> Badotherm Group
Stand

All Badotherm Group catalogues and technical brochures

  1. MLR - Magnetic level indicator with colored rollers

    MLR - Magnetic level indicator with colored rollers

    1 Pages

    En

    Here the first 1 pages from the catalogue "MLR - Magnetic level indicator with colored rollers"

    P. 1

    magnetic level indicator model MLRColumn of colored rollers indicate the level in the tankBadotherm magnetic level gauges are designed for gauging liquids whereglass, gaskets threaded connection etc cannot be tolerated because ofcorrosion problems, toxic...
  2. MLD - Magnetic level indicator

    MLD - Magnetic level indicator

    1 Pages

    En

    Here the first 1 pages from the catalogue "MLD - Magnetic level indicator"

    P. 1

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com01/01/2006 rev 23025.1.1level instrumentationmagnetic level indicator model MLDIndicates the level in the tank on a scaleBadotherm magnetic level gauges are...
  3. L-series - process level gauge with large chambers

    L-series - process level gauge with large chambers

    1 Pages

    En

    Here the first 1 pages from the catalogue "L-series - process level gauge with large chambers"

    P. 1

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com01/01/2006 rev 22985.1.1level instrumentationprocess level gauges series LLarge chamber gauges for easy level reading of boiling liquidsThese gauges are highly...
  4. FF-2000 - tubular level gauge for low pressure boiler drums

    FF-2000 - tubular level gauge for low pressure boiler drums

    1 Pages

    En

    Here the first 1 pages from the catalogue "FF-2000 - tubular level gauge for low pressure boiler drums"

    P. 1

    tubular level gauges series FF-2000level gauges for low pressure and boiler drum applicationsTubular glass level gauges comprise a length of 19 mm outside diameterdrawn borosilicate glass tube fitted each end with an offset isolating valve topermit connection...
  5. M5N - direct mounted five valve instrument manifold

    M5N - direct mounted five valve instrument manifold

    2 Pages

    En

    Here the first 2 pages from the catalogue "M5N - direct mounted five valve instrument manifold"

    P. 1

    technical specification modelmoc inlet outlet ventAISI316 1/2"NPT-f flanged 2x 1/4"NPT-f (plugged)venting bonnet equalizing bonnetisolating bonnet stemtop side top side x2 right and left side HSpacking pressure temperature bracket holesPTFE 413 (6000)...

    P. 2

    M5N - additional informationoptions and special execution at extra costmoc carbon steel, AISI316L, AISI304, Monel, Hastelloyinlet other sizes on requeststem SOpacking PTFE glass filled, graphoilpressure up to 700 bar (10.000 psi)temperature up to 550°Chandle...
  6. M5G - remotely mounted five valve instrument manifold

    M5G - remotely mounted five valve instrument manifold

    2 Pages

    En

    Here the first 2 pages from the catalogue "M5G - remotely mounted five valve instrument manifold"

    P. 1

    technical specification modelmoc inlet outlet ventAISI316 1/2” NPT-f 1/2” NPT-f 2x 1/4"NPT-f (plugged)venting bonnet equalizing bonnet x2 isolating bonnet stemfront side front side right and left side HSpacking pressure temperature bracket...

    P. 2

    M5G - additional informationoptions and special execution at extra costmoc carbon steel, AISI316L, AISI304, Monel, Hastelloyinlet other sizes on requestoutlet other sizes on requeststem SOgland packing PTFE glass filled, graphoilpressure up to 700 bar...
  7. M5A1 - remotely mounted five valve manifold

    M5A1 - remotely mounted five valve manifold

    2 Pages

    En

    Here the first 2 pages from the catalogue "M5A1 - remotely mounted five valve manifold"

    P. 1

    technical specification modelmoc inlet outlet ventAISI316 1/2” NPT-f 1/2” NPT-f 2 x 1/4"NPT-fventing bonnet equalizing bonnetisolating bonnet stemfront side front side left and right side HSpacking pressure temperature bracket holesPTFE 413...

    P. 2

    M5A1 - additional informationoptions and special execution at extra costmoc carbon steel, AISI316L, AISI304, Monel, Hastelloyinlet other sizes on requestoutlet other sizes on requeststem SOgland packing PTFE glass filled, graphoilpressure up to 700 bar...
  8. M5A - remotely mounted five valve manifold

    M5A - remotely mounted five valve manifold

    2 Pages

    En

    Here the first 2 pages from the catalogue "M5A - remotely mounted five valve manifold"

    P. 1

    technical specification modelmoc inlet outlet ventAISI316 1/2” NPT-f 1/2” NPT-f 2 x 1/4"NPT-f (plugged)venting bonnet equalizing bonnetisolating bonnet stemright and left side front side 25 DEG right and HSleft sidepacking pressure temperature...

    P. 2

    M5A - additional informationoptions and special execution at extra costmoc carbon steel, AISI316L, AISI304, Monel, Hastelloyinlet other sizes on requestoutlet other sizes on requeststem SOgland packing PTFE glass filled, graphoilpressure up to 700 bar...
  9. M3T - direct mounted three valve manifold

    M3T - direct mounted three valve manifold

    2 Pages

    En

    Here the first 2 pages from the catalogue "M3T - direct mounted three valve manifold"

    P. 1

    technical specification modelmoc inlet outlet ventAISI316 1/2” NPT-f flanged 2 x 1/4"NPT-f (plugged)equalizing bonnet isolating bonnet stem packingtop side right and left side HS PTFEpressure temperature bracket holes413 (6000) bar (psi) 240°C...

    P. 2

    M3T - additional informationoptions and special execution at extra costmoc carbon steel, AISI316L, AISI304, Monel, Hastelloyinlet other sizes on requeststem SOgland packing PTFE glass filled, graphoilpressure up to 700 bar (10.000 psi)temperature up to...
  10. M3S - remote mounted three valve manifold

    M3S - remote mounted three valve manifold

    2 Pages

    En

    Here the first 2 pages from the catalogue "M3S - remote mounted three valve manifold"

    P. 1

    technical specification modelmoc inlet outlet ventAISI316 1/2” NPT-f 1/2” NPT-f 2 x 1/4"NPT-f (plugged)equalizing bonnet isolating bonnet stem packingfront side right and left side HS PTFEpressure temperature bracket holes413 (6000) bar (psi)...

    P. 2

    M3S - additional informationoptions and special execution at extra costmoc carbon steel, AISI316L, AISI304, Monel, Hastelloyinlet other sizes on requestoutlet other sizes on requeststem SOgland packing PTFE glass filled, graphoilpressure up to 700 bar...
  11. M3D - remote mounted three valve manifold

    M3D - remote mounted three valve manifold

    2 Pages

    En

    Here the first 2 pages from the catalogue "M3D - remote mounted three valve manifold"

    P. 1

    technical specification modelmoc inlet outlet ventAISI316 1/2” NPT-f 1/2"BSP-F 2 x 1/4"NPT-f (plugged)equalizing bonnet isolating bonnet stem packingfront side left and right side HS PTFEpressure temperature bracket holes413 (6000) bar (psi) 240°C...

    P. 2

    M3D - additional informationoptions and special execution at extra costmoc carbon steel, AISI316L, AISI304, Monel, Hastelloyinlet other sizes on requestoutlet other sizes on requeststem SOgland packing PTFE glass filled, graphoilpressure up to 700 bar...
  12. M3A - direct mounted three valve manifold

    M3A - direct mounted three valve manifold

    2 Pages

    En

    Here the first 2 pages from the catalogue "M3A - direct mounted three valve manifold"

    P. 1

    technical specification modelmoc inlet outlet ventAISI316 1/2” NPT-f flanged noequalizing bonnet isolating bonnet stem packing30° top side left and right side HS PTFEpressure temperature bracket holes413 (6000) bar (psi) 240°C provideddesign...

    P. 2

    M3A - additional informationoptions and special execution at extra costmoc carbon steel, AISI316L, AISI304, Monel, Hastelloyinlet other sizes on requeststem SOgland packing PTFE glass filled, graphoilpressure up to 700 bar (10.000 psi)temperature up to...
  13. M2H - direct mounted two valve manifold

    M2H - direct mounted two valve manifold

    2 Pages

    En

    Here the first 2 pages from the catalogue "M2H - direct mounted two valve manifold"

    P. 1

    technical specification model M2Hmoc inlet outlet ventAISI316 1/2” NPT-f 1/2” NPT-f 1/4" NPT-f (plugged)venting bonnet isolating bonnet stem packingtop side front side HS PTFEpressure temperature bracket holes420 (6000) bar (psi) 240°C...

    P. 2

    M2H - additional informationmanifold options and special execution at extra costmoc carbon steel, AISI316L, AISI304, Monel, Hastelloyinlet other sizes on requestoutlet other sizes on requeststem SOpacking PTFE glass filled, graphoilpressure up to 700...
  14. M2F - direct mounteed two way valve manifold

    M2F - direct mounteed two way valve manifold

    2 Pages

    En

    Here the first 2 pages from the catalogue "M2F - direct mounteed two way valve manifold"

    P. 1

    technical specification modelmoc inlet outlet ventAISI316 1/2” NPT-f flanged 1/4" NPT-f (plugged)venting bonnet isolating bonnet stem packingfront side 15° angle top side HS PTFEpressure temperature bracket holes413 (6000) bar (psi) 240°C...

    P. 2

    M2F - additional informationoptions and special execution at extra costmoc carbon steel, AISI316L, AISI304, Monel, Hastelloyinlet other sizes on requeststem SOpacking PTFE glass filled, graphoilpressure up to 700 bar (10.000 psi)temperature up to 550°Chandle...
  15. M2A - remotely mounted two way valve manifold

    M2A - remotely mounted two way valve manifold

    2 Pages

    En

    Here the first 2 pages from the catalogue "M2A - remotely mounted two way valve manifold"

    P. 1

    front sidetechnical specification modelmoc inlet outlet ventAISI316 1/2” NPT-f 1/2"NPT-f 1/4" NPT-f (plugged)venting bonnet isolating bonnet stem packing15° angle top side front side HS PTFEpressure temperature bracket holes413 (6000) bar (psi)...

    P. 2

    M2A - additional informationoptions and special execution at extra costmoc carbon steel, AISI316L, AISI304, Monel, Hastelloyinlet other sizes on requestoutlet other sizes on requeststem SOgland packing PTFE glass filled, graphoilpressure up to 700 bar...
  16. B8 - block and bleed needle valve

    B8 - block and bleed needle valve

    2 Pages

    En

    Here the first 2 pages from the catalogue "B8 - block and bleed needle valve"

    P. 1

    technical specification modelmoc inlet outlet ventAISI316 1/2” NPT-F 1/2"NPT-f 5/16" x 24unf stemventing bonnet isolating bonnet stem packing- top side HS PTFEpressure temperature bracket holes413 (6000) bar (psi) 240°C -design information.....

    P. 2

    B8 - additional informationoptions and special execution at extra costmoc carbon steel, AISI316L, AISI304, Monel, Hastelloyinlet other sizes on requestoutlet other sizes on requeststem SOgland packing PTFE glass filled, graphoilpressure up to 700 bar...
  17. TS - flush diaphragm tank spud seal

    TS - flush diaphragm tank spud seal

    2 Pages

    En

    Here the first 2 pages from the catalogue "TS - flush diaphragm tank spud seal"

    P. 1

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com03/09/2007 rev 2-B218chemical seals3.1.1.chemical seal TS flush diaphragm, Tank Spud typetypical “TS” seal applicationsto combine with industrial...

    P. 2

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com01/01/2006 rev 22193.1.1.chemical sealsTank spud seal type TS* Weld spuds ( not included ) but available on requestTemperature effect is per +10 °C and...
  18. SA-serie - Sanitary flush diaphragm seal

    SA-serie - Sanitary flush diaphragm seal

    3 Pages

    En

    Here the first 3 pages from the catalogue "SA-serie - Sanitary flush diaphragm seal"

    P. 1

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com03/09/2007 rev 2-B212chemical seals3.1.1.chemical seal SAF, SAM, SAT flush diaphragm, sanitary typetypical “SAF, SAM, SAT” seal applicationsfor...

    P. 2

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com01/01/2006 rev 22133.1.1.chemical sealsTemperature effect is per +10 °C and measured from 20 °C.minimum ranges on gauges and transmitters per diaphragmDiaphragm...

    P. 3

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com01/01/2006 rev 2214chemical seals3.1.1.chemical seal SAF, SAM, SAT flush diaphragm, sanitary typeModel Size DN P rating dD DSAT 1 1/2” 40 32 50.5SAT...
  19. APC - Aseptic flush diaphragm chemical seal

    APC - Aseptic flush diaphragm chemical seal

    2 Pages

    En

    Here the first 2 pages from the catalogue "APC - Aseptic flush diaphragm chemical seal"

    P. 1

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com03/09/2007 rev 2-B220chemical seals3.1.1.chemical seal APC flush diaphragm, aseptic typetypical “APC” seal applicationsfor hygienic processes in...

    P. 2

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com01/01/2006 rev 22213.1.1.chemical sealsAPC aseptic connection sealtemperature effect on transmitter, capillary and sealDiaphragm diameters dD Temp. effect...
  20. USL - Low pressure, internal diapragm chemical seal threaded type

    USL - Low pressure, internal diapragm chemical seal threaded type

    2 Pages

    En

    Here the first 2 pages from the catalogue "USL - Low pressure, internal diapragm chemical seal threaded type"

    P. 1

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com03/09/2007 rev 2-B226chemical seals3.1.1.chemical seal USL internal diaphragm, low pressure threaded typetypical “USL” seal applicationsto combine...

    P. 2

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com01/01/2006 rev 22273.1.1.chemical sealsminimum ranges for gauges and transmitters per diaphragmDiaphragm diameters dD Min. span in mbar Min. range in barFor...
  21. US - Internal diaphragm chemical seal threaded type

    US - Internal diaphragm chemical seal threaded type

    2 Pages

    En

    Here the first 2 pages from the catalogue "US - Internal diaphragm chemical seal threaded type"

    P. 1

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com03/09/2007 rev 2-B224chemical seals3.1.1.chemical seal US internal diaphragm, threaded typetypical “US” seal applicationsto combine with industrial...

    P. 2

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com01/01/2006 rev 22253.1.1.chemical sealsminimum ranges for gauges and transmitters per diaphragmDiaphragm diameters dD Min. span in mbar Min. range in barFor...
  22. US - internal diaphagm chemical seal flanged type

    US - internal diaphagm chemical seal flanged type

    2 Pages

    En

    Here the first 2 pages from the catalogue "US - internal diaphagm chemical seal flanged type"

    P. 1

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com03/09/2007 rev 2-B230chemical seals3.1.1.chemical seal US internal diaphragm, flanged typetypical “US” seal applicationsto combine with industrial...

    P. 2

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com06/08/2007 rev 2-B2313.1.1.chemical sealsCapillary executionUpper parts are interchangeable with the full range of process flange connectionsProcess flanges...
  23. EC-serie - Internal diaphragm chemical seal

    EC-serie - Internal diaphragm chemical seal

    2 Pages

    En

    Here the first 2 pages from the catalogue "EC-serie - Internal diaphragm chemical seal"

    P. 1

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com13/02/2006 rev 2-A228chemical seals3.1.1.chemical seal EC internal diaphragm, threaded typetypical “EC” seal applicationsto combine with mechanical...

    P. 2

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com28/04/2006 rev 2-A2293.1.1.chemical sealsTemperature effect is per +10 °C and measured from 20 °C.Minimum ranges on gauges and transmitters per diaphragmDiaphragm...
  24. EXT-BC - Cell type chemical seal with extended diaphragm

    EXT-BC - Cell type chemical seal with extended diaphragm

    2 Pages

    En

    Here the first 2 pages from the catalogue "EXT-BC - Cell type chemical seal with extended diaphragm"

    P. 1

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com03/09/2007 rev 2-B204chemical seals3.1.1.typical “EXT-BC” seal applicationsto combine with industrial process transmitters.to combine with mechanical...

    P. 2

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com02/05/2006 rev 2-A2053.1.1.chemical sealstemperature effect is per +10 °C and measured from 20 °C.“H” to be specified capillary executionminimum...
  25. EXT - Chemical seal with extended diaphragm

    EXT - Chemical seal with extended diaphragm

    2 Pages

    En

    Here the first 2 pages from the catalogue "EXT - Chemical seal with extended diaphragm"

    P. 1

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com03/09/2007 rev 2-B194chemical seals3.1.1.typical “EXT” seal applicationsto combine with industrial process transmitters.to combine with mechanical...

    P. 2

    Temperature effect is per +10 °C and measured from 20 °C.“H” to be specified capillary execution“H” to be specified threaded executionFor technical data sheets and dimensional drawings please refer to our website www.badotherm.com02/05/2006...
  26. BRF-LGP - Raised face covered, low gauge pressure chemical seal

    BRF-LGP - Raised face covered, low gauge pressure chemical seal

    2 Pages

    En

    Here the first 2 pages from the catalogue "BRF-LGP - Raised face covered, low gauge pressure chemical seal"

    P. 1

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com03/09/2007 rev 2-B196chemical seals3.1.1.typical “BRF-LGP” seal applicationsto combine with industrial process transmitters.to very low, highly...

    P. 2

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com01/01/2006 rev 21973.1.1.chemical sealsminimum ranges for gauges and transmitters per diaphragmDiaphragm diameters dD Min. span in mbar Min. range in barFor...
  27. BRF -Raised face covered chemical seal with flush diaphragm

    BRF -Raised face covered chemical seal with flush diaphragm

    2 Pages

    En

    Here the first 2 pages from the catalogue "BRF -Raised face covered chemical seal with flush diaphragm"

    P. 1

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com03/09/2007 rev 2-B190chemical seals3.1.1.typical “BRF” seal applicationsto combine with industrial process transmitters.to combine with mechanical...

    P. 2

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com01/01/2006 rev 21913.1.1.chemical sealsTemperature effect is per +10 °C and measured from 20 °C.Capillary executionThreaded executionminimum ranges...
  28. BRC - Raised face covered, cell type chemical seal

    BRC - Raised face covered, cell type chemical seal

    2 Pages

    En

    Here the first 2 pages from the catalogue "BRC - Raised face covered, cell type chemical seal"

    P. 1

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com03/09/2007 rev 2-B202chemical seals3.1.1.typical “BRC” seal applicationsto combine with industrial process transmitters.to combine with mechanical...

    P. 2

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com01/01/2006 rev 22033.1.1.chemical sealsTemperature effect is per +10 °C and measured from 20 °C.Cell type seal with side capillaryCell type seal...
  29. BF-LGP - Low gauge pressure chemical seal with flush diaphragm

    BF-LGP - Low gauge pressure chemical seal with flush diaphragm

    2 Pages

    En

    Here the first 2 pages from the catalogue "BF-LGP - Low gauge pressure chemical seal with flush diaphragm"

    P. 1

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com03/09/2007 rev 2-B192chemical seals3.1.1.typical “BF-LGP” seal applicationsto combine with industrial process transmitters.for very low, highly...

    P. 2

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com01/01/2006 rev 21933.1.1.chemical sealsminimum ranges for gauges and transmitters per diaphragmDiaphragm diameters dD Min. span in mbar Min. range in barFor...
  30. BF -Chemical seal with flush diaphragm

    BF -Chemical seal with flush diaphragm

    2 Pages

    En

    Here the first 2 pages from the catalogue "BF -Chemical seal with flush diaphragm"

    P. 1

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com03/09/2007 rev 2-B188chemical seals3.1.1.typical “BF” seal applicationsto combine with industrial process transmitters.to combine with mechanical...

    P. 2

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com01/01/2006 rev 21893.1.1.chemical sealsTemperature effect is per +10 °C and measured from 20 °C.Capillary executionThreaded executionminimum ranges...
  31. BC - Cell type flush diaphragm chemical seal

    BC - Cell type flush diaphragm chemical seal

    2 Pages

    En

    Here the first 2 pages from the catalogue "BC - Cell type flush diaphragm chemical seal"

    P. 1

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com03/09/2007 rev 2-B200chemical seals3.1.1.typical “BC” seal applicationsto combine with industrial process transmitters.to combine with mechanical...

    P. 2

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com01/01/2006 rev 22013.1.1.chemical sealsminimum ranges for gauges and transmitters per diaphragmDiaphragm diameters dD Min. span in mbar Min. range in barFor...
  32. Thermowells

    Thermowells

    14 Pages

    En

    Here the first 5 pages from the catalogue "Thermowells"

    P. 1

    2 temperature instrumentationtemperature instrumentation

    P. 2

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com01/01/2006 rev 2 temperature instrumentation2.3. thermowells2.3.1. general informationabout thermowells 1452.3.2. thermowell executionsbuilt up wells1/2" x...

    P. 3

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com01/01/2006 rev 2temperature instrumentationinstrumentation index2.1.1.

    P. 4

    144 For technical data sheets and dimensional drawings please refer to our website www.badotherm.com01/01/2006 rev 22.3.1.temperature instrumentationthermowells

    P. 5

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com 14501/01/2006 rev 2thermowellsThermowells from Badotherm are precision components manufactured to the highest standardsfrom barstock, forgings or fabricated...
  33. BDTG32 - contact stainless steel gasfilled capillary thermometer

    BDTG32 - contact stainless steel gasfilled capillary thermometer

    3 Pages

    En

    Here the first 3 pages from the catalogue "BDTG32 - contact stainless steel gasfilled capillary thermometer"

    P. 1

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com21/01/2008 rev 0118-bisBDTG32-DISTANCE2.1.2.contact stainless steel gasfilled capillary thermometerBadotherm gasfilled model BDTG32 series thermometer is available...

    P. 2

    type C type EBDTG32-DISTANCE - technical data sheet118-bis-1operating detailsworking range temperature limitations___ bar maximum (without thermowell)pressure rating of stem25 bar maximum (without termowell)design informationingress protection designIP...

    P. 3

    118-bis-2dimensionsns d d1 L S S1 - -100 102 100 86 to specify 12 - -160 161,5 159 100 to specify 12 - -Note : dimensions are in mmtype F type FBDTG32-DISTANCE - technical data sheetelectrical wiring for contact gaugeslow action/magnetic contacts inductive...
  34. BDTGE18 - Stainless steel gasfilled thermometer every angle

    BDTGE18 - Stainless steel gasfilled thermometer every angle

    2 Pages

    En

    Here the first 2 pages from the catalogue "BDTGE18 - Stainless steel gasfilled thermometer every angle"

    P. 1

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com01/01/2006 rev 2119BDTGE182.1.2.temperature instrumentationBadotherm gasfilled model BDTGE18 series thermometer is available as 100/160mm. These gasfilled...

    P. 2

    operating detailsworking range temperature limitations___ bar maximum (without thermowell)pressure rating of stem25 bar maximum (without termowell)design informationingress protection designIP 54 per EN 60 529 / IEC 529 DIN 13 190IP 65 per EN 60 529 /...
  35. BDTG18-Distance - Stainless steel capillary thermometer

    BDTG18-Distance - Stainless steel capillary thermometer

    2 Pages

    En

    Here the first 2 pages from the catalogue "BDTG18-Distance - Stainless steel capillary thermometer"

    P. 1

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com01/01/2006 rev 2118BDTG18-DISTANCE2.1.2.stainless steel gasfilled capillary thermometerBadotherm gasfilled model BDTG18 series thermometer is available as100/160...

    P. 2

    operating detailsworking range temperature limitations___ bar maximum (without thermowell)pressure rating of stem25 bar maximum (without termowell)design informationingress protection designIP 54 per EN 60 529 / IEC 529 DIN 13 190IP 65 per EN 60 529 /...
  36. BDTG18 - Stainless steel gasfilled thermometer

    BDTG18 - Stainless steel gasfilled thermometer

    2 Pages

    En

    Here the first 2 pages from the catalogue "BDTG18 - Stainless steel gasfilled thermometer"

    P. 1

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com01/01/2006 rev 21172.1.2.temperature instrumentationBDTG18/ABDTG18/Dstainless steel gasfilled thermometerBadotherm gas filled model BDTG18 series thermometer...

    P. 2

    operating detailsworking range temperature limitations___ bar maximum (without thermowell)pressure rating of stem25 bar maximum (without termowell)design informationingress protection designIP 54 per EN 60 529 / IEC 529 DIN 13 190IP 65 per EN 60 529 /...
  37. BDT17-08 - Test pressure gauge 0.25%

    BDT17-08 - Test pressure gauge 0.25%

    2 Pages

    En

    Here the first 2 pages from the catalogue "BDT17-08 - Test pressure gauge 0.25%"

    P. 1

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com13/02/2006 rev 2-A69pressure instrumentationBDT17-08test pressure gauge 0.25%Badotherm model BDT17-08 series gauges are available as 160 mm dia.These gauges...

    P. 2

    pressure detailsworking pressurepressure elementtemperature detailstemperature limitationsdesign informationingress protection designIP 54 per EN 60 529 / IEC 529 EN 837-1drawingsBDT17-08 - technical data sheetprocess65 ºCambientstandard -40 ºC...
  38. BDT36-18 - All stainless steel contact pressure gauge

    BDT36-18 - All stainless steel contact pressure gauge

    2 Pages

    En

    Here the first 2 pages from the catalogue "BDT36-18 - All stainless steel contact pressure gauge"

    P. 1

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com29/01/2008 rev 2-B65pressure instrumentation1.1.4. BDT36-18contact all stainless steel pressure gaugeBadotherm model BDT36-18 series gauge is only available...

    P. 2

    pressure detailsworking pressurepressure element over-pressuretemperature detailstemperature limitationsThe variation of indication caused by the effects of temperatureshall not exceed :±0,04 x (ambient temperature-reference temperature)%of the spandesign...
  39. BDT34 - pressure gauge with built in microswitch

    BDT34 - pressure gauge with built in microswitch

    5 Pages

    En

    Here the first 5 pages from the catalogue "BDT34 - pressure gauge with built in microswitch"

    P. 1

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com15/06/2007 rev 2-B77pressure instrumentationBDT34pressure gauge with built in microswitchmounting variationstype A bottom connection, direct mountingtype B...

    P. 2

    BDT34 - technical data sheet77-1type A with cableBDT34-01type A with connectorsBDT34type ANote : dimensions are in mmpressure detailsworking pressure set pointpressure element over-pressuretemperature detailstemperature limitationsThe variation of indication...

    P. 3

    wiring BDT34 with SPST microswitchwiring BDT34 with SPDT microswitchBDT34 - technical data sheetwiring BDT34-01 with SPDT microswitch77-2

    P. 4

    BDT34-05, BDT34-06 - technical data sheet77-3type ABDT34-05type ABDT34-05type DBDT34-05Note : dimensions are in mmpressure detailsworking pressure set pointpressure element over-pressuretemperature detailstemperature limitationsThe variation of indication...

    P. 5

    BDT34-05, BDT34-06 - technical data sheetrising pressure falling pressurewiring detailswiring rating loadconnection detailswiringNCNOCearthjunction boxcontact no 1contact no 2contact no 3cablebrownblackblueyellow-greenvolt2201104824DC0,3A0,4A4A4AAC4A4A4A4Ainductive...
  40. BDT32-18 - All stainless steel gauge with build in contact

    BDT32-18 - All stainless steel gauge with build in contact

    2 Pages

    En

    Here the first 2 pages from the catalogue "BDT32-18 - All stainless steel gauge with build in contact"

    P. 1

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com29/01/2008 rev 2-Bcontact stainless steel pressure gaugeBadotherm model BDT32-18 series gauge is only available as 100/160 mmdia and has a contact built on...

    P. 2

    pressure detailsworking pressurepressure element over-pressuretemperature detailstemperature limitationsThe variation of indication caused by the effects of temperatureshall not exceed :±0,04 x (ambient temperature-reference temperature)%of the spandesign...
  41. BDT31-01 - Contact device with Makrolon hood

    BDT31-01 - Contact device with Makrolon hood

    1 Pages

    En

    Here the first 1 pages from the catalogue "BDT31-01 - Contact device with Makrolon hood"

    P. 1

    mounting variationstype A bottom connection, direct mountingtype B panel mounting, clamp fixing, back connectiontype C surface mounting, bottom connectiontype D back connection, direct mountingtype E panel mounting, back connectiontype F panel mounting,...
  42. BDT31 - Contact pressure gauge with Makrolon hood

    BDT31 - Contact pressure gauge with Makrolon hood

    2 Pages

    En

    Here the first 2 pages from the catalogue "BDT31 - Contact pressure gauge with Makrolon hood"

    P. 1

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com29/01/2008 rev 2-B1.1.4.63pressure instrumentationBDT31contact gauge with MAKROLON hoodBadotherm model BDT31 and BDT31-18 are special gauges with a build oncontact...

    P. 2

    pressure detailsworking pressurepressure element over-pressuretemperature detailstemperature limitationsThe variation of indication caused by the effects of temperatureshall not exceed :±0,04 x (ambient temperature-reference temperature)%of the spandesign...
  43. BDT30-18 - All stainless steel fillable contact gauge

    BDT30-18 - All stainless steel fillable contact gauge

    2 Pages

    En

    Here the first 2 pages from the catalogue "BDT30-18 - All stainless steel fillable contact gauge"

    P. 1

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com29/01/2008 rev 2-B61pressure instrumentation1.1.4.BDT30-18contact all stainless steel fillable pressure gaugeBadotherm model BDT30-18 series gauges are available...

    P. 2

    BDT30-18<100 barAISI316..100 barAISI316pressure detailsworking pressurepressure element over-pressuretemperature detailstemperature limitationsThe variation of indication caused by the effects of temperatureshall not exceed :±0,04 x (ambient temperature-reference...
  44. BDT13 - diaphragm differential pressure gauge

    BDT13 - diaphragm differential pressure gauge

    2 Pages

    En

    Here the first 2 pages from the catalogue "BDT13 - diaphragm differential pressure gauge"

    P. 1

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com20/01/2009 rev 2-B51pressure instrumentation1.1.2. BDT13stainless steel diaphragm differential gaugeBadotherm model BDT13 series gauges are available in bourdon...

    P. 2

    BDT13 - technical data sheettype A type ANote : dimensions are in mm* dimensions for BDT13-01pressure detailsworking pressure over-pressurepressure elementtemperature detailstemperature limitationsThe variation of indication caused by the effects of temperatureshall...
  45. BDT22 - All stainless steel slim bezel pressure gauge

    BDT22 - All stainless steel slim bezel pressure gauge

    2 Pages

    En

    Here the first 2 pages from the catalogue "BDT22 - All stainless steel slim bezel pressure gauge"

    P. 1

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com01/01/2006 rev 21.1.2.47pressure instrumentationBDT9-18stainless steel capsule pressure gaugeBadotherm model BDT9-18 series gauges are available as63/100/160...

    P. 2

    type A type D Ø 63 mm type D Ø 100/160 mmBDT9-18 - technical data sheetdimensionsns d d1 L H h weight63 68 63 42 88 63 0,18 kg100 110 100 49 142 82 0,53 kg160 160 149 50 200 84 1,02 kgNote : dimensions are in mmpressure detailsworking pressurepressure...
  46. BDT22 - All stainless steel slim bezel pressure gauge

    BDT22 - All stainless steel slim bezel pressure gauge

    2 Pages

    En

    Here the first 2 pages from the catalogue "BDT22 - All stainless steel slim bezel pressure gauge"

    P. 1

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com01/01/2006 rev 21.1.2.43pressure instrumentationBDT22stainless steel process pressure gaugeBadotherm model BDT22 series gauges are available in 100 and 160...

    P. 2

    BDT22 - technical data sheetdimensionsns d d1 L H h weight100 101,5 99 50 140 83 0,60 kg160 161 159 50 200 83 0,90 kgtype A type DNote : dimensions are in mmpressure detailsworking pressurepressure element over-pressuretemperature detailstemperature limitationsThe...
  47. BDT21 - Phenolic solid front pressure gauge

    BDT21 - Phenolic solid front pressure gauge

    2 Pages

    En

    Here the first 2 pages from the catalogue "BDT21 - Phenolic solid front pressure gauge"

    P. 1

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com01/01/2006 rev 2 pressure instrumentation1.1.2.40BDT21mounting variationstype A bottom connection, direct mountingtype B panel mounting, clamp fixing, back...

    P. 2

    BDT21 - technical data sheetdimensionsns d d1 L H h d2 d4 weight41/2” 148 129 86 180 130 137 6 0,8 kgNote : dimensions are in mmtype A type Dpressure detailsworking pressurepressure element over-pressuretemperature detailstemperature limitationsThe...
  48. BDT20-P - Overpressure protected stainless steel solid front gauge

    BDT20-P - Overpressure protected stainless steel solid front gauge

    2 Pages

    En

    Here the first 2 pages from the catalogue "BDT20-P - Overpressure protected stainless steel solid front gauge"

    P. 1

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com05/06/2008 rev 2-Bmounting variationstype A bottom connection, direct mountingtype B panel mounting, clamp fixing, back connectiontype C surface mounting,...

    P. 2

    BDT20-P - technical data sheetdimensionsns d d1 L H h weight100 110 100 63 142 100 0,65 kgNote : dimensions are in mmtype A type D Ø 100 mm onlypressure detailsworking pressure over-pressurepressure elementtemperature detailstemperature limitationsThe...
  49. BDT20 - All stainless steel solid front pressure gauge

    BDT20 - All stainless steel solid front pressure gauge

    2 Pages

    En

    Here the first 2 pages from the catalogue "BDT20 - All stainless steel solid front pressure gauge"

    P. 1

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com01/01/2006 rev 2mounting variationstype A bottom connection, direct mountingtype B panel mounting, clamp fixing, back connectiontype C surface mounting, bottom...

    P. 2

    BDT20 - technical data sheetdimensionsns d d1 L H h weight63 68 63 40 88 - 0,2 kg100 110 100 63 142 100 0,65 kg160 160 149 64 200 - 1,20 kgNote : dimensions are in mmtype A type D Ø 100 mm onlypressure detailsworking pressurepressure element over-pressuretemperature...
  50. BDT19 - All stainless steel reduced volume pressure gauge

    BDT19 - All stainless steel reduced volume pressure gauge

    2 Pages

    En

    Here the first 2 pages from the catalogue "BDT19 - All stainless steel reduced volume pressure gauge"

    P. 1

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com03/01/2008 rev 2-B pressure instrumentation1.1.2.42BDT19stainless steel pressure gauge reduced volumeBadotherm model BDT19 series gauge is only available as...

    P. 2

    pressure detailsworking pressurepressure element over-pressuretemperature detailstemperature limitationsThe variation of indication caused by the effects of temperatureshall not exceed :±0,04 x (ambient temperature-reference temperature)%of the spandesign...
  51. BDT18 - All stainless steel pressure gauge

    BDT18 - All stainless steel pressure gauge

    2 Pages

    En

    Here the first 2 pages from the catalogue "BDT18 - All stainless steel pressure gauge"

    P. 1

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com01/01/2006 rev 21.1.2.41pressure instrumentationBDT18stainless steel process pressure gaugeBadotherm model BDT18 series gauges are available as 50/63/80/100/160...

    P. 2

    type Apressure detailsworking pressurepressure element over-pressuretemperature detailstemperature limitationsThe variation of indication caused by the effects of temperatureshall not exceed :±0,04 x (ambient temperature-reference temperature)%of...
  52. BDT12 - All stainless steel diaphragm pressure gauge

    BDT12 - All stainless steel diaphragm pressure gauge

    2 Pages

    En

    Here the first 2 pages from the catalogue "BDT12 - All stainless steel diaphragm pressure gauge"

    P. 1

    For technical data sheets and dimensional drawings please refer to our website www.badotherm.com26/11/2008 rev 21.1.2.49pressure instrumentationBDT12stainless steel diaphragm pressure gaugeBadotherm model BDT12 series gauges are available in 100/160 mm...

    P. 2

    pressure detailsworking pressurepressure element over-pressuretemperature detailstemperature limitationsThe variation of indication caused by the effects of temperatureshall not exceed :±0,08 x (ambient temperature-reference temperature)%of the spandesign...

Archived catalogues

  1. commercial catalogue 2006/07

    commercial catalogue 2006/07

    324 Pages

    En

    Here the first 5 pages from the catalogue "commercial catalogue 2006/07"

    P. 1

    commercial catalogue >1 size="-1">

    P. 2

    2 >

    P. 3

    3 >

    P. 4

    mission statement >4 size="-1">

    P. 5

    Badotherm strives to be the no.1 brand name in theworld for high quality process instrumentation, by providing customer support with regional centresand mastering all stages in the process, from engineering to design to manufacturing. 5 >