Catálogos >
Xylem Analytics Germany Sales GmbH & Co. KG. >
New: CHEMtrac 840M Ball valve armatures

New: CHEMtrac 840M Ball valve armatures
1 / 3Páginas

Excertos do catálogo

New: CHEMtrac 840M Ball valve armatures - 1

New: CHEMtrac 840M Ball valve armatures The CHEMtrac 840M is a manually driven retractable holder made from stainless steel to install Pg 13.5 Ø12 mm sensors in tanks or pipelines. The advantages: • ew manual replacement fitting series with a N mechanical linear drive for the safe retraction and extension of the sensor without interrupting the process • ustomizable to application conditions C with multiple process connection, cleaning connection, and seal material options • o special sensors necessary. Designed N for low maintenance electrodes with an installation length of 120 mm, a diameter of 12 mm and Pg 13.5 thread • ighest possible safety: H b. The sensor is locked tightly in this position and cannot be removed measuring position is reached, the bayonet lock is activated c. hen removing the sensor from the W process, the bayonet fitting must be unlocked. This requires a short movement into the direction of the process. If the process pressure is still applied, the bayonet lock cannot be opened. Therefore, the process pressure must be reduced in order to remove the sensor. Bayonet lock Installation lever Ball valve Rinsing chamber Process connection Immersion pipe with protective bas

Abrir o catálogo na página 1

New: CHEMtrac 840M Ball valve armatures - 2

CHEMtrac 840M CHEMtrac Type configu840M rator: manual retractable holder with ball valve Code Material (wetted parts) Stainless Steel 1.4404 / 316L 44 XXXX special Code E V F XXX Sealing Material (wetted sealings) EPDM FPM (Viton®) FFKM (Kalrez®) special Code 3 7 XX Immersion length (nominal) 300 mm 700 mm special Code Sensor Type 120 120mm - Sensor PG13,5 XXX Special Option Code FD32O FD32B FA14O FA14B G14MO G14FB N14MO XXXXX Process Connection Flange DN32 PN16 without ball valve Flange DN32 PN16 with ball valve Flange ANSI 1 1/4" without ball valve Flange ANSI 1 1/4" with ball valve...

Abrir o catálogo na página 2