Website:
Badotherm Group
Catalog excerpts
Badotherm a global commitment > 6 size="-1">
Open the catalog to page 6
United Kingdom Holland Rumania > 8 size="-1">
Open the catalog to page 8
/assembly units, worldwide process instrumentation > India 9 size="-2">
Open the catalog to page 9
1 pressure instrumentation > pressure instrumentationtemperature instrumentationchemical sealsmanifolds, valves and fittingslevel instruments 2temperature instrumentation 3chemical seals 4manifolds, valves and fittings 5level instruments 6 automotive and additional devices > 10 automotive and additional devices size="-2">
Open the catalog to page 10
pressure instrumentation
Open the catalog to page 11
pressure instrumentation all stainless steel safety pattern gaugeBDT20-63-100-16039 phenolic solid front turret gaugeBDT2140 all stainless steel process gaugeBDT18-63-80-100-16041 all stainless steel low volume gaugeBDT1942 all stainless steel slim casing gaugeBDT22-100-16043 gauge with seal combinations44-45 all stainless steel capsule gaugeBDT9-1847 capsule gauge with brass internalsBDT9-0848 diaphragm gaugeBDT1249 differential gauge bourdon tube systemBDT13-35050 differential gauge diaphragm systemBDT13-36051 industrial heavy duty gauge with brass internalsBDT1-100-16052 glycerine...
Open the catalog to page 12
pressure instrumentation range from 1 bar up to 400 barBDT36187range from 2.5 bar up to 400 barBDT36388 > range from 10 mbar up to 1 barBDT44389 range from 40 mbar up to 40 barBDT43190 range from 40 bar up to 600 barBDT43391 range from 40 bar up to 600 barBDT43592 range from 400 bar up to 2200 barBDT43493 range from 1 bar up to 400 barBDT53194 range from -1...0 bar up to 25 barBDT431i95 range from 40 bar up to 600 barBDT433i95 range from 100 mbar up to 25 barBDT731i95 > range from 100 mbar up to 40 barBDT73198 range from 1 MWG up to 160 MWGBDT70599 range from 1 MWG up to 160 MWGBDT707100...
Open the catalog to page 13
1.1.1. pressure instrumentation Dear customer,The Badotherm programme summarized in this catalogue,shows standard versions with main technical data and is subject to a continuous quality and product improvement. Badotherm reserves the right to change all specifications, such as executions, weights, dimensions, capacities, prices, colors and other data contained in this catalogue, without prior notice.All Badotherm products delivered are subject to ourStandard Conditions of Sale.Our complete programma including latest technical datasheets and Conditions of Sale are available on our website...
Open the catalog to page 14
For technical data sheets and dimensional drawings please refer to our website www .badotherm.com 01/01/2006 rev 2 >
Open the catalog to page 15
pressure instrumentation For technical data sheets and dimensional drawings please refer to our website www .badotherm.com 01/01/2006 rev 2 >
Open the catalog to page 16
pressure instrumentation For technical data sheets and dimensional drawings please refer to our website www .badotherm.com 01/01/2006 rev 2 >
Open the catalog to page 20
Badotherm instrumentation is tested and manufactured under Badotherm and ISO9000 standardsand comply with the following. > pressure instrumentation All Badotherm gauges are in accordance with the EUROPEAN STANDARD EN837-1-2-3 EN837-1 (part 1) - bourdon tube pressure gauge dimensions, metrology requirements and testing. EN837-2 (part 2) - selection and installation recommendations for pressure gauges. EN837-3 (part 3) - diaphragm and capsule gauge dimensions, metrology, requirements and testing. For more details see page 23 testing acc EN837. > All Badotherm gauge accuracy classes are...
Open the catalog to page 22
When a gauge is tested for accuracy and hysteresis, test instruments with an accuracy of at least 4 times greater than the accuracy of the instrument to be tested, shall be required. The test instrument shall be traceable to national or international standards.The test shall be made by rising and falling pressure. The number of test points shall be evenly dis-tributed on the entire scale. The maximum scale value is a test point and the zero (free zero only) is a test point. - classes 0.1% up to 0.6% a minimum of 10 points.- classes 1% up to 2.5% a minimum of 5 points.Standard gauges may be...
Open the catalog to page 23
pressure instrumentation For technical data sheets and dimensional drawings please refer to our website www .badotherm.com 01/01/2006 rev 2 >
Open the catalog to page 24
For technical data sheets and dimensional drawings please refer to our website www .badotherm.com 01/01/2006 rev 2 >
Open the catalog to page 25
pressure instrumentation For technical data sheets and dimensional drawings please refer to our website www .badotherm.com 01/01/2006 rev 2 >
Open the catalog to page 26
pressure instrumentation For technical data sheets and dimensional drawings please refer to our website www .badotherm.com 01/01/2006 rev 2 >
Open the catalog to page 27
applications > Badotherm contacts are used on diameter 100/160 mm. The contacts are available in single,double and triple versions and can be built under or on to the dial.The nominal value can be set from the outside covering the full scale and the switching direction is clockwise. pressure instrumentation technical specification contact devicesS-type: low-action contacts > Low action contacts are suitable for use when there is no high contact loads and vibration.These contacts are not suitable for use in heavy duty operation, aggressive environment and oilfilled gauges. A pulse controlled...
Open the catalog to page 29
pressure instrumentation For technical data sheets and dimensional drawings please refer to our website www .badotherm.com 01/01/2006 rev 2 >
Open the catalog to page 33
pressure instrumentation For technical data sheets and dimensional drawings please refer to our website www .badotherm.com 01/01/2006 rev 2 >
Open the catalog to page 34
MSR 020 pressure instrumentation multifunctional relaysingle low action example of connection multifunctional relaydouble low actionmultifunctional relaydouble low action > 1235-40 V DC pulsespulse/pause ratio0,5 ms +/- 20%edge steepness/= approx. 120 Vֵs \= approx. 20 Vֵs > MSR01012-134700 Ohm, 47nF for 115 VAC and 230V AC; 2200 Ohm for 24 V AC and 24 V DCMSR01112-134700 Ohm, 47nF for 115 VAC and 230V AC; 2200 Ohm for 24 V AC and 24 V DC MSR01112-112000 Ohm, 47 nF for all supply voltages MSR020 (contact I)12-134700 Ohm, 47nF for 115 VAC and 230V AC; 2000 Ohm for 24 V AC and 24 V DC MSR020...
Open the catalog to page 35All Badotherm Group catalogs and technical brochures
-
DLD Diaphragm Leak Detection2 Pages
-
TC Temperature Compensator2 Pages
-
US FH3 Pages
-
BRC3 Pages
-
EXT3 Pages
-
BC4 Pages
-
Thermowells14 Pages
