLANTS; MACHINE TOOLS: SUCH AS MACHINES FOR WORKING SHEET METAL OR WOOD;

Open the catalog to page 1

LOCOPUMP S3 DIMENSIONS (NOT TO SCALE) 152 Venting point LUBRICANT OUTLET AIR INLET G1/8" BSP compression fitting for Ø 6 pipe LUBRICANT INLET Valve-operated lubricator UNI 7663-"A" - 1/8" ORDER INFORMATION DESCRIPTION LOCOPUMP S3 R=50:1 LOCOPUMP S3 R=50:1 Preloaded LOCOPUMP S3 R=50:1 SPARE PARTS DESCRIPTION Tank 4.4 lb (2 Kg) 1.1 lb (0.5 Kg) Fixing plate Pump body Minimum level sensor Refilling filter Gasket exchange kit Delivery regulation kit Pressure gauge Dropsa products can be purchased from Dropsa branches and authorized distributors, visit www.dropsa.com/contact or contact us at...

Open the catalog to page 2

Locopump S3 2Pages

Catalog excerpts

All Dropsa spa catalogs and technical brochures

Locopump S3
2Pages