Catálogos >
The Charles Machine Works, Inc >
FM13X FLUID MANAGEMENT

FM13X FLUID MANAGEMENT
1 / 2Páginas

Excertos do catálogo

FM13X FLUID MANAGEMENT SYSTEM Powered by an 11.7-hp engine equipped with an optional Includes a new wet hopper design, increasing the venturi inlet from 1.25 to 2 inches—a 60 percent larger opening the needs of mid-size utility-installation jobs. Supports all for material flow and superior fluid mixing. Steep sides sizes of HDD drill units. incorporated in design to help speed mixing cycles. Features a high-performance Flomax ® pump, delivering The tank’s sloping bottom ensures unit effectiveness, allowing drilling fluid to be thoroughly mixed and flow through the pump. E N G IN E E R E D F O R E F F I C IE N C Y A one-piece mixing jet handles 8 bags, yielding up to 950 gallons (3596 L) of fluid in fewer than 8 minutes. Features powder-coated finish, making the unit more durable, economical and resistant to chips, rusting or fading. FLUID MANAGEMENT SYST

Abrir o catálogo na página 1

Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that shown. BDitchWitch ditchwitch.com ©2018 The Charles Machine Works, Inc.

Abrir o catálogo na página 2

FM13X FLUID MANAGEMENT 1 / 2Páginas

Excertos do catálogo

Todos os catálogos e folhetos técnicos The Charles Machine Works

FM13X FLUID MANAGEMENT
1 / 2Páginas