091
1 / 6Páginas

Excertos do catálogo

Stainless steel valve with bellows for harsh process conditions Suitable for 1 bar differential pressure Very easy maintenance thanks to simple wedge design Body material stainless steel Manual actuator with position indicator: 091 . . -. E08 Pneumatic actuator double acting without position indicator without solenoid with position indicator, without solenoid: 091 . . -. E24 with position indicator, with solenoid: 091 . . -. E44

Abrir o catálogo na página 1

Sealing materials Feedth rough 1 valve gate 3 gate seal V valve seat side 2 sliding elements 4 bellows Very robust design with wedge sealing system No grease and no moving parts in the vacuum Technical data Continued next page Depending on the process conditions shorter service Maximum values: depending on operating conditions Leak rate: - Valve seat Pressure range Differential pressure on the gate Differential pressure at opening Bellows feedthrough Cycles until first service - Valve body - Manual and pneumatic actuator - Position indicator - Valve body - Valve gate - Small parts...

Abrir o catálogo na página 2

Solenoid for impulse actuation Solenoid separate, for external mounting Bake-out jacket (picture 1) Shaft feedthrough with PTFE bellows (instead of metal bellows feedthrough) Ports (diagram 2) for roughing (by-pass), venting or for gauges Ordering information for options: Ordering No. of valve-X (e. g. 09140-PE44-X, X = port ISO-KF25 in position B) Technical data

Abrir o catálogo na página 3

Main dimensions Valve with manual actuator V valve seat side © compressed air connection % required for dismantling © position indicator © electrical connection © leak detection hole Valve with pneumatic actuator Flange dimensions see pages 28 + 29

Abrir o catálogo na página 4