Catálogos >
STS Sensor Technik Sirnach AG >
ATM.ECO/IS Analog Transmitter with Temperature compensation

ATM.ECO/IS Analog Transmitter with Temperature compensation
1 / 8Páginas

Excertos do catálogo

ATM.ECO/IS Analog Transmitter with Temperature compensation - 1

Pressure Transmitter - FM / FM-C certified ATM.ECO/IS - Analog Transmitter with Temperature compensation CUSTOMER BENEFITS • Certificate: FM, FM-C & IECEx & ATEX • Entry level series into precision pressure measurement • High accuracy is ensured by sophisticated digital temperature compensation algorithms • Fast customization thanks to configurable product design • Reverse polarity and short circuit protected, with integrated overvoltage protection

Abrir o catálogo na página 1

ATM.ECO/IS Analog Transmitter with Temperature compensation - 2

Long term stability, (7) < 0.5% FS / < 4 mbar < 0.2% FS / < 4 mbar < 0.1% FS / < 0.2% FS Burst pressure, (4) > 850 / < 1500 bar > 1500 bar Response time, (typ.) < 1ms / 10 ... 90% FS < 1ms / 10 ... 90% FS Long term stability, (7) < 0.1% FS / < 0.2% FS < 0.1% FS / < 0.2% FS (2) Overpressure and burst pressure 1500 bar (stainless steel) optional (3) Process connection frontal and flush diaphragm availables 600 bar (5) Zero based accuracy according to DIN-16086, incl. hysteresis and repeatability at ambient temperature (6) Total error including accuracy and...

Abrir o catálogo na página 2

ATM.ECO/IS Analog Transmitter with Temperature compensation - 3

Power supply Supply influence Circuit diagram Load resistance Load influence < 0.05% FS Reverse polarity protection Pout to +Vin Certificate, (1) SEV 09 ATEX 0108 X IECEx SEV 10.0003 X IECEx MSC 14.0002 X Dust II 1D Ex ia IIIC IP6x T140°C EN 61241-0 / -11 intrinsically safe circuit (1) For detailed Ex specifications see certificate and operating and safety instructions (2) Without any information about temperature class the transmitter will be delivered for T4

Abrir o catálogo na página 3

ATM.ECO/IS Analog Transmitter with Temperature compensation - 4

Description Level Typical interferences mmpp) EN 60068-2-27 Shock 100 G (impulse duration 6 ms) EN 55022 Emission, class B < 30 dBpV/m (0.03 ... 1 EN 61000-4-3 Irradiated RF 10V/m (0.08 ... 2.7 GHz, 3s) Radio sets, wireless phones EN 61000-4-4 Transients (burst) 4 kV Motors, valves Line-Earth: 1 kV/42 Q EN 61000-4-6 Conducted RF 3 V (0.15 ... 80 MHz, 3 s) Frequency converters Transducer Stainless steel (316L / 1.4404) Seals Viton (Standard), EPDM,

Abrir o catálogo na página 4

ATM.ECO/IS Analog Transmitter with Temperature compensation - 5

Cable Socket Connector Article number

Abrir o catálogo na página 5

ATM.ECO/IS Analog Transmitter with Temperature compensation - 7

(3) Process connection available < 600 bar (4) Cable socket connector not included (5) Please specify the required cable length and medium (6) For operating temperature > 50°C, FEP cable must be used (7) Only with pressure connection Fig. 2, Fig. 3, Fig. 6 and Fig. 7 (16) Connector side not to be used in Zone 0 or Ex ia IIC, explosion risk

Abrir o catálogo na página 7

ATM.ECO/IS Analog Transmitter with Temperature compensation - 8

Pressure connections Electrical Connections Version for medium temperature up to 125°C Pin 2-wire L - 25 mm for connector DIN 43650 E EP (only Ex) Version for medium temperature >125°C up to 150°C socket connector L ^ 52 mm for connector DIN 43650 Pin 2-wire UiTTF 5 EP (only Ex) socket connector Pin 2-wire white +Vin yellow Pout socket connector 3 Pout 4 +Vin Specifications may change without notice. STS Headquarters, Switzerland: STS Sensor Technik Sirnach AG Rutihofstrasse 8 | 8370 Sirnach | Switzerland sales@stssensors.com | www.stssensors.com STS Germany: STS Sensoren Transmitter...

Abrir o catálogo na página 8