
Grupo: Tsubaki

Excertos do catálogo

ROLLER-, ATTACHMENT- AND CONVEYOR CHAIN
Abrir o catálogo na página 1
LEADING PRODUCTS AND EXCELLENT SERVICE At TSUBAKI we know that customers want the best. We are also aware that each and every one of our customers has unique requirements. Therefore, we take pride in our ability to deliver an extensive product line-up that satisfies these high expectations. We believe that in coming years there will be an increase in demand for quality in products as well as in services. With an eye on these future trends, we are committed to take on the challenge of technical innovation. Key products such as BS/DIN, ANSI drive chains, small pitch attachment and large pitch...
Abrir o catálogo na página 2
TABLE OF CONTENTS Roller Chain Introduction to TSUBAKI Roller Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Ordering TSUBAKI Roller Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Cutting TSUBAKI Roller Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Connecting TSUBAKI Roller Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Abrir o catálogo na página 3
TABLE OF CONTENTS Conveyer Chain Introduction to TSUBAKI Conveyor Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Ordering TSUBAKI Conveyor Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Cutting TSUBAKI Conveyor Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Connecting TSUBAKI Conveyor Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Abrir o catálogo na página 4
1. INTRODUCTION TO TSUBAKI ROLLER CHAIN ISO min. Tensile Strength TSUBAKI min. Tensile Strength TSUBAKI av. Tensile Strength 3. Average Tensile Strength as per TSUBAKI Standardisation This is a fracture load reading obtained after a long period of actual tensile strength testing of a large number of chain strands. Of course, when any given strand of roller chain fractures, this value may be higher or lower, so it does not represent a guaranteed value. 2. Minimum Tensile Strength as per TSUBAKI Standardisation This is a minimum value determined by statistical processes at TSUBAKI. If a...
Abrir o catálogo na página 5
1. INTRODUCTION TO TSUBAKI ROLLER CHAIN 7. Ball Drifting Process Shot Peening increases resistance to: • fatigue failure • corrosion fatigue • hydrogen assisted cracking • cavitation erosion • stress corrosion cracking • galling • fretting Ball Drifting Repetitive load Residual compressive stress Repetitive load Residual Compressive Stress Ball drifting is the process of pressing a hardened steel ball through a hole in an already hardened steel plate. The goal of this process is to create local plastic deformation and effectively add compressive stress to the walls of the hole. Besides...
Abrir o catálogo na página 6
1. INTRODUCTION TO TSUBAKI ROLLER CHAIN Roller Chain Structure Roller Chain Structure 1. Three Basic Dimensions Pitch, Roller Diameter and Inner Width are known as the “Three Basic Dimensions of Roller Chain.” When these three dimensions are identical, roller chains and sprockets are dimensionally compatible. 2. Basic Parts Link Plate The plate is the component that bears the tension placed on the chain. Usually this is a repeated loading, sometimes accom panied by shock. Therefore, the plate must not only have great static tensile strength, it must also hold up to the dynamic forces of...
Abrir o catálogo na página 7
Spring Clip Connecting Link Cotter Pin Connecting Link Spring Pin Connecting Link Cotter Pin Connecting Link Multi-Strand (2-strand shown) Intermediate Plate(s) Link Plate Pin Link and Intermediate Plate The pin link consists of two pins that have been press fit into two pin link plates. In case of multi-strand roller chain up till size 08B, an intermediate plate is added to the pin link. In case of multistrand roller chain above size 08B, two intermediate plates are added to the pin link. The intermediate plates are slip fit for standard roller chain and press fit for SUPER roller...
Abrir o catálogo na página 8
1. INTRODUCTION TO TSUBAKI ROLLER CHAIN ONE Pitch Offset Link (OL) Single Strand TWO Pitch Offset Links (2POL) Single Strand Offset Link Plate Pin Offset Links An offset link is used when an odd number of chain links is required. Different types are available: One pitch offset link (OL) The pin and two plates are slip fit. The maximum allowable load is 35% (applicable to ANSI chain) lower than the chain itself. Two pitch offset link (2POL) Two pitch offset links are the combination of a roller link and an offset link connected with a rivet pin. The maximum allowable load for ANSI chain is...
Abrir o catálogo na página 9
2. ORDERING TSUBAKI ROLLER CHAIN When ordering TSUBAKI roller chain, please specify the chain size and material as well as the chain length and the installation position. For product codes and specifications, see the model identification examples below and dimension tables in Catalogue 1, Drive Chain. With the exception of application specific chain, TSUBAKI roller chain is stocked by unit. The standard unit length for BS/DIN chain is 5 meter, while the standard unit length for ANSI chain is 3.05 meter (10 feet). The total length of each unit includes one connecting link. Please purchase...
Abrir o catálogo na página 10
2. ORDERING TSUBAKI ROLLER CHAIN 2.2 Specific Ordering Procedure for Chain Length with an even Number of Links A connecting link is supplied on one end of each unit and an inner link is supplied on the other end. (a) Example of 8 links RS12B-1 including the connecting link (b) Example of 20 links riveted endless chain RS50-1 (please specify “rivet endless”). There will be no CL supplied in this case. Specific Ordering Procedure for Chain Length with an odd Number of Links Please always specify the formation. Be careful with chain types for which there are no OL’s. In case of an unspecified...
Abrir o catálogo na página 11Todos os catálogos e folhetos técnicos Tsubakimoto Chain
-
TSUBAKI DIRVE CHAINS & SPROCKETS
234 Páginas
-
Overload protection and control devices
184 Páginas
-
TIMING beltand pulleys
72 Páginas
-
REDUCER FOR SERVO MOTORS TERVO
42 Páginas
-
TSUBAKI COUPLINGS
120 Páginas
-
Tsubaki Miter Gear Box
64 Páginas
-
Tsubaki Troi Drive and Worm Power Drive
262 Páginas
-
Drive Chains & Sprockets
219 Páginas
-
Power Cylinder Linipower & Linispeed Jack
316 Páginas
-
Cam Clutch BR-HT Series
8 Páginas
-
Tsubaki Couplings
120 Páginas
-
Tsubaki Large Pin Gear Drive Units
2 Páginas
-
Tsubaki Lambda Chain Leaflet
6 Páginas
-
Tsubaki BR-HT Series Cam Clutch
8 Páginas
-
Tsubaki Plastic Block Chain RSP80
2 Páginas
-
Tsubaki Pin Gear Drive Units
6 Páginas
-
Tsubaki Bearing Roller Conveyor Chain
24 Páginas
-
Tsubaki gear motors 40 W - 5.5 kW
268 Páginas
-
Driving the World...and the Future
2 Páginas
-
Tsubaki BS-F Series Backstop Cam Clutch
12 Páginas
-
Titan Series Chain
4 Páginas
-
Heavy Duty Drive Chains & Sprockets G8
24 Páginas
-
Tsubaki Drive Chain (for EMEA market)
54 Páginas
-
Tsubaki Surface Treated Neptune Chain
16 Páginas
-
TRAXLINE Cables for Motion
88 Páginas
-
Tsubaki SB Series Shock Relay
8 Páginas
-
Power-Lock
88 Páginas
-
Tsubaki BS Roller Chain GT4 Winner
6 Páginas
-
Tsubaki 2013 Forestry Products Catalogue
57 Páginas
-
SJ3 Sealed Joint Technology
2 Páginas
-
Iron Hawk Center Pull Miner Chain
2 Páginas
-
TKA Series Plastic Cable Carrier
21 Páginas
-
Tsubaki Wear Indicator Sprockets
4 Páginas
-
Tsubaki Smart Tooth
2 Páginas
-
Tsubaki Products for the Food Industry
32 Páginas
-
Tsubaki Cam Clutch Box Series
16 Páginas
-
Tsubaki Cam Clutch
92 Páginas
-
Tsubaki Pin Oven Chain
4 Páginas
-
Top Chain Engineering Manual
76 Páginas
-
Tsubaki Pin Gear Drive Units
16 Páginas
-
Tsubaki Motorcycle Chain Road Series
6 Páginas
-
Tsubaki Cleanveyor
12 Páginas
-
Tsubaki Gripper Chain
6 Páginas
-
Tsubaki Top Chain
246 Páginas
-
Tsubaki Small Size Conveyor Chains
168 Páginas
-
Tsubaki Palm Oil Mill Products
6 Páginas
-
Tsubaki Palm Oil Mill Chain
2 Páginas
-
Tsubaki Integrated Attachment Chains
48 Páginas
-
Tsubaki Custom Made Chain
90 Páginas
-
Tsubaki PC Chain Brochure
12 Páginas
-
Tsubaki Lambda Lube Free Chain Brochure
16 Páginas
-
Tsubaki Gripper Chain Brochure
2 Páginas
-
Tsubaki BS/DIN GT4 Winner Brochure
6 Páginas
Catálogos arquivados
-
ZIP CHAIN ACTUATOR
56 Páginas