Catálogos >
SMC PNEUMATIC >
standard cylinder

standard cylinder
1 / 84Páginas

Excertos do catálogo

Improved wear resistance The bearing portions of the rod cover and the clevis have been improved in wear resistance to ensure the longevity of the cylinder. Easy installation The Installation Is simple because a tool can be placed directly over the cover for High speed actuation possible Either the rubber bumper or the air cushion can be selected according to the drive speed conditions. Therefore, it can support high speed drives. (Standard equipment) Reduced piston rod deflection The clearance between the bushing and the piston rod has been decreased to achieve higher accuracy, thus decreasing the deflection of the piston rod. Series Variations Spring retui ipring extend) Built-in Speed Controller Direct Mount Spring retui Spring extend) Direct Mount, Non-Rotating Rod Spring retui ipring extend) Low-speed cylinder

Abrir o catálogo na página 1

Combinations of Standard Products and Made Made to Order specifications Special product (Contact SMC for details.) Double acting Single acting (spring return) (spring extend) Built-in magnet bore size Double acting Single acting (spring return) (spring extend) (Built-in speed controller) Double acting Double acting (Direct mount) Double acting Single acting (spring return) (spring extend) (Direct mount, Non-rotating) Double acting Single acting (spring return) (spring extend) Double acting Double acting Special port position (5)(7) Adjustable stroke cylinder/Adjustable retraction type (7)...

Abrir o catálogo na página 2

Air Cylinder: Standard Type Double Acting, Single Rod * Bore size Mounting style With auto switch Band mounting style Cylinder standard stroke (mm) Refer to the standard stroke table on page 43. Built-in Magnet Cylinder Model Suffix the symbol "-A" (Rail mounting style) or :'-B" (Band mounting style) to the end of part number for cylinder with auto switch. ■ For rail mounting style, screws and nuts for 2 pes switches come with the rail ■Refer to page 123 for switch mounting With auto switch (Built-in magnet) Head cover port location Refer to page 43 for details * For configuration, refer to...

Abrir o catálogo na página 3

Air Cylinder: Standard Type Double Acting, Single Rod SeneS Double acting, Single rod * Manufacture of intermediate strokes at 1 mm intervals is possible. (Spacers are not used.) Head Cover Port Location_ Either perpendicular to the cylinder axis or in-line with the cylinder axis is available for basic style. (06 is available only as in-line style.) Referto pages 117 to 123 for cylinders with auto switches. • Minimum stroke for auto switch mounting • Proper auto switch mounting position (detection at stroke end) and mounting height • Operating range • Switch mounting bracket part no. Made...

Abrir o catálogo na página 4

Mounting Style and Accessory/For details, referto page 51. • Pin and snap ring are shipped together with double clevis and double knuckle joint. Mounting Bracket Part No. ► T-bracket is used with double clevis (D). basic mass. ** Mounting nut is not attached to the double clevis style, so the mounting nut mass is already • Mounting bracket mass •• 8 (Axial foot style) Be sure to read before handling. Refer to front matters 54 and 55 for Safety Instructions and pages 3 to 11 for Actuator and Auto Switch Precautions. 1. During installation, secure the rod cover and tighten by applying an...

Abrir o catálogo na página 5

Air Cylinder: Standard Type Double Acting, Single Rod Series Clean Series Copper and Fluorine-free Cylinder 10-CJ2 Mounting style Bore size H Stroke Headcover port location Clean Series Air cylinder which is applicable for the system which discharges leakage from the rod section directly into the outside of clean room by relief port and making an actuator's rod section having a double seal construction. 20-CJ2 Mounting style Bore size H Stroke Headcover port location Eliminates the effects by copper based ions and fluorine based resins, etc. over the color cathode ray tube. Making copper...

Abrir o catálogo na página 6

Construction (Not able to disassemble) Piston construction when auto switch is mounted. Component Parts Dedicated for with Air Cushion Type

Abrir o catálogo na página 7

Air Cylinder: Standard Type Double Acting, Single Rod CJ2BI Bore size H Stroke | [Head cover port location Piping port Head cover port location: With air cushion: CJ2B [Bore size H Stroke A Head cover port location * For details of the mounting nut, refer to page 51. Piping port Head cover port Material: Iron With Air CUShion/Dimensions other than the table below are the same as the table above, (mm)

Abrir o catálogo na página 8

Axial Foot Style (L) CJ2L Bore size H Stroke Head cover port location Cover surface Mounting hole Cover surface Piping port Rod cover side Head cover side Piping port Head cover port location: With air cushion: CJ2L Bore size - Stroke A Head cover port location For details of the mounting nut, refer to page 51 Piping port Head cover port location: Material: Iron With Air Cushion/Dimensions other than the table below are the same as the table above, (mm)

Abrir o catálogo na página 9

Air Cylinder: Standard Type Double Acting, Single Rod Rod Side Flange Style (F) CJ2F [Bore size H Stroke | Head cover port location Cover surface Rod end nut Nflj Piping port Mounting hole Rod cover Head cover side side Piping port Cover surface Head cover port location: With air cushion: CJ2F Bore size - Stroke A Head cover port location Cover surface * For details of the mounting nut, refer to page 51. Piping port Head cover port location: Material: Iron With Air Cushion/Dimensions other than the table below are the same as the table above, (mm)

Abrir o catálogo na página 10

Double Clevis Style (D) CJ2D Bore size - Stroke ■ Clevis pin and retaining ring are shipped together. With air cushion: CJ2D Bore size - Stroke A Material: Iron ■ Clevis pin and retaining ring are shipped together. T-bracket Dimensions_(mm) With Air Cushion/Dimensions other than the table below are the same as the table above, (mm)

Abrir o catálogo na página 11

Air Cylinder: Standard Type . f% ag* Double Acting, Single Rod Senes LsJZ Accessory Bracket Dimensions Single Knuckle Joint Material: Stainless steel Material: Rolled steel Double Knuckle Joint ■ For 010 double clevis style, with air cushion and built- ■ Clevis pins are shipped with retaining rings. Material: Stainless steel < For size 010, clevis pin is diverted. ■ Knuckle pins are shipped with retaining rings. Material: Rolled steel Material: Brass Material: Iron < Knuckle pin and retaining ring are shipped together. non-rotating type.) Double clevis style cylinder « T-bracket includes...

Abrir o catálogo na página 12