Ultrasonic flow meter
1 / 7Páginas

E-mail: info@supmea.com Ultrasonic flow meter Committed to process automation solutions Add : 5th floor, Building 4, Singapore Hangzhou Science Technology Park, Hangzhou Economic Development Area, 310018, Hangzhou, China

E-mail: info@supmea.com Introduction 1158-J-SUP ultrasonic flow meter uses advance circuit design,coupled with excellent hardware designed in English and can be switched surfaces.It is easy to operate and with stable performance. This wall mounted ultrasonic flow meter with clamp on sensor is used in testing equipment filter elements for water purifier. It could be also installed in some residential areas and commonly used for testing water supply and monitoring.With functions like ARM,FPGA chip,low voltage and wide pulse transmission technology design can this ultrasonic flow meter reach a...

E-mail: info@supmea.com OCT Pulse output: 0-5000Hz. Analog output : 4 ~ 20mA, max load 750Ω. Communication interface Power supply 16 ( 4×4 ) key with tactile action. 20×2 lattice alphanumeric, back lit LCD. Common 0~80℃(80~150℃ high temperature optional) Physical specifications Transmitter Transducer cable Standard cable length: 30 ft (9m). Transmitter: approximately 0.7kg Transducer: approximately 0.4kg Product overview Add : 5th floor, Building 4, Singapore Hangzhou Science Technology Park, Hangzhou Economic Development Area, 31001

E-mail: info@supmea.com Installation Transmitter Take out the enclosed screws and plastic bushings. Insert the plastic bushings into the installing holes. Put the flowmeter to the position and screw it in. Add : 5th floor, Building 4, Singapore Hangzhou Science Technology Park, Hangzhou Economic Development Area, 310018, Hangzhou, China

E-mail: info@supmea.com www.supmea.com Position drawing A "Position Drawing" is in the packing. Please use it as a template in the place that you are going to install the Flowmeter. Then drill 4 installing holes at the screws position shown on the drawing with the 5.0mm drill. Wiring Transmitter wiring Add : 5th floor, Building 4, Singapore Hangzhou Science Technology Park, Hangzhou Economic Development Area, 310018, Hangzhou, China

E-mail: info@supmea.com Lengthened cable Add : 5th floor, Building 4, Singapore Hangzhou Science Technology Park, Hangzhou Economic Development Area, 310018, Hangzhou, China

E-mail: info@supmea.com