Catálogos >
Tecnotion >
UL SERIES

UL SERIES
1 / 2Páginas

Excertos do catálogo

UL Series ironless Parameter Winding type Motortype, max voltage ph-ph 3-phase synchronous ironless, 230Vac rms (325Vdc) magnet @ 25°C Continuous force* Maximum speed** Motor force constant UL3 in 210mm magnet yoke shown Peak force @ 20°C/s increase Peak current Maximum continuous current Motor constant Back EMF phase-phase peak Resistance per phase* Maximum continuous power loss Electrical time constant* Thermal resistance Thermal time constant* Temperature cut-off / sensor Coil unit weight 126 Magnet yokes can be butted together. Coil unit length Magnet yoke dimensions Motor attraction force Cable mass Cable type (power) 4022 363 2034 - Ver. 2.2 Cable type (sensor) * These values are only applicable when the mounting surface is at 20°C and the motor is driven at maximum continuous current. If these values differ in your application, please check our simulation tool. ** Actual values depend on bus voltage. Please check the F/v diagram in our

Abrir o catálogo na página 1

Magnet yokes Coil units 8.2 Coil unit Power cable O 4.3 Thermal sensor cable MAGNET YOKES Hole O3 (2x) For Dowelpin DIN7 O3h8 (Optional use) Optional: Digital Hall Module Mounting instructions and flatness or parallelism requirements can be found in the ironless installation manual. CAD files and 3D models can be downloaded from our website. ©2022 Tecnotion BV - All rights reserved - The contents of this document are subject to change without prior notice.

Abrir o catálogo na página 2