TMF1521
1 / 2Páginas

Excertos do catálogo

The TMF1521 is an autonomous frequency reference very high precision and very low phase noise. It comes in 1U 19 ''rack. KEY FEATURES The TMF1521 is used when an autonomous source of stable and accurate frequency is needed. If a fine adjustment is needed, a potentiometer on the front panel of the rack allows this type of operation on the oscillator. All the outputs are located on the rear face of the equipment. There is a choice between 6 or 12 outputs.10 MHz sine outputs or 5 MHz and BNC or SMA outputs. A standard CEE power supply connector for 230 VAC power supply is provided with fuse, filter and On/Off switch. Oscillator The internal oscillator is a very low noise OCXO with good ratio of short & long term stability. | Front panel | Rear face Information contained in this document is subject to changes without further notice. fp2016a1 Les informations contenues dans ce document sont susceptibles d'etre modifiees sans preavis. fp2016a1 www.timelinkmicro.com. TIMELINK MICROSYSTEMS 14 rue Jean Perrin 31100 Toulouse Tel. : +33 (0)5 62 87 10 70

Abrir o catálogo na página 1

TimeLink microsystems © © © © G ©Specification Reference Frequency 10Mhz Frequency outputs level Isolation between Outputs Phase Noise 10 MHz 13 dBm ±1dBm max on 50 Ohm. Fix value adjusted in factory. 50 dB 1Hz < -100 dBc < - 50 dBc < -90 dBc < ± 5.109 < ± 1.10-12 < ± 1.10-12 < ± 5.10"10 < ± 5.10"9 < ± 3.10"8 = ± 5.10-8 Temps 120 Secondes ± 5.10-8 ± 3.10"7 <AF/F < ± 5.10"7 BNC for frequency Trimmer in front panel Harmonics Distortion Spurious Stability From [0...50°] C 1 second 10 seconds 1 day 1 month 1 year Time to get AF/F Temperature T = 25°C Frequency Adjustment tuning OUTPUTS...

Abrir o catálogo na página 2

TMF1521 1 / 2Páginas

Excertos do catálogo

Todos os catálogos e folhetos técnicos TimeLink microsystems

TMF1521
1 / 2Páginas