SUP-DY2900 dissolved oxygen meter
1 / 8Páginas

E-mail: info@supmea.com Dissolved oxygen meter Committed to process automation solutions SUP-DY2900 Add : 5th floor, Building 4, Singapore Hangzhou Science Technology Park, Hangzhou Economic Development Area, 310018, Hangzhou, China

E-mail: info@supmea.com SUP-DY2900 Dissolved oxygen online analyzer, an intelligent online chemical analyzer. The cap of the sensor is coated with a luminescent material. Blue light from an LED illuminates the luminescent chemical. The luminescent chemical instantly becomes excited and releases red light. The time and intensity of red light are inversely proportional to the concentration of oxygen molecules, so the concentration of oxygen molecules is calculated. Features ￭ Support dissolved oxygen(DO), saturation(SAT),oxygen partial pressure(OPP) and temperature measure. ￭ Support...

E-mail: info@supmea.com ￭ Sensor design: – Oxygen-sensitive molecules (markers) are integrated in an optically active layer (fluorescence layer). – The surface of the fluorescence layer is in contact with the medium. – The sensor optics are directed at the underside of the fluorescence layer. ￭ There is an equilibrium between the oxygen partial pressure in the medium and that in the fluorescence layer: – If the sensor is immersed in the medium, the equilibrium is established very quickly. ￭ Measuring process: – The sensor optics send green light pulses to the fluorescence layer. – The...

E-mail: info@supmea.com Controller specification Measurement variables Dissolved oxygen, saturation, oxygen partial pressure Measuring range Temperature measurement type Auto A/manual H Measuring range Output type 4 - 20mA current transmission output Max.loop resistance Output type RS485 digital signal output Communication protocol Standard MODBUS-RTU (customizable) Power supply Alarm relay Add : 5th floor, Building 4, Singapore Hangzhou Science Technology Park, Hangzhou Economic Development Area, 310018, Hang

E-mail: info@supmea.com Sensor specification Specifications 1.4KG SUS316L+PVC (Ordinary Version), Titanium Alloy (Seawater Version) Main Material O-ring: Fluoro-rubber Cable: PVC Waterproof Rate Measurement Range Indication Resolution Storage Temperature Environment Temperature Pressure Range Power Supply Automatic air calibration,Sample calibration Cable Length Standard 10-Meter Cable, Max Length: 100 Meters Warranty Period Add : 5th floor, Building 4, Singapore Hangzhou Science Technology Park, Hangzhou Economic Development Area, 310018, Hangzh

E-mail: info@supmea.com Measures Measure principle Measure ranges Optical measure by luminescence 0,00 to 20,00 mg/L 0,00 to 20,00 ppm 0-200% Response time 90% of the value in less than 60 seconds Frequency of recommended measure Water move Temperature compensation Stocking temperature Signal interface Modbus RS-485 (standard) and SDI-12 (option) Sensor power-supply 5 to 12 volts Standby 25 µA Average RS485 (1 measure/ seconde) : 4,4mA Average SDI12 (1 measure/ seconde) : 7,3mA Current pulse : 100 mA Sensor Dimensions Stainless steel version 450g (sensor + cable 3 m) Titanium version 300 g...

E-mail: info@supmea.com dissolved oxygen transmitter Open a 92.5 * 92.5(mm) installation hole on the instrument cabinet or installation panel (the dimension is 100*100*150mm). Insert the instrument into the installation hole and latch on the butterfly clasp, as shown below. ②dissolved oxygen sensor Add : 5th floor, Building 4, Singapore Hangzhou Science Technology Park, Hangzhou Economic Development Area, 310018, Hangzhou, China

E-mail: info@supmea.com Wiring diagram +12VDC: Power supply of dissolved oxygen electrode AGND: Power negative of dissolved oxygen electrode RS485-A: Dissolved oxygen electrode communication-A RS485-B: Dissolved oxygen electrode communication-B NC: Null RS485(A+): RS485 communication interface A+ Optical Dissolved Oxygen Online Analyzer – Operation Manual RS485(B-): RS485 communication interface BI(+): 4-20mA output port + I(-): 4-20mA output port HO: High alarm of normal open relay HC: High alarm of normal close relay COM: Common port LO: Low alarm of normal open relay LC: Low alarm of...