Catálogos >
TOPWAY LCD >
HKT043ATA-1C

HKT043ATA-1C
1 / 12Páginas

Excertos do catálogo

HKT043ATA-1C LCD Module User Manual Release Date - Preliminary Draft release - Assemble Precaution Document Name: HKT043ATA-1C Page: 1 of 11

Abrir o catálogo na página 1

LCD Module User Manual Document Name: HKT043ATA-1C Page: 2 of 11

Abrir o catálogo na página 2

LCD Module User Manual 1 Basic Specification TOPWAY HKT043ATA-1C is a Smart TFT Module with 32bit MCU on board. Its graphics engine provides numbers of outstanding features. It supports TOPWAY TML 3.0(Editor 2017) for preload and pre-design display interface that simplify the host operation and development time. Suitable for industry control, instrumentation, medical electronics, power electric equipment applications. General Specification Screen Size(Diagonal) : Resolution : Color Depth : Pixel Configuration : Display Mode : Viewing Direction : Outline Dimension : Active Area : Backlight :...

Abrir o catálogo na página 3

LCD Module User Manual Terminal Function UART Interface Terminal (K1) Descriptions Power supply Data Input Data output Request To Send (function as busy BUSY signal) 1：Busy；0：No busy NO Connect, leave open Ground, (0V) Note. *1. User data and commands transfer through this terminal *2. HW hand shake is suggested Power output USB DATA negative signal USB DATA positive signal No connection, leave open Ground, (0V) Note. *1. TML files and image files preload through this terminal Document Name: HKT043ATA-1C Page: 4 of

Abrir o catálogo na página 4

LCD Module User Manual 2 Absolute Maximum Ratings Items Power Supply voltage Operating Temperature Storage Temperature Condition No Condensation No Condensation Note: *1. This rating applies to all parts of the module and should not be exceeded. *2. The operating temperature only guarantees operation of the circuit. The contrast, response speed, and the other specification related to electro-optical display quality is determined at the room temperature, TOP=25℃ *3. Ambient temperature when the backlight is lit (reference value) *4. Any Stresses exceeding the Absolute Maximum Ratings may...

Abrir o catálogo na página 5

LCD Module User Manual Basic Operation Function Descriptions HKT043ATA-1C TML files Picture files ICONS files UART interface Custom Memories Touch Panel VP variables Control and Draw Engine TML files, Picture files, ICON files are stored inside FLASH memory area. They are preloaded to HKT043ATA-1C for stand alone interface use. Those files are preloaded via USB interface as an USB drive. All the interface flow and the touch response are based on the preloaded TML files VP variables memory is inside RAM area, it provides real time access via UART by the HOST or display onto the TFT by TML...

Abrir o catálogo na página 6

LCD Module User Manual Quick Start Guide Install TOPWAY Graphics Editor Import pictures 2. design UI flow Connect to host Show 5. real time data 4.3 Command Descriptions Please refer to “SMART LCD Command Manual”. Document Name: HKT043ATA-1C Page: 7 of 1

Abrir o catálogo na página 7

LCD Module User Manual 5 Optical Characteristics Item View Angles Contrast Ratio Response Time TOFF White Blue Uniformity NTSC Luminance 1.IF= 40 mA, and the ambient temperature is 25℃. 2. The test systems refer to Note 1 and Note 2.

Abrir o catálogo na página 8

LCD Module User Manual Note 1: The data are measured after LEDs are turned on for 5 minutes. LCM displays full white. The brightness is the average value of 9 measured spots. Measurement equipment SR-3A (1°) Measuring condition: - Measuring surroundings: Dark room - Measuring temperature: Ta=25℃. - Adjust operating voltage to get optimum contrast at the center of the display. Note 3: The definition of contrast ratio (Test LCM using SR-3A (1°)): Luminance When LCD is at “White” state Contrast = Ratio(CR) Luminance When LCD is at “Black” state (Contrast Ratio is measured in optimum common...

Abrir o catálogo na página 9

LCD Module User Manual 6 Precautions of using LCD Modules Please refer to "LCD-Module-Design-Handling-Precaution.pdf". 7 . Assemble Precaution 安装注意事项 1. Customer front panel opening and thickness for TOPWAY display module should be fit for its assembling and sealing.  The suggested assemble gap(A) should be about 0.3~0.5mm on each side.  The suggested front panel thickness(B) should be about 1.5~4.0mm. 客户面板开窗及厚度应适合 TOPWAY 显示模块的安装及密封. · 建议每边安装间隙(A)约为 0.3 ~0.5mm. · 建议面板厚度(B) 约为 1.5~4.0mm. 2. A silicon sealing ring ships with TOPWAY display module. It should be in place before assembling to...

Abrir o catálogo na página 10

LCD Module User Manual 5. Others:  Never hot plug the device! Power off the device before connect or disconnect the display module.  Don't forget to remove the cover protective film for normal operation. 其它: · 视频线禁止带电插拔！在连接或断开显示模块之前先关闭设备电源. · 使用前请揭去

Abrir o catálogo na página 11

HKT043ATA-1C 1 / 12Páginas

Excertos do catálogo

Todos os catálogos e folhetos técnicos TOPWAY LCD

HKT043ATA-1C
1 / 12Páginas