Catálogos >
Tecnotion >
Vacuum-UMV G2 series

Vacuum-UMV G2 series
1 / 2Páginas

Excertos do catálogo

UMV - G2 ironless vacuum series Parameter Winding type Continuous force passive cooled* Continuous force active cooled** Maximum speed*** Peak current Max. cont. current passive cooled* coils @ Tmax Max. cont. current active cooled** Peak force @ 20°C/s increase Motor constant UMV3 G2 coil unit in 150mm magnet yoke Motor force constant Motortype, max voltage ph-ph coils @ Tmax Electrical time constant Maximum continuous power loss Maximum coil temperature Thermal resistance Thermal time constant* Temperature cut-off / sensor Explanation of name U = Ironless MV = Series type/vacuum 3/ 6 / 12 = Number of coils N / S = Winding type Coil unit length Coil unit weight Motor attraction force Lead wire type (Power, 4x) UMV G2 Lead wire weight Lead wire type (Sensor, 4x) * Depends on environmental conditions in the application. Continuous force noted has been determined with a typical thermal resistance value for passive cooling, and a vacuum chamber wall of 40°C. ** Depends on environmental conditions in the application. Continuous force noted has been determined with a thermal resistance of 0.02 K/W and a mounting surface of 20°C when the motor is driven at max. continuous current. *** Actual values depend on bus voltage.

Abrir o catálogo na página 1

Magnet yokes Hole 3 (2x) For Dowelpin DIN7 3h8 (Optional use) UMV Magnet yoke dimensions 30 M4 bolts MAGNET YOKE 390mm Magnet yokes can be butted together. Mounting instructions and flatness or parallelism requirements can be found in the Ironless installation manual. 3D CAD files can be downloaded from our website.

Abrir o catálogo na página 2