47, 4C series
1 / 36Páginas

47 Captive ScrewsStyled knob series • M3 thread size ■ • Smooth knob meets UL-1950 • Designed for hand operation • Spring ejected • Wide variety of sizes, recesses and installation options Recess Styles Slotted No. 1 Phillips T10 TORX® T10 TORX®/ No. 1 Phillips / Slot Combination Slot Combination Material and Finish Ferrule: Press-in: Hardened carbon steel, zinc plated, chromate, plus sealer Flare-in and Floating: Aluminum, natural P.C. board style: 300 Series stainless steel, passivated Knob: Aluminum, natural or black powder coated Screw: Hardened carbon steel, zinc plated, chromate, plus sealer Installation Notes See pages 468-469, 543 Notes Knob Height and Screw Projection (Flare-in style shown) Unfastened Unfastened Fastened To ensure you receive SOUTHCO® quality parts, look for the segmented circle Installation Styles Flare-In Style _0 10.6_ TORX is a registered trademark of ACUMENT® Intellectual Properties, LLC Dimensions in millimeters (inch) unless otherwise stated

Part numbers in shaded rows (shown in table) are fully retracting in minimum panel thickness To add a black powder coated finish, change the part number from the table as shown: Change 1 to 5: 47-80-102-14 For a smooth knob, change the part number from the table as shown: Change 0 to 1: 47-90-161-20 47-90-161-21 Change 4 to 5: 47-90-101-24 Part Number See table All screw part numbers shown in table are for a natural knob finish and a knurled knob For black finish and smooth knob options, minimums may apply southcor TORX is a registered trademark of ACUMENT® Intellectual Properties,...

47 Captive ScrewsStyled knob series • M3.5 thread size ■ • Smooth knob meets UL-1950 • Designed for hand operation • Spring ejected • Wide variety of sizes, recesses and installation options Recess Styles Slotted No. 2 Phillips T15 TORX® T15 TORX® / No. 2 Phillips / Slot Combination Slot Combination Material and Finish Ferrule: Press-in: Hardened carbon steel, zinc plate, chromate, plus sealer PC. board: 300 Series stainless steel, passivated Flare-in, floating and snap-in: Aluminum, natural Knob: Aluminum, natural or black powder coated Screw: Hardened carbon steel, zinc...

Part numbers in shaded rows (shown in table) are fully retracting in minimum panel thickness To add a black powder coated finish, change the part number from the table as shown: For a smooth knob, change the part number from the table as shown: Change 0 to 1: 47-90-161-20 Part Number See table All screw part numbers shown in table are for a natural knob finish and a knurled knob For black finish and smooth knob options, minimums may apply southcor TORX is a registered trademark of ACUMENT® Intellectual Properties, LLC Dimensions in millimeters (inch) unless otherwise stated

Styled knob series · M4 thread size • Designed for hand operation • Spring ejected • Wide variety of sizes, recesses and installation options Recess Styles Slotted T25 TORX® / Slot Combination No. 2 Phillips / Slot Combination Material and Finish Ferrule: Press-in: Hardened carbon steel, zinc plate, chromate, plus sealer Flare-in, floating and snap-in: Aluminum, natural Knob: Aluminum, natural or black powder coated ACTUAL SIZE Knob Height and Screw Projection (Flare-in style shown) Screw: Hardened carbon steel, zinc plated, chromate, plus sealer 1 (.04) Screw projection for TORX® and ®...

To add a black powder coated finish, change the part number from the table as shown: Change 1 to 5: 47-80-102-14 Part numbers in shaded rows (shown in table) are fully retracting in minimum panel thickness For a smooth knob, change the part number from the table as shown: Change 0 to 1: 47-90-161-20 Part Number See table All screw part numbers shown in table are for a natural knob finish and a knurled knob For black finish and smooth knob options, minimums may apply southcor TORX is a registered trademark of ACUMENT® Intellectual Properties, LLC Dimensions in millimeters (inch) unless...

Styled knob series · M5 thread size • Designed for hand operation • Spring ejected • Wide variety of sizes, recesses and installation options Recess Styles Slotted T25 TORX® / Slot Combination No. 2 Phillips / Slot Combination Material and Finish Ferrule: Press-in: Hardened carbon steel, zinc plate, chromate, plus sealer Flare-in, floating and snap-in: Aluminum, natural Knob: Aluminum, natural or black powder coated ACTUAL SIZE Knob Height and Screw Projection (Flare-in style shown) Screw: Hardened carbon steel, zinc plated, chromate, plus sealer 1 (.04) Screw projection for TORX® and ®...

Part numbers in shaded rows (shown in table) are fully retracting in minimum panel thickness To add a black powder coated finish, change the part number from the table as shown: Change 1 to 5: 47-80-102-14 For a smooth knob, change the part number from the table as shown: Change 0 to 1: 47-90-161-20 Part Number See table All screw part numbers shown in table are for a natural knob finish and a knurled knob For black finish and smooth knob options, minimums may apply southcor TORX is a registered trademark of ACUMENT® Intellectual Properties, LLC Dimensions in millimeters (inch) unless...

Styled knob series · M6 thread size • Designed for hand operation • Spring ejected • Wide variety of sizes, recesses and installation options Recess Styles No. 2 Phillips T30 TORX® / Slot Combination No. 2 Phillips / Slot Combination Material and Finish Ferrule: Press-in: Hardened carbon steel, zinc plate, chromate, plus sealer Flare-in and Floating: Aluminum, natural Knob: Aluminum, natural or black powder coated ACTUAL SIZE Knob Height and Screw Projection (Flare-in style shown) Screw: Hardened carbon steel, zinc plated, chromate, plus sealer Installation Notes 1 (.04) Screw projection ®...

Part numbers in shaded rows (shown in table) are fully retracting in minimum panel thickness To add a black powder coated finish, change the part number from the table as shown: Change 1 to 5: 47-80-102-14 For a smooth knob, change the part number from the table as shown: Change 0 to 1: 47-90-161-20 Part Number See table All screw part numbers shown in table are for a natural knob finish and a knurled knob For black finish and smooth knob options, minimums may apply southcor TORX is a registered trademark of ACUMENT® Intellectual Properties, LLC Dimensions in millimeters (inch) unless...