TSX923
1 / 32Páginas

Excertos do catálogo

TSX920, TSX921, TSX922, TSX92310 MHz rail-to-rail CMOS 16 V operational amplifiers Datasheet - production data Features • Rail-to-rail input and output • Wide supply voltage: 4 V - 16 V • Gain bandwidth product: 10 MHztyp at 16 V • Low power consumption: 2.8 mA typ per amplifier at 16 V • Unity gain stable • Low input bias current: 10 pA typ • High tolerance to ESD: 4 kV HBM • Extended temperature range: -40 °C to 125 °C • Automotive qualification Related products • See the TSX5 series for low-power features • See the TSX6 series for micro-power features • See the TSX929 series for higher speeds • See the TSV9 series for lower voltages Applications • Communications • Process control • Test equipment Description The TSX92x single and dual operational amplifiers (op amps) offer excellent AC characteristics such as 10 MHz gain bandwidth, 17 V/ms slew rate, and 0.0003 % THD+N. These features make the TSX92x family particularly well-adapted for communications, I/V amplifiers for ADCs, and active filtering applications. Their rail-to-rail input and output capability, while operating on a wide supply voltage range of 4 V to 16 V, allows these devices to be used in a wide range of applications. Automotive qualification is available as these devices can be used in this market segment. Shutdown mode is available on the single (TSX920) and dual (TSX923) versions enabling an important current consumption reduction while this function is active. The TSX92x family is available in SMD packages featuring a high level of integration. The DFN8 package, used in the TSX922, with a typical size of 2x2 mm and a maximum height of 0.8 mm offers even greater package size reduction. Table 1: Device summary This is information on a product in full production. www

Abrir o catálogo na página 1

Package pin connections Figure 1: Pin connections (top view)

Abrir o catálogo na página 3

Absolute maximum ratings and operating conditions Table 2: Absolute maximum ratings (AMR)

Abrir o catálogo na página 4

Table 4: Electrical characteristics at VCC+ = 4.5 V with VCC- = 0 V, Vicm = VCC/2, Tamb = 25 °C, and RL = 10 kQ connected to VCC/2 (unless otherwise specified)

Abrir o catálogo na página 5

Notes: Typical value is based on the Vio drift observed after 1000 h at 125 °C extrapolated to 25 °C using the Arrhenius law and assuming an activation energy of 0.7 eV. The operational amplifier is aged in follower mode configuration (see Section 5.5: "Long term input offset voltage drift"). (2) When used in comparator mode, with high differential input voltage, during a long period of time with VCC close to 16 V and Vicm>VCC/2, Vio can experience a permanent drift of a few mV drift. This phenomenon is notably worse at low temperatures.

Abrir o catálogo na página 6

Table 5: Electrical characteristics at VCC+ = 10 V with VCC- = 0 V, Vicm = VCC/2, unless otherwise specified)

Abrir o catálogo na página 7

Notes: ( 'Typical value is based on the Vio drift observed after 1000 h at 125 °C extrapolated to 25 °C using the Arrhenius law and assuming an activation energy of 0.7 eV. The operational amplifier is aged in follower mode configuration (see Section 5.5: "Long term input offset voltage drift"). (2) When used in comparator mode, with high differential input voltage, during a long period of time with VCC close to 16 V and Vicm>VCC/2, Vio can experience a permanent drift of a few mV drift. This phenomenon is notably worse at low temperatures.

Abrir o catálogo na página 8

Table 6: Electrical characteristics at VCC+ = 16 V with VCC- = 0 V, Vicm = VCC/2, unless otherwise specified)

Abrir o catálogo na página 9

Abrir o catálogo na página 10

Figure 3: Distribution of input offset voltage at VCC = 4.5 V -2-10 1 2 Input Offset Voltage(mV) Figure 6: Input offset voltage vs. temperature at VCC = 16 V

Abrir o catálogo na página 11

Figure 15: Bode diagram vs. temperature for VCC = 4 V Figure 19: Bode diagram at VCC = 16 V with high common-mode voltage 250 200 150 100 50 C

Abrir o catálogo na página 13

Electrical characteristic curves Figure 20: Bode diagram at VCC = 16 V and RL = 10 kΩ, CL = 47 pF Figure 21: Bode diagram at VCC = 16 V and RL = 10 kΩ, CL = 120 pF Figure 22: Bode diagram at VCC = 16 V and RL = 2.2 kΩ, CL = 20 pF Figure 23: Slew rate vs. supply voltage and temperature Figure 24: Overshoot vs. capacitive load without feedback capacitor Figure 25: Closed loop gain vs. frequency with different gain resistors

Abrir o catálogo na página 14

Electrical characteristic curves Figure 26: Large step response Figure 27: Small step response Figure 28: Small step response with feedback capacitor CF Figure 29: Output impedance vs. frequency in closed loop configuration Figure 30: Noise vs. frequency with 16 V supply voltage

Abrir o catálogo na página 15

Figure 36: Startup time after standby released for VCC = 4 V Figure 37: Startup time after standby released for VCC = 16 V 20.00 17.50 15.00

Abrir o catálogo na página 16

Application information Application information Operating voltages The TSX92x operational amplifiers can operate from 4 V to 16 V. The parameters are fully specified at 4.5 V, 10 V, and 16 V power supplies. However, parameters are very stable in the full VCC range. Additionally, main specifications are guaranteed in the extended temperature range from -40 to 125 °C. Rail-to-rail input The TSX92x series is designed with two complementary PMOS and NMOS input differential pairs. The device has a rail-to-rail input and the input common mode range is extended from (VCC-) - 0.1 V to (VCC+) + 0.1...

Abrir o catálogo na página 17

Input offset voltage drift over temperature The maximum input voltage drift over the temperature variation is defined as the offset variation related to offset value measured at 25 °C. The operational amplifier is one of the main circuits of the signal conditioning chain, and the amplifier input offset is a major contributor to the chain accuracy. The signal chain accuracy at 25 °C can be compensated during production at application level. The maximum input voltage drift over temperature enables the system designer to anticipate the effect of temperature variations. The maximum input...

Abrir o catálogo na página 18