Catálogos >
SOUTHCO >
AV Series Dynamic Mount

AV Series Dynamic Mount
1 / 4Páginas

Excertos do catálogo

AV Series Dynamic Mount • Intuitive grab and move operation enhances the user experience No knobs or tools required to reposition the display Robust positioning in compact package Holds securely, even in applications with dynamic loading • Consistent repeatable operation • Fully enclosed for optimum cleanability Product Detail ACTUAL SIZE Forward Torque Reverse Torque Installation 1. Determine desired mounting Installation location 2. Attach using M6 screws as shown Caution: Because of the wide variety of available materials, it is the installer’s responsibility to ensure that the materials, and structure to which the tilt mount is fastened will provide adequate support. 3. Attach display using manufacturer’s recommended hardware VESA® MIS-D, 100, C VESA and VESA MOUNTING COMPLIANT are registered trademarks of Video Electronics Standards Association Other options available. For complete details on variety, part numbers, installation and specification, go to Dimensions in millimeters (inch) unless otherwise stated

Abrir o catálogo na página 1

Specification and Selection Step 1 Determine display weight and distance (d) from mounting surface to center of gravity. Smooth operation enhances the user experience • Adjust the display without knobs or tools • Holds securely Step 2 Use chart below to select part number. Display Weight Material and Finish AV-D25 T-Series Model Selection Guide Steel, Aluminum alloy, powder coated Performance Details Cycle performance: 20,000 cycles within ± 20% of static torque specification Max. dynamic working load: 100 N (22.5 lb) Average ultimate load: 1065 N (240 lb) Part Number See table Step 3...

Abrir o catálogo na página 2

AV Series Dynamic Mount • Intuitive grab and move operation enhances the user experience No knobs or tools required to reposition the display Precise control of operating effort ensures ideal “feel” Holds securely, even in applications with dynamic loading • Consistent repeatable operation • Fully enclosed for optimum cleanability Display Tilt ±20 range of motion from position shown 1. Determine desired mounting 31±.02 location (1.22±.008) 2. Attach using M5 X 0.8 screws as shown Caution: Because of the wide variety of available wall materials, it is the installer’s responsibility to ensure...

Abrir o catálogo na página 3

Tilt Specification and Selection Step 1 Determine display weight and distance (d) from mounting surface to center of gravity. • Smooth operation enhances the user experience • Adjust the display without knobs or tools • Holds securely Material and Finish Aluminum alloy, powder coated Performance Details Cycle performance: 20,000 cycles within ± 20% of static torque specification Maximum dynamic working load: Model 101 and 103: 70 N (15.7 lbf) Model 102: 100 N (22.5 lbf) Average ultimate load: 1845 N (414.8 lbf) Part Number See table Step 3 Complete part number by selecting model and color...

Abrir o catálogo na página 4