Catálogos >
Trafag AG sensors & controls >
Display Temperature Switch DTP 8180

Display Temperature Switch DTP 8180
1 / 9Páginas

Excertos do catálogo

TEMPERATURE SWITCH Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of pressure and temperature. Applications Features ■ machine tools ■ hydraulic power units ■ cooling and lubrication systems ■ hvac ■ process technology ■ parameterization also via NFc-smartphone App (Android) ■ Display and electrical connection are independently rotatable 3357343° ■ Analogue output switchable mA or V ■ integrated datalogger ■ Temperature measuring range adjustable, 50 ... 100 % of the nominal range Subject to change Data sheet H72352a 09/2018 trcifciq sensors controls

Abrir o catálogo na página 1

Operating Measuring range temperature -50oc ... +i50°c (-58°f ... 302°F) media Sensor Sensor DIN EN 60751, class 1, wetted parts 1.4404 (AiSi316L) Sensor DiN EN 60751, class 1, wetted parts 1.4404 (AIsI316L), shorter response time 11 Process see table below "Ordering no. for process connections” connections Electrical Male electrical plug M 12x1,4-pole, Mat. PA (Accessories P3, P4) connection Male electrical plug M 12x1,5-pole, Mat. PA (Accessories P1, P2) Output Switching output PNP, current output 4 ... 20 mA; output detail see accessories P1, P2, P3 signal Switching...

Abrir o catálogo na página 2

Customer adjustment (accessory ZC) Name Standard setting Value range Short Switch point SP1 (hysteresis mode) 75 % Measuring Upper switch point FH1 (window mode) range Reset point Rp1 (hysteresis mode) 25 % measuring Lower switch point FL1 (window mode) range switch point sP2 (hysteresis mode) 75 % measuring upper switch point FH2 (window mode) range reset point RP2 (hysteresis mode) 25 % measuring Lower switch point FL2 (window mode) range switch point delay time sP1 0 (hysteresis mode) switch point delay time FH1 (window mode) switch point delay time RP1 0 0 ......

Abrir o catálogo na página 3

trofaq sensors ^^controls

Abrir o catálogo na página 4

Analogue output Current limiting output signal 4 ... 20 mA: 25 mA (overload) 0 ... 10 VDc: < 40 mA (short-circuit) Damping (rise time) 0.01 ... 3.00 s / 10 ... 90 % Nominal temperature trofaq sensors ^^controls

Abrir o catálogo na página 5

Dimensions Standard process connection DTP 8180 H72352a page 6/9 trofaq sensors ^^controls

Abrir o catálogo na página 6

Adjustable process connections Tri-Clamp Process connections 8180.XX.XX1G/2G/3G/4G/5G.XX... H72352a page 7/9 trofaq sensors ^^controls

Abrir o catálogo na página 7

Sanitary fitting Functions switching output Hysteresis

Abrir o catálogo na página 8

DTP 8180 Electrical connection Protection / electrical connection IP65*) M12x1 Output signal 8180.xx.xxxx.xx.PA/PU/PV/PW/PS *) Provided female connector is mounted according to instructions ***) The use of a shielded cable is recommended 4...20mA: min./max resistor vs. supply voltage @ Pmax = 100% 1200 1000 Customer Load Resistor (Ohm) Connection of loads to switching output Customer Supply Voltage (V) Additional information Documents Data sheet Instructions Flyer

Abrir o catálogo na página 9