Tooling Product Guide
1 / 41Páginas

Product Guide HORIZONTAL HANDSAW MACHINE ACCESSORIES SPINDLE TOOLING

Fast Tap Tooling Accessories Manual Horizontal Bandsaw Machine Hydraulic Vice A-Type Vice K-Type Vice Semi-Universal Dividing Head Rotary Table Millstar Digital Readout Halogen Worklights, Air Power Drawbar, & Align Powerfeed Units Right Angle & Horizontal Milling Attachments Bison Toolpost Bison Toolpost Spares Adjustable Spindle Backstop Lathe Centres Bison Lathe Chucks Chuck Soft Jaws SPINDLE TOOLING & ASSOCIATED 21 ER Collet Chuck System - Boxed Sets ER Collet Chuck System - Holders ER Collet Chuck System - Collets & Spares OZ Collet Chuck System - Collets & Spares Centreline Speed...

FAST TAP MACHINES FAST TAP 1000, 800, 400 200 & 90 Produces high quality threads Ideal for blind and through holes Can be used by unskilled labour Tap breakage drastically reduced Conventional taps or roll taps Free up your CNC machines Taps any material No indexing or moving workpieces Each machine comes complete and ready for operation with: Parallel arm for vertical tapping with 48” (1200mm) reach Air preparation unit with mist lubricator, Water trap, pressure gauge and regulator Air driven reversible tapping motor Quick change tapholder (Bilz style) Exhaust noise muffler A range of five...

Torque limiting tap chucks for Fast Tap FAST TAP CHUCKS Fast Tap uses the widely available Bilz style clutch driven tap chucks M7-M24 (ISO Taps) and M8-M24 (DIN Taps) Reducer allows smaller taps to be used on Fast Tap 200 and Fast Tap 90 Size 0 M1-M8 (ISO Taps) and M1-M10 (DIN Taps) Size 1 M3-M14 (ISO Taps) and M3-M14 (DIN Taps) Pin wrenches for torque adjustment XYZ Part No. Optional Accessories Part numbers refer to ISO shanks (DIN shank chucks on request) For ISO & DIN Chuck and Tap Size Chart refer to page 40 Horizontal motor bracket for 1000, 800 & 400 Horizontal motor bracket for 200...

MANUAL HORIZONTAL BANDSAW One bimetal blade fitted to machine Automatic blade stop at end of cut Rugged vertical blade guide arms carrying tungsten carbide faced blade guides and roller bearings for optimum squareness of cut Efficient coolant system with built-in tank and pump, supplies coolant directly onto blade, to each guide arm CE equipped with positive mode Interlocks on drum covers Quick acting vice, with 90° to 45° mitreing Low voltage control with overload protection for motor Hydraulic control of downfeed rate Control panel conveniently placed on top of bow Moveable material...

WORKHOLDING 6” HYDRAULIC MACHINE VICE (12” Opening) Rugged construction Body is made of high quality ductile cast iron for extra rigidity Sliding bedways flame hardened and ground Concealed spindle for extra protection Hydra booster system for extra clamping pressure Quick action clamping Swivel base Draw down jaws

WORKHOLDING cont’d 6” A-TYPE MACHINE VICE High grade iron vice body Low overall height Adjustable positioner Moving jaw runs in long prismatic slides with provision for new adjustment Hardened and ground steel jaw plates Enclosed ACME screw with phosphor bronze nut Optional swivel base Drop forged handle Leadscrew protected against dirt and swarf Dimensions Width of jaws Overall size of base Overall height Clamp bolt centres Weight Swivel base for above

WORKHOLDING cont’d K-TYPE MACHINE VICE Body and moveable jaw made of close grained high tensile iron castings Built for heavy duty machining with retained accuracy Jaw plates of hardened and ground tool steel

WORKHOLDING cont’d 52 PIECE STEEL CLAMPING KITS (For King Rich mills, Mini Mills & VMC’s) Heat treated steel black oxide finish. Block size 25mm. Set in rack consists of: 24 pcs Stud (75, 100, 125, 150, 175 and 200mm) 6 pcs T-nuts 4 pcs Coupling nuts 6 pcs Flange nuts 6 pcs Step clamps 6 pcs Step blocks Can be wall mounted for tidy and compact storage 52 piece steel clamping kit (for 16mm slots) M12 studs 52 piece steel clamping kit (for 18mm slots) M16 studs

WORKHOLDING cont’d SEMI-UNIVERSAL DIVIDING HEAD (includes chuck and tailstock) Dividing heads can divide in any angle by direct, indirect, or differential methods. The ratio between the worm and the worm gear is 40:1. Hardened and ground spindle is rigidly held in a taper roller bearing. Worm is hardened and ground. The swivel head can be locked in any angle from 10° below horizontal to 90° vertical. Precision fitting to base assures smooth rotation. All models have threaded spindle nose and 24 hole dividing plate with easy conversion to fast direct indexing on numbers 2, 3, 4, 6, 8, 12 and...

WORKHOLDING cont’d HORIZONTAL / VERTICAL ROTARY TABLE Table is made of high density Meehanite grade iron. Worm is hardened and ground. Ratio of 90:1. Work table is graduated a full 360° so one turn of handle move table 4°. Micro collar graduated in steps of 1' min. Vernier scale makes quick settings. Excellent performance, practical design and reasonable cost Perfect for circular work, angle setting, boring, spot facing etc. Testing objective Variation-maximum tested Flatness of clamping surface (Concave) Parallelism of clamping surface to base Squareness of clamping surface True running of...

MACHINE ACCESSORIES MILL STAR DIGITAL READOUT KIT Included in the kit: cast arm, 3 sized adjustable quill brackets, bolts, fitted digital scale, battery and instructions. Travel: 153mm (6”) Resolution: 0.01mm (0.0005”) LCD Display: 10mm character height Battery: 1.5V SR44 Working temperature: 0 - +40°C Mill Star digital readout kit offers an easy fitment to some of the most common machine quills, including the Bridgeport vertical milling machines. The kit is supplied with several different fittings and instructions, allowing for a quick installation. The Mill Star is constructed from a...

MACHINE ACCESSORIES HALOGEN WORK LIGHTS Dust proof luminaire head Articulated arm 190 x 280mm Universal base Halogen Worklight - 110 VOLT ( For VL / SLX lathes) Halogen Worklight - 110 VOLT ( For VM / SMX Bed Mills) Halogen Worklight - 24 VOLT 70W ( For SM / SMX Turret Mills) Halogen Worklight Extended Arm - 24 VOLT 70W AIR POWERED DRAWBARS Suits all turret mills. Available for R8, ISO 30, ISO 40 spindles. High torque air motors. Complete with air regulators Increase productivity with only 5 seconds tool change. ELECTRONIC POWER FEED UNITS FOR MANUAL MILLING MACHINES Electronic variable...