FP 200 ATEX SERIES
1 / 20Páginas

FILTER / EXTRACTION / ENVIRONMENTAL // TECHNOLOGY HUMANS / ENVIRONMENT / MACHINERY

FP 200 ATEX Series Designed for larger dust volumes The FP 211 ATEX and FP 213 ATEX are equipped with special filter-cleaning control and with antistatic filter cartridges, which enable the filter to be freed from dust by compressed air blasts. The units are therefore particularly well suited for applications in which large quantities of dry, combustible dust with a minimum ignition energy of >3mJ are extracted and achieves enormously long service lives compared to systems with saturation filters. Developed according to ATEX directive The systems meet the requirements of the ATEX directive...

Application-dependent filter equipment The filter and extraction system can be equipped with suitable filter cartridges depending on application. A differentiation is made between: Standard: Dedusting processes with dry dusts that can be easily dedusted from the filter-cartridge surface. A polyester fleece cartridge with conductive aluminium coating is used here. The standard filter cartridge represents the optimum between filter efficiency and costs Optional: Processes with dusts that are difficult to dedust, e.g. in connection with precoating. A polyester fleece cartridge with PTFE and...

Filter-cleaning control The FP 200 ATEX series is equipped with special filter-cleaning control, which enables the filter cartridge to be automatically freed from dust and thus increase the filter service life enormously. Depending on the application, different options can be parameterized by the customer: Differential-pressure controlled dedusting (factory setting) . The system continuously measures the current filter saturation and automatically starts the dedusting cycle when a set value is reached (factory setting: 75% filter saturation). Interval dedusting (parameterizable via...

Long service life due to effective filter cleaning Filter cartridge in operation The FP 211 and FP 213 ATEX are equipped with six dedustable filter cartridges of dust class M. The filter cartridges are made of IFA-tested filter material (dust class M), which enables an optimized dedusting due Filter cartridge after dedusting to its special folding. Depending on the application, specially coated variants can be used. Please contact the TBH sales department. Application-dependent motor selection TBH offers a selection of different motor concepts in its product range to ensure the optimum...

Inspiring control Continuous full control over the system A - Start / Stop button B - Manual power control C - Manual start of filter-cartridge dedusting 1 - Saturated filter notification 2 - System status indication 3 - Power-setting indication/ Hour meter 4 - Temperature and turbine-status indication 5 - Filter status indication SUB-D 25 interface External control of the system Powerful control unit Start / Stop button "Filter full" pre-warning stage (75%) Group-error output (speed, temperature, "filter full" 100%) . External power control . Parameterization access for activating special...

Refilling work, packaging processes, feeding and conveying processes When materials are moved from one place to another, such as during packaging or transportation, this process can cause particles to be released. Especially since they are not visible to the human eye, the risk should not be underestimated. Particles can develop from turbulences. TBH filter and extraction systems safely remove these particles from the ambient air. Mechanical processing (grinding, deburring, milling, drilling, cutting) Processes such as grinding, deburring, milling, drilling or cutting generate dust, vapours...

System configuration FP 200 ATEX Series For easy configuration of your desired TBH filter and extraction system type FP 211 or FP 213, please observe the following steps: Depending on the application, select the suitable system based on its performance data (Fig. 2). In the FP 211 ATEX and the FP 213 ATEX, antistatic filter cartridges are used as standard. Depending on the application, special filter cartridges can also be used. Please contact the TBH sales department. To ensure ATEX protection for the systems, an intermediate module with a special particle filter (H13) is used as a safety...

System configuration FP 200 ATEX Series D - Selection of intake socket Select the intake socket of your system (position and diameter) from (Fig. 4). Please note any existing connections, e.g. to laser systems or similar. Please also pay attention to a reasonable dimensioning of the line cross-sections in relation to your application (air velocity, pressure loss). E - Selection of filter dedusting The system is factory-delivered with the function "Differential-pressure controlled dedusting". When the filter saturation reaches the set value, the system automatically starts its dedusting...

Technical data FP 211 ATEX Delivery scope: . Completely assembled (incl. the selected filter equipment) . Base stands (suitable for forklift trucks) . Crane eyelets (optional) . Power cord * you can choose between two filter materials HUMANS / ENVIRONMENT/ MACHINERY

Ordering data FP 211 ATEX BASIC MODEL A DESIGNATION 6 x filter cartridges, antistatic PTFE Filter-housing module Particle filter Antistatic filter-cartridge set, pack of 6, PTFE Particle filter Rear side* * Indicates position only 2 x activated carbon filter ** Sleeve dimension SPARE FILTER Filter cartridge set, antistatic, pack of 6 * r educes the extraction capacity of the system by approx. 20% - alternatively, an additional filter module can be connected downstream of the system so that the capacity is not negatively affected (see accessories from page 18 onwards) INTAKE SOCKET FILTER...

Technical data FP 213 ATEX Delivery scope: . Completely assembled (incl. the selected filter equipment) . Base stands (suitable for forklift trucks) . Crane eyelets (optional) . Power cord * you can choose between two filter materials HUMANS / ENVIRONMENT/ MACHINERY