DL-33 G AND DL-33 O INJECTORS The DL-33 injector line was developed to provide a precise amount of lubricant to points of friction in situations where high pressure is required. The compact product design allows for several DL33s to be installed in line within a small, confined space. The output flow is adjustable externally which allows the end user to adjust for the necessary amount of lubricant to meet application requirements. DL33 injectors have a visual indicating pin incorporated within the valve to confirm proper lubrication and functionality of the lubrication system. The valves are mounted within manifolds, available from 1 to 7 outlets. Each DL33 injector can be easily inspected, assembled, or disassembled from the manifold without removing any fittings or tubing. Additionally, the product can be mounted in any orientation. DropsA can also provide customized manifolds to meet specific requirements. Grease Version LUBRICANT Oil - FLOW RATE Min Max 0.016 cm³ (0.001 cu.in.) OPERATING PRESSURE Max Typical 241 bar (3500 psi)

FLOW RATE Min Max 0.026 cm³ (0.0016 cu.in.) OPERATING PRESSURE Max typical 69 bar (1000 psi) Notes: 1. The injectors include the compression nut and cone for Ø 1/8” pipe. 2. The injectors have VITON gaskets. Check compatibility with the use of synthetic lubricants. 3. For injectors with manifold, two assembly brackets are included with relative 1/4” 20UNC hex-head screws. 4. With the indicator head completely tightened, the output is 0.026 cm³ (0.0016 cu in). Dropsa products can be purchased from Dropsa subsidiary and Dropsa sales representatives, visit www.dropsa.com/contact or contact us [email protected]...