Catálogos >
A. u. K. Müller >
01.010.325 Servo-controlled solenoid valve NC, DN 10

01.010.325 Servo-controlled solenoid valve NC, DN 10
1 / 2Páginas

Excertos do catálogo

01.010.325 Servo-controlled solenoid valve NC, DN 10 - 1

Product Information Servo-controlled solenoid valve NC, DN 10 A.u.K. Müller Solenoid valves Control valves Special valves and systems A. u. K. Müller GmbH & Co. KG Dresdener Str. 162 D-40595 Düsseldorf/Germany e-mail: info@akmueller.de Internet: www.akmueller.de Characteristics servo-controlled normally closed (NC) solenoid replaceable while medium circuit remains untouched, solenoid rotatable 4x90° suitable for hot water up to 90 °C similar performance for alternating or direct current long term performance capability optimized water hammer characteristic by low noise emission according to EN 60730 high operating safety by the use of high quality materials and 100% final testing of the products Applications steam appliances dental appliances hot / cold drink dispensers industrial appliances air conditioning agricultural implements pollution equipment temperature equalisers dish washers ice machines washing machines water treatment Description 2/2-way solenoid valve of nominal diameter DN 10 for use with cold and heated potable water and physically and chemically similar media. The valve is servo-controlled and normally closed (NC). Valves of this design are three-chamber straigth valves and can be manufactured with various connections. Coil systems for common voltage and frequency ranges are available. Electrical operating safety is achieved by insulation class F and can be supported by an integrated protective circuit. typical performance curve 60 By using high quality insulation materials, continuous duty (100 % ED) at higher medium temperatures is possible. The glass fibre reinforced polyamide valve body persists hot water. Protection against corrosion of inner parts exposed to the medium is achieved by using stainless steel. p / bar © copyright A.u.K. Müller, technical changes reserved

Abrir o catálogo na página 1

01.010.325 Servo-controlled solenoid valve NC, DN 10 - 2

Product Information Servo-controlled solenoid valve NC, DN 10 Technical Data Type Fitting position any, preferably with coil upwardly cold and heated potable water and physically and chemically similar media Flow regulator Pressure surge Coil type 2/2-way 3 chamber straight valve, servo-controlled solenoid valve other voltages on request Voltage tolerance +10% -15% Duty cycle Valve body Plunger guide stainless steel EPDM NBR (on request) VMQ (on request) Coil coating PBT,PET or epoxy resin POM (in inlet) stainless steel on request Insulation class *John Guest cartridge in valve body 2...

Abrir o catálogo na página 2